Blaupunkt BPE1008BT Manual de usuario
LOCATION OF CONTROLS
1
TREBLE BASS MIC GUITAR ECHO VOLUME
MAXMIN MAXMIN MAXMIN MAXMIN MAXMIN MAXMIN
TREBLE BASS
STANDBY
MIC GUITAR ECHO VOLUME
MAXMIN MAXMIN MAXMIN MAXMIN MAXMIN MAXMIN
12 13 14
11
10
9
87
15
16
1 2 3 4 5 6
POWER
STANDBY
OPERATING INSTRUCTIONS
1. TREBLE LEVEL CONTROL
2. BASS LEVEL CONTROL
3. MICROPHONE INPUT LEVEL
CONTROL
4. GUITAR INPUT LEVEL CONTROL
5. ECHO LEVEL CONTROL
6. VOLUME LEVEL CONTROL
7. POWER ON/OFF SWITCH
8. STANDBY BUTTON
9. DC IN JACK
10. AUX IN JACK
11. POWER INDICATOR
12. BATTERY INDICATOR
13. MICROPHONE INPUT JACK
14. GUITAR INPUT JACK
15. NFC AREA
16. BATTERY COMPARTMENT
CHARGING THE BATTERY
Before using the speaker, you must charge the battery. When the battery level of the
speaker is low, the BATTERY INDICATOR starts blinking. When the battery is charging,
the BATTERY INDICATOR is illuminated. After the battery has fully charged, the light
switches off. When the battery is fully charged, first disconnect the AC adaptor from the
speaker, then from the wall outlet.
Note: When the AC adaptor is disconnected it is normal for the sound to be reduced. This
occurs naturally to save battery power. Adjust sound to you liking.
USING THE POWER SOURCE
1. Connect the AC adaptor to the DC IN JACK of the speaker firmly, and plug it into a
wall outlet.
2. Slide the POWER ON/OFF switch to “ON” positon, the speaker is in standby mode.
3. You can now press the STANDBY button to turn on the speaker.
4. Slide the POWER ON/OFF switch to “OFF” positon, and pull the AC adaptor out of
the wall outlet if you want to switch off completely.
ACTIVATING THE BLUETOOTH FUNCTION
When you turn “on” the speaker using the STANDBY, it will enter into the Bluetooth
mode automatically. The POWER INDICATOR turns blue and starts blinking. The
speaker is now in pairing mode
PAIR THE SPEAKER USING NFC
1. With Near Field Communication (NFC), you can easily pair and connect the speaker
to Android device with NFC.
2. If the Android device supports NFC, activate its NFC feature, and touch the NFC
area of the speaker with the NFC area of your Android device. The speaker pairs
and connects to the Android device automatically. For details on NFC, refer to the
user guide of the Android device.
2
OPERATING INSTRUCTIONS
PAIR THE SPEAKER USING BLUETOOTH
1. Verify that the Bluetooth function on Bluetooth device is enabled.
2. Choose the Bluetooth menu in your Bluetooth device, and from the found devices,
select “Earthquake”. If you are prompted to enter the PIN code, enter "0000" (four
zeros).
3. For more information, refer to the user manual of Bluetooth device.
4. After a successful pairing, you may play the music from the Bluetooth device.
Note:
1. Only one Bluetooth device can be connected to the speaker at a time. If the speaker
is already connected to another Bluetooth device, the speaker will not appear in the
Bluetooth menu of your Bluetooth device.
2. When you turn off/on the speaker or the Bluetooth device, the speaker will connect
to the Bluetooth device automatically within 60 seconds. Otherwise, you need to
connect it manually on the Bluetooth menu in your Bluetooth device.
3. Depending on the device you have, some Bluetooth devices may need to perform
the pairing again.
AUXIN FUNCTION
1. Connect an audio cable (not included) to the AUX IN JACK of the speaker and to
the audio output socket on the external audio devices such as MP3 player, discman,
etc. The POWER INDICATOR turns red.
2. Play from an external audio device.
Note: When the external audio device is connected to the AUX IN JACK, Bluetooth
function is automatically disabled.
CONNECTING A MICROPHONE/GUITAR
When using a microphone or a guitar, you can mix this sound with a source sound from
an external device.
1. Turn the MIC/GUITAR LEVEL CONTROL fully counterwise tothe lowest level.
CAUTION
DO NOT connect a bass guitar to the MIC/GUITAR INPUTJACK, as it may damage the
speaker and void warranty.
2. Connect a microphone or a guitar to the MIC/GUITAR INPUT JACK of the speaker.
3. Start playback of the source.
4. Turn the MIC/GUITAR LEVEL CONTROL to adjust to the desired volume.
3
OPERATING INSTRUCTIONS
TO ADJUST THE VOLUME
Turn the VOLUME LEVEL CONTROL to adjust the volume of the speaker. Turning
clockwise will increase the sound to a desired level.
CONTROL THE TREBLE/BASS
Turn the TREBLE/BASS LEVEL CONTROL to adjust the treble/bass effect. Turning
clockwise will increase the sound to a desired level.
CONTROL THE ECHO
Turn the ECHO LEVEL CONTROL to adjust the echo effect. Turning clockwise will
increase the sound to a desired level.
•Audio Output: 40 WRMS(L) + 40 WRMS(R)
•Connectivity
o3.5mm Aux In Jack
oDC IN Jack
•Power Requirement
oAC 100-240V, 50/60Hz
oRechargeable Battery
•Unit Dimensions: 620(W) x 250(D) x 250(H) mm
SPECIFICATIONS
4
Tabla de contenidos
Otros manuales de Oradores de Blaupunkt
Blaupunkt
Blaupunkt BT07LED Manual de usuario
Blaupunkt
Blaupunkt Rock & Roll PS75 Manual de usuario
Blaupunkt
Blaupunkt BT04 Manual de usuario
Blaupunkt
Blaupunkt BLP3940 Manual de usuario
Blaupunkt
Blaupunkt PB06DB Manual de usuario
Blaupunkt
Blaupunkt PS11DB Manual de usuario
Blaupunkt
Blaupunkt blue magic cx 160 Manual de usuario
Blaupunkt
Blaupunkt Voss Manual de usuario
Blaupunkt
Blaupunkt BLP3200 Manual de usuario
Blaupunkt
Blaupunkt PCb 1200 Double Manual de usuario
Blaupunkt
Blaupunkt BLP3360 Manual de usuario
Blaupunkt
Blaupunkt BLP3800-002 Manual de usuario
Blaupunkt
Blaupunkt BT5BK Manual de usuario
Blaupunkt
Blaupunkt BT12OUTDOOR Manual de usuario
Blaupunkt
Blaupunkt BPT6021BT Manual de usuario
Blaupunkt
Blaupunkt BLP3690-001 Manual de usuario
Blaupunkt
Blaupunkt BT08LED Manual de usuario
Blaupunkt
Blaupunkt BP1838 Manual de usuario
Blaupunkt
Blaupunkt IC Series Manual de usuario
Blaupunkt
Blaupunkt BLP3920 Manual de usuario
