BLUE JAY BJ-MCM1300 Manual de usuario

User Manual

Tel: +0086-023-67628702 Email:[email protected]

www.cqbluejay.com

Add: 1802,Building 2,No.88,Jianxin East Road,Chongqing,400020,China - 1 -

Multi-channel Circuit Metering System

BJ-MCM1300

User Manual

Version：1.7

User Manual

Tel: +0086-023-67628702 Email:[email protected]

www.cqbluejay.com

Add: 1802,Building 2,No.88,Jianxin East Road,Chongqing,400020,China - 2 -

Read me

When you use BJ-MCM1000 series Multi-channel Circuit Metering system, be sure to

read this user manual carefully, and be able to fully understand the implications, the correct

guidance of operations in accordance with user manual, which will help you make better

use of BJ-MCM1000, and help to solve the various problems at the scene.

1. Before the meter turning on the power supply, be sure that the power supply within the

provisions of the instrument;

2. When installation, the current input terminal must non-open, voltage input terminals must

Non-short circuit;

3. Communication terminal (RS232/RS485 or Ethernet) is strictly prohibited to impose on high

pressure;

4. Be sure the instrument wiring consistent with the internal system settings;

5. When communicating with the PC, instrument communication parameters must be consistent

with the PC.

●Please read this user manual carefully

●Please save this document

 User Manual 
Tel: +0086-023-67628702 Email:tech@cqbluejay.com 
www.cqbluejay.com 
Add: 1802,Building 2,No.88,Jianxin East Road,Chongqing,400020,China - 3 -
Directory 
 
CONTENTS Page 
 
- SUMMARIZE.................................................................................................................................- 4 -
-ELECTRICITYMETERING........................................................................................................ - 5-
- SPECIFICATIONS........................................................................................................................- 6 -
- INSTALLATION AND START-UP.................................................................................................- 8 -
1.-INSTALLATION............................................................................................................................ - 8-
2. -CONNECTION TERMINAL ...........................................................................................................- 11 -
SCREEN DISPLAY .......................................................................................................................- 13 -
1. -PANEL DIAGRAM...................................................................................................................... - 13 -
2.-DISPLAY UNIT CONNECTION ...................................................................................................... - 13 -
- OPERATION MODE ...................................................................................................................- 14 -
- SETUP PROCEDURE ................................................................................................................- 18 -
1.-INPUT PASSWORD.................................................................................................................... - 18 -
2.-MENU TREE QUICK GUIDE ......................................................................................................... - 18 -
3. –DETAILS EXPLAIN OF MENU STRUCTURE................................................................................... - 20 -
4.-DISPLAY CHARACTER INSTRUCTIONS ........................................................................................ - 21 -
- COMMUNICATION INTERFACE.................................................................................................- 22 -
1.-CONNECTION FOR THE RS485 BUS......................................................................................... - 22 -
2.-MODBUS ©PROTOCOL .......................................................................................................... - 22 -
3. -REGISTERADDRESS TABLE ...................................................................................................... - 23 -
4.-EXAMPLE................................................................................................................................. - 29 -
- SAFETY CONSIDERATIONS ....................................................................................................- 30 -
- MAINTENANCE........................................................................................................................- 30 -
 

User Manual

Tel: +0086-023-67628702 Email:tech@cqbluejay.com

www.cqbluejay.com

Add: 1802,Building 2,No.88,Jianxin East Road,Chongqing,400020,China - 4 -

1. - SUMMARIZE

The MCM1000 Series provides a compact and robust metering solution, enable reliable

monitoring of building electrical loads with a low installation cost-per-point by combining

sub-metering. The unit performs real-time metering, measures energy consumption for max 18

channel circuits for single phase or 6 channel for three phase circuits.

Advanced communications options including Modbus via RS485, I/O communications provide for

extensive reliable data exchange. Multiple units can be connected together to meter unlimited

number of circuits. The versatility of MCM1000 meters are ideal for multi-tenant or departmental

metering applications within office towers, condominiums, apartment buildings, shopping centers

and other multi-user environments.

Measurement Function

Voltage: Line Voltage; Phase Voltage

Current: Total Current; Current per channel

Power and Power Factor: Total power Reactive Power, Apparent Power, Power Factor and for

per channel

Frequency: System Frequency

Energy Function

Energy (kWh) measurement meeting international standards, accuracy is Class 1.0.

Over/Under Limit Alarming

Users can select parameters and set their set points. An alarm will be triggered when the setpoint

is reached. At the same time, sound and light signals could be sent out via relay output. The time

and reason of an alarm event will be recorded.

I/O Option

Standard output ports provide energy (kWh) pulse output and time pulse output; optional 6

channel digital inputs (DI) provide pulse counting from water, electricity and gas meter, and

monitor switch status; optional 2 channel relay outputs (DO) react upon alarming conditions.

Communication and Network

Supports RS485 communication open protocol: Modbus RTU;

User Manual

Tel: +0086-023-67628702 Email:tech@cqbluejay.com

www.cqbluejay.com

Add: 1802,Building 2,No.88,Jianxin East Road,Chongqing,400020,China - 5 -

2. - ELECTRICITY METERING

MCM1000 series has two models:

MCM13xx - three phase measurement, max connect 6 channel three phase circuit

MCM11xx -single phase measurement, max connect 18 channel single phase circuit.

The MCM delivers the of parameters listed by RS485 ports, Blue Jay Technology also provide

advanced model can connect display unit show visualization information, and do configuration of

the MCM device. In the main display area shows 4 power parameters, with other display area

show the various parameters and state of meter on each page jump. For more details of

measurement parameters please refer to the subsequent for displays introduction.

Metering parameter overall

Function

Parameter

MCM1310

MCM1320

Real-time Parameter

Voltage

Va, Vb, Vc / Vab, Vbc, Vca

●

Current

per channel / per phase

●

Power

per channel / per phase

●

Reactive Power

per channel / per phase

●

Apparent Power

per channel / per phase

●

Power Factor

per channel / per phase

●

Frequency

per channel

●

Energy

Active Energy +

per channel

●

Reactive Energy +

per channel

●

Active Energy -

per channel

●

Reactive Energy -

per channel

●

Communication

RS485

Modbus-RTU

●

Alarming

Over/Under Limit Alarm

○

●

I/O

6DI & 2DO

○

●

Display

External LCD display

(RS485 connection)

●

Notes: "●" for Standard; "○" for Optional; Blank means Not Available

User Manual

Tel: +0086-023-67628702 Email:tech@cqbluejay.com

www.cqbluejay.com

Add: 1802,Building 2,No.88,Jianxin East Road,Chongqing,400020,China - 6 -

3. - SPECIFICATIONS

Reference standard:

Basic electricity: IEC 61557-12:2007

Active energy: IEC 62053-21:2003

Reactive energy: IEC 62053-23:2003

Accuracy standards

Parameter

Accuracy

A phase

B phase

C phase

All

Voltage

Current

Active Power

Reactive Power

Apparent power

Power Factor

Active Energy

Reactive Energy

Frequency

0.2

0.5

0.1

var1

VA1

PF1

var2

VA2

PF2

var3

VA3

PF3

var

varh

Input

Voltage: Rated 40~400V

Current: Rated 5A (optional 1A)

Frequency: 45-65Hz

Overload

Current: 1.2 times rated continuous; 5 seconds for 10 times the rated

Voltage: 30 seconds for 2 times the rated

Dielectric strength

IEC/EN 61010-1:2010

2kV AC RMS 1 minute, between input / output / case / power supply

EMC Test

standard

Test voltage

Electrostatic discharge immunity

test:

IEC-61000-4-2

level 4

8Kv

Electrical fast transient burst

immunity test

IEC61000-4-4

level 3

Input 1kV; Power supply 2kV

Surge (Shock) immunity test

IEC61000-4-5

level 4

common mode test voltage 4kV

User Manual

Tel: +0086-023-67628702 Email:tech@cqbluejay.com

www.cqbluejay.com

Add: 1802,Building 2,No.88,Jianxin East Road,Chongqing,400020,China - 7 -

Work environment

Temperature: -15C~ +55C

Humidity: RH 20%~95% (No condensation)

Storage Conditions

Temperature: -25C~+70C

Humidity: RH 20%~95%

Working Power

AC 80-265V, 45-65Hz, DC 100-350V

DC 20-60V (Optional)

Maximum power consumption 6W

Dimensions

L ×H × D =180mm×122mm×48mm

Installation

35mm Din-Rail

User Manual

Tel: +0086-023-67628702 Email:tech@cqbluejay.com

www.cqbluejay.com

Add: 1802,Building 2,No.88,Jianxin East Road,Chongqing,400020,China - 8 -

4.- INSTALLATION AND START-UP

The manual you hold in your hand contains information and warnings that the user

should respect in order to guarantee a proper operation of all the instrument functions

and keep it in safety conditions. The instrument must not be powered on and used

until its definitive assembly is on the cabinet’s door.

If the instrument is not used as manufacturer’s specifications, the protection of the

instrument will be damaged.

When any protection failure is suspected to exist (for example, it presents external visible

damages), the instrument must be immediately powered off. In this case contact a qualified

service representative.

4.1.- Installation

Mounting

This meter is DIN rail mounted, which fits 35 mm standard rails. Keep all connections into the

cabinet. Note that with the instrument powered on, the terminals could be dangerous to touch and

cover opening actions or elements removal may allow accessing dangerous parts. Therefore, the

instrument must not be used until this is completely

installed.

User Manual

Tel: +0086-023-67628702 Email:tech@cqbluejay.com

www.cqbluejay.com

Add: 1802,Building 2,No.88,Jianxin East Road,Chongqing,400020,China - 9 -

35mm Din Rail

MCM1000

Notes:

Input signal: MCM1000 using a separate acquisition calculate for each measurement channel, to

ensure consistent in use, for different load forms, it's a variety of connection mode. Access wire

shall be met: the current 2.5 square mm, voltage of 1.5 square millimeters.

A. Voltage input:

Input voltage should not exceed the rated input voltage products (100V or 400V),

Otherwise, you should use external CT. Suggest 1Afuse be installed in the voltage input side.

B. Current Input:

Standard input current is 5A, if greater than 5Ashould use external CT.

When the CT is connected with other instruments, make sure wiring methods be used in series.

Before remove the current input connection, must be sure to disconnect the primary circuit or

shorted secondary circuit of CT. In order to facilitate disassembly, please do not connect to CT

directly, and the terminal block is suggested.

C. Please make sure that the input voltage and current corresponding to the same phase

sequence, and the same direction; Otherwise, the Values and symbols will be wrong!!

(Power and Energy)

The input network configuration of instrument depends on the CT number of the system:

User Manual

Tel: +0086-023-67628702 Email:tech@cqbluejay.com

www.cqbluejay.com

Add: 1802,Building 2,No.88,Jianxin East Road,Chongqing,400020,China - 10 -

in the condition of 2 CT, select the three-phase, three-lines two components;

in the condition of 3 CT, select the three-phase, four-lines three component mode.

Instrument connection mode, set of the instrument (programming input network NET) should be

the same load wiring as measured wiring. Otherwise, the measurement instrument will lead to

incorrect voltage or power.

In three-phase three-wire mode, the measurement and shows the line voltage;

In three-phase four-wire mode, the measurement and shows the phase voltage.

Auxiliary power:

MCM1000 Series with universal (AC / DC) power input, if not for a special statement, we provide

the 220VAC or 110V/DC power interface for standard products. Instruments limit work power

supply:AC: 85-265V / DC: 100~300V, please ensure that the auxiliary power can match with

MCM1000 series meter to prevent damage to the product.

A. Suggest install 1A fuse in the fire line side.

B. For the areas with poor power quality, suggest install lightning surge suppressor and rapid burst

suppressor to prevent lightning strikes.

Tabla de contenidos

Otros manuales de Instrumento de medición de BLUE JAY

BLUE JAY

BLUE JAY BJ192I Manual de usuario

BLUE JAY

BLUE JAY BJ195PUI Manual de usuario

BLUE JAY

BLUE JAY BJ-MCM1100 Manual de usuario

BLUE JAY

BLUE JAY BJ-194Z Manual de usuario

BLUE JAY

BLUE JAY BJ-194Y Manual de usuario

BLUE JAY

BLUE JAY BJ194L-ASY Manual de usuario

BLUE JAY

BLUE JAY BJ193PQH Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario