Blastrac BDC 1216 Manual de usuario
Operating Manual
BDC 1216
MAN-BDC-1216-EN
Technical data
Safety instructions
General
Transport
Initial operation
Operation
Maintenance
Electri
cal systems
Fault diagnosis
Spare parts
Design and specifications are subject t
o
change without notice - September 2007
BDC 1216 Operating Manual
Technical Data
Contents Chapter 1
1.1 Rating
1.2 Unit specications
1.3 Operative range and correct usage
1.4 Stand-by power supply
1.5 Machine type designation
1
Operating Manual BDC 1216
Technical Data
1.1 Rating
Unit / designation: Blastrac Dust collector
Machine type: BDC 1216
Manufacturer: Blastrac BV
nevahthcertU 12
NP3343-LN Nieuwegein
EHT NETHERLANDS
1.2 Unit specications
Technical data
Dust collector BDC 1216
Power consumption Motor
power (with 2 turbines) 1600 W
Input current
Motor power (with 2 turbines) max. 10 A
Connected loads 230 V, 50Hz, 16A fuse
Dust hose connection 50 mm Ø
Dust hose length 10 m
Filter surface 1,50 m²
Dedusting interval Manual
Airow 312m³/h
Connected loads (electrical system):
The indicated input current values correspond to the nominal current
values of the motors working under full load. These values are not
achieved under normal operating conditions.
2
BDC 1216 Operating Manual
Technical Data
Dimensions:
Dust collector BDC 1216
Length 570 mm
Width 640 mm
Height 1000 mm
Weight 34 kg
1.3 Operative range and correct usage
The dust collector BDC 1216 is exclusively designed
to be used with Blastrac m achines. It is only allowed
to vacuum dry dust. The manufacturer will not be
liable for damage resulting from such incorrect
usage. In these cases theuser assumes all risks .
3
Operating Manual BDC 1216
Technical Data
1.4 Stand-by pow er supply (Generator)
If the dust collector BDC 1216 is operated using a
generator, this generator must be operated in
accordance with the curre nt VDE directives (this
applies to the protective earth conductor in
particular) in order to ensure that all safety devices
are functioning and to eliminate possible damage to
electrical components.
1.5 Machine ty pe designation
Blastrac DustCollecto
r
(1) single phas e
(2)motors
(16) 1. 6kW
B DC 1216
4
BDC 1216 Operating Manual
Safetyadvice
Contents Chapter 2
2.1 Warnings and symbols
2.2 Organisational measures
2.3 Personnel selection and qualication
2.4 Safety precautions applicable to normal operation
2.5 Special work within the scope of use of the dust collector and
maintenance activities as well as repairs during operation
2.6 Safety o position
2.7 Particular dangerous aspects of the equipment
2.8 Safety regulations Electric
1
Operating Manual BDC 1216
Safetyadvice
2.1 Warnings and sy mbols
The following denominations and symbol s are used in the Operating
Instructions to highlight areas of particular importance:
Sy mbol of operational safety .
In these Operating Instructions this sy mbol will be
shown next to all safety precautions that are to be
taken in order to ensure prevention to life and injury .
Follow these instructions and take special care in
these circumstances. In addition to these
instructions, the general safety precautions and
accident prevention guidelines are also to be
followed.
Particular details regarding the economical use of
the dust collector.
Information, instructions and restrictions with regard
to possible risks to persons or to extensive material
damages.
2
Otros manuales para BDC 1216
1
Tabla de contenidos
Otros manuales de Aspiradora de Blastrac
Blastrac
Blastrac BDC-122 Manual de usuario
Blastrac
Blastrac BDC3140 Manual de usuario
Blastrac
Blastrac BDC-1324 Manual de usuario
Blastrac
Blastrac BDC-3155HCA Manual de usuario
Blastrac
Blastrac BDC-22-110V Manual de usuario
Blastrac
Blastrac BDC-654 Manual de usuario
Blastrac
Blastrac BDC-23-230V-P Manual de usuario
Blastrac
Blastrac BDC 3140 P Manual de usuario
Blastrac
Blastrac BDC-24-230V-P Manual de usuario
Blastrac
Blastrac BDC-133M Manual de usuario
