Blackstar Amplification ID:CORE STEREO 100 Manual de usuario

Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK

For the latest information go to: www.blackstaramps.com

Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement

and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.

Designed and Engineered by

Blackstar Amplification UK

120402M-1 02/16

Owner’s Manual

ID:CORE STEREO 100 & ID:CORE STEREO 150

USA / Canada

IMPORTANT SAFETY INSTRUCTIONS

1. Readtheseinstructions.

2. Keeptheseinstructions.

3. Heedallwarnings.

4. Followallinstructions.

5. Donotusethisapparatusnearwater.

6. Cleanonlywithdrycloth.

7. Donotblockanyventilationopenings.

8. Installinaccordancewiththemanufacturer’sinstructions.

9. Donotinstallnearanyheatsourcessuchasradiators,heatregisters,stoves,or

otherapparatus(includingampliers)thatproduceheat.

10.Donotdefeatthesafetypurposeofthepolarizedorgrounding-typeplug.A

polarizedplughastwobladeswithonewiderthantheother.Agroundingtype

plughastwobladesandathirdgroundingprong.Thewidebladeorthethird

prongareprovidedforyoursafety.Iftheprovidedplugdoesnottintoyour

outlet,consultanelectricianforreplacementoftheobsoleteoutlet.

11.Protectthepowercordfrombeingwalkedonorpinchedparticularlyatplugs,

conveniencereceptacles,andthepointwheretheyexitfromtheapparatus.

12.Onlyuseattachments/accessoriesspeciedbythemanufacturer.

13.Unplugthisapparatusduringlightningstormsorwhenunusedforlongperiods

oftime.

14.Referallservicingtoqualiedservicepersonnel.Servicingisrequiredwhenthe

apparatushasbeendamagedinanyway,suchaspower-supplycordorplugis

damaged,liquidhasbeenspilledorobjectshavefallenintotheapparatus,the

apparatushasbeenexposedtorainormoisture,doesnotoperatenormally,or

hasbeendropped.

“TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS,

DISCONNECT THE POWER-SUPPLY CORD PLUG FROM THE AC RECEPTACLE.”

“WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. THE APPARATUS SHALL

NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT OBJECTS FILLED

WITH LIQUIDS, SUCH AS VASES, SHALL NOT BE PLACED ON APPARATUS.”

This symbol is intended to alert the user to the presence of

uninsulated“dangerousvoltage”withintheproduct’senclosurethat

maybeofsufcientmagnitudetoconstituteariskofelectricshock

topersons.

Thissymbolisintendedtoalerttheusertothepresenceofimportant

operationandmaintenance(servicing)instructionsintheliterature

accompanyingtheappliance.

English

TheU.S.Government'sOccupationalSafetyandHealthAdministration(OSHA)has

speciedthefollowingpermissiblenoiselevelexposures:

DurationPerDayInHours SoundLeveldBA,SlowResponse

8  90

6  92

4  95

3  97

2  100

1½  102

1  105

½  110

¼orless 115

AccordingtoOSHA,anyexposureinexcessoftheabovepermissiblelimitscould

resultinsomehearingloss.

Earplugprotectorsintheearcanalsorovertheearsmustbewornwhenoperating

thisamplicationsysteminordertopreventapermanenthearinglossifexposureis

inexcessofthelimitsassetforthabove.Toensureagainstpotentiallydangerous

exposure to high sound pressure levels, it is recommended that all persons

exposedtoequipmentcapableofproducinghighsoundpressurelevelssuchas

thisamplicationsystembeprotectedbyhearingprotectorswhilethisunitisin

operation.

Warning!

Important safety information!

READ THE FOLLOWING INFORMATION CAREFULLY. SAVE ALL

INSTRUCTIONS FOR FUTURE REFERENCE!

Follow all warnings and instructions marked on the product!

Danger! High internal operating voltages.

Do not open the equipment case. There are no user serviceable parts in this

equipment.Referallservicingtoqualiedservicepersonnel.

Cleanonlywithadrycloth.

Condensation can form on the inside of an amplier if it is moved from a cold

environmenttoawarmerlocation.Beforeswitchingtheuniton,itisrecommended

thattheunitbeallowedtoreachroomtemperature.

Unauthorised modication of this equipment is expressly forbidden by Blackstar

AmplicationLtd.

Neverpushobjectsofanykindintoventilationslotsontheequipmentcasing.

Donotexposethisapparatustorain,liquidsormoistureofanytype.

Avoidplacingvesselslledwithliquidontopoftheamplier.

Donotplacethisproductonanunstabletrolley,standortable.Theproductmay

fall,causingseriousdamagetotheproductortopersons!

Donotcoverorblockventilationslotsoropenings.

Thisproductshouldnotbeplacednearasourceofheatsuchasastove,radiator,

oranotherheatproducingamplier.

Use only the supplied power cord which is compatible with the mains voltage

supplyinyourarea.

Powersupplycordsshouldalwaysbehandledcarefullyandshouldbereplacedif

damagedinanyway.

Neverbreakofftheearth(ground)pinonthepowersupplycord.

Thepowersupplycordshouldbeunpluggedwhentheunitistobeunusedforlong

periodsoftime.

Beforetheunitisswitchedon,theloudspeakershouldbeconnectedasdescribed

inthehandbookusingtheleadrecommendedbythemanufacturer.

Alwaysreplacedamagedfuseswiththecorrectratingandtype.

Neverdisconnecttheprotectivemainsearthconnection.

High loudspeaker levels can cause permanent hearing damage. You should

therefore avoid the direct vicinity of loudspeakers operating at high levels. Wear

hearingprotectionifcontinuouslyexposedtohighlevels.

If the product does not operate normally when the operating instructions are

followed,thenrefertheproducttoaqualiedserviceengineer.

Allelectricalandelectronicproductsshouldbedisposedofseparately

fromthemunicipalwastestreamviadesignatedcollectionfacilities

appointedbythegovernmentorthelocalauthorities.

Features

Since2007,Blackstarhasledthewayintheinnovationofguitaramplification.

ID:CorerepresentstheculminationofyearsoftechnicalResearchandDevelopment.

Theseampshaveanintuitivecontrolsetlikeatraditionalamp,buthavetheversatility

ofprogrammability.Designedtobecompactandlightweightwithhighpower,the

uniquecontrolsallowyou,theguitarist,tocustomdesignyourownsound.

TheVoicecontrolhassixdifferentsettings–CleanWarm,CleanBright,Crunch,

SuperCrunch,OD1,andOD2,allofwhichhavebeenenhancedfromtheoriginal

ID:Corevoicesforanarticulatelivesound.WhenusedtogetherwithBlackstar’s

patentedISFcontrolyoucangettheexacttoneyou’rethinkingof.

TheeffectssectiondeliversstudioqualitySuperWideStereomodulation,delayand

reverbeffectssimultaneouslythatyoucanstorewithyoursound.

DeepeditingandstoringofpatchesissimpleusingtheBlackstarINSIDERsoftware.

Patchescanbeshared,uploadedanddownloadedviatheonlinecommunity.The

USBconnectoralsoallowsyoutorecordfromyourampdirectlytoyourcomputer.

Thenewbuilt-inlooperprovidesbothliveperformanceandpersonalhomepractice

optionsforplayersofallskilllevels.Whetherplayingliveasasoloartistorasthe

loneguitaristinapowerduo(ortrio),thesimpleandintuitivelooperhelpsyouto

achieveastage-filling,multipletracksoundatthepressofafootswitch(included),

withunlimitedoverdubs.

Anemulatedoutput,MP3/lineinputandeffectsloopcompletethepackage.

ByusingtheuniqueVoicecontrolandthepatentedISF,ID:Coreamplifiersallow

unparalleledflexibilityandeaseofuse,enablingyoutodesignthesoundinyour

headanddeliveritathome,inthestudioandlive.

English

Introduction

ThankyouforpurchasingthisBlackstarID:Coreamplifier.Likeallourproducts,this

ampistheresultofcountlesshoursofpainstakingResearchandDevelopmentby

ourworld-classdesignteam.BasedinNorthampton(UK),theBlackstarteamare

allexperiencedmusiciansthemselvesandthesoleaimofthedevelopmentprocess

istoprovideguitaristswithproductswhicharetheultimatetoolsforself-expression.

AllBlackstarproductsaresubjectedtoextensivelaboratoryandroadtestingto

ensurethattheyaretrulyuncompromisingintermsofreliability,qualityandabove

allTONE.

ID:Core represents a truly ground-breaking achievement, combining unique

innovations,anintuitive,traditionalcontrolsetandtheversatilityofprogrammability.

Pleasereadthroughthishandbookcarefullytoensureyougetthemaximumbenefit

fromyournewBlackstarproduct.

IfyoulikewhatyouhearandwanttofindoutmoreabouttheBlackstarrangeof

productspleasevisitourwebsiteatwww.blackstaramps.com.

Thanks!

TheBlackstarTeam

English

Factory Reset

Thedefaultfactorypatchesandsettingscanberestoredtoyouramplieratany

time.SimplyholddowntheMOD,DLYandREVswitchessimultaneously,whilst

switchingontheamplier.

TheVoiceLEDswillcountdowntoindicatethatafactoryresetisimminent.Ifanyof

theMOD,DLYandREVswitchesarereleasedbeforetheVoiceLEDshaveswitched

off,thentheoperationiscancelledandtheamplierwillremainunaffected.

Finally,switchtheamplierpowerofftocompletetheprocess.Whenpoweredon,

youramplierwillberestoredtothefactorydefaultsettings.

IMPORTANT NOTE:

Thisprocesswilloverwriteanyusersavedpatchesandsettings.

English

Front Panel

1. Input

Plugyourguitarinhere.

Alwaysuseagoodqualityscreenedguitarlead.

2. Voice

TheenhancedVoicecontrolchangesthepreampvoicing,rangingfromultraclean

toextremelyoverdriven.

CleanWarm–Classicclean,dynamic

CleanBright–‘Boutique’,willbreakupwhenpushedhard

Crunch–Classicmediumgainoverdrive

SuperCrunch–MoregainandpunchthanCrunch

OD1–Hot-roddedMasterVolumeoverdrive

OD2–Midboostedoverdrive

Thissettingissavedwhenyoustoreapatch.

3. Gain

TheGaincontroladjuststheamountofoverdriveordistortion.Lowsettings(counter

clockwise)willdeliveracleansoundontheedgeofbreak-up.AstheGaincontrolis

turnedclockwisethesoundwillbecomemoreoverdriven,movingthroughbeautiful

crunchtonesuntil,atitsmaximumposition,afulldistortedtoneisachieved.This

settingissavedwhenyoustoreapatch.

4. Volume

Thiscontrolsthepreampvolume.Highlevelsofvolumewillintroducetheeffectof

valvepowerampdistortionandcompression.Thissettingissavedwhenyoustore

apatch.

5. Bass

Thebasscontroladjuststheamountoflow-endfrequenciesinyourtone.Thisamp

hasanadvancedtoneshapingcircuitwhichallowsthetonetobetightandcutting

(counterclockwise)towarmandthumping(clockwise).Thissettingissavedwhen

youstoreapatch.

6. Middle

Themiddlecontroladjuststheamountofmiddlefrequenciesinyourtone.The

middle frequencies are particularly important in setting the amount of ‘body’

yourtonehas.Withthemiddlecontrolsettoitsminimumposition(fullycounter

clockwise)thesoundwillbeaggressiveandscooped,atoneidealforaggressive

rhythmplaying.Asthemiddlecontrolisincreased(clockwise)theamountof‘body’

isincreased,whichismoresuitableforsustainedleadguitartones.Thissettingis

savedwhenyoustoreapatch.

7. Treble

Thetreblecontrolallowsexactadjustmentofthetreblefrequencieswithinthesound.

Atlowsettings(counterclockwise)thesoundwillbewarmanddarkincharacter.

Asthetreblecontrolisincreased(clockwise)thesoundwillbecomebrighter.Atthe

maximumsettingsthesoundwillbeaggressiveandcutting.Thissettingissaved

whenyoustoreapatch.

8. ISF

ThepatentedISFcontrolallowsyoutochoosetheexact

tonalsignatureyouprefer.Fullycounterclockwisehas

amore American characteristic with a tightbottom-

endandmoreaggressivemiddle,andfullyclockwise

hasaBritishcharacteristicwhichismore‘woody’and

lessaggressive.Thisleadstoaveryfamiliar,musical

response.Thissettingissavedwhenyoustoreapatch.

9. MOD (Modulation)

Pressthisswitchtoturnthestereomodulationeffecton,off,orfocustheeffectfor

editing.Thissettingissavedwhenyoustoreapatch.

10. DLY (Delay)

Pressthisswitchtoturnthestereodelayeffecton,off,orfocustheeffectforediting.

Thissettingissavedwhenyoustoreapatch.

11. REV (Reverb)

Pressthisswitchtoturnthestereoreverbeffecton,off,orfocustheeffectfor

editing.Thissettingissavedwhenyoustoreapatch.

Forallthreeeffectswitches/buttons,theLEDshowswhatstatetheeffectisin:

LED Effect State Description

LEDnoton Effectoff Effectnotactive

LEDred Effectonbutnot‘focused’forediting Effect is active, but not affected by the front

paneleffectcontrols

LEDgreen Effectonand‘focused’forediting Effect active and affected by the front panel

effectcontrols

Repeatedlypressingeacheffectswitchesonthefrontpanelhasthefollowingeffect:

Current Effect State Next Effect State

Effectoff Turnstheeffectonand‘focuses’theeffect.Anypreviouslyfocusedeffect

revertstoan‘on’state

Effectonbutnot‘focused’ Focusestheeffect.Anypreviouslyfocusedeffectrevertstoan‘on’state

Effectonand‘focused’ Turnstheeffectoff.Ifanyothereffect(s)areon,thepreviously‘focused’effect

resumesbeing‘focused’

NOTE:Onlyoneeffectmaybe‘focused’atanytime.

English

12. Effect Type

Thischangestheeffecttypeandeditsaparameterofthecurrently‘focused’effect

(modulation,delay,orreverb).

Each segment represents a different effect (four for each type of effect). An

LEDshowswhicheffecttypeiscurrentlyactive.Thedistancetravelledthrough

the‘segment’modifiesaneffectparameter.TheEffectsTablebelowshowsthe

modifiableparameters.

Thissettingissavedwhenyoustoreapatch.

13. Effect Level

Thismodifiesaneffectparameter.Formodulationanddelayeffects,turningthe

LevelcontrolwhileholdingdowntheTapbutton(14)modifiestherate/timeofthe

effect.

TheEffectsTablebelowshowsthemodifiableparameters.

Thissettingissavedwhenyoustoreapatch.

14. Tap

TheTapswitchisusedtosettherate/timeofthecurrent‘focused’effect.Thetime

betweeneachpressofthetapbuttondefinestherateset.

Onceset,theTapLEDwillflashintimewiththesetrateofthecurrently‘focused’

effect.

TheEffectsTablebelowshowsthemodifiableparameters:

Effects Table

Effect Segment Parameter Level Parameter Tap Parameter

MODULATION

Phaser Mix Depth Speed

Chorus/Flanger Morph Mix Speed

Octaver Octavedown/upblend Octaver/originalguitarmix -

Tremolo Frequencymodulationdepth Amplitudemodulationdepth Speed

DELAY

Linear Feedback Delaylevel Time

Analogue Feedback Delaylevel Time

Tape Feedback Delaylevel Time

Multi Feedback Delaylevel Time

REVERB

Room Size Reverblevel -

Hall Size Reverblevel -

Spring Size Reverblevel -

Plate Size Reverblevel -

Thissettingissavedwhenyoustoreapatch.

15. Master Volume

Thiscontrolstheoverallvolumeofyouramplifier.Turningitclockwiseincreasesthe

volume.Thisisaglobalsettingandisnotsavedwhenstoringapatch.Ifthemaster

volumeisatzerothisallowsforsilentrecordingviatheEmulated/HeadphoneOutput

orUSB.Theemulatedleveliscontrolledviathepreampvolume.

16. USB

Plug a USB cable in here to connect the amplifier to a Windows PC or Mac.

Blackstar’sINSIDERsoftwareoffersahostoffeaturesandcanbedownloaded

from:www.blackstarinsider.co.uk

SeetheUSBAudiosectiononpage15formoreinformation.

NOTE:Theamplifierwillappearonapersonalcomputerasanaudiocapturedevice

withinrecordingsoftware.

17. Manual

PressthisswitchtotogglebetweenManualModeandthecurrentpatch.Whenthe

amplifierisinManualMode,thesoundwillreflectthecurrentphysicalpositionofthe

knobs.ThisisapplicabletotheVoice,Gain,Volume,Bass,Middle,TrebleandISF

controls.AnyeffectsthatareactivewhenswitchingtoManualModewillbeturned

off.WhileinManualModeanyofthecontrolscanstillbemodifiedbyanexternal

source(BlackstarINSIDERsoftware,footcontroller),butthismeansthatthesound

willnotrepresentthepositionsofthecontrolsonthefrontpanel.

WhileinManualModeanyofthecontrolscanstillbemodifiedbytheBlackstar

INSIDERsoftwarebutthismeansthatthesoundwillnotrepresentthepositionsof

theknobsonthefrontpanel.

Tuner Mode

HoldingtheManual(17)switchfortwosecondswillengagethetuner.TheRecall

IndicatorLED(20)willflashcontinuouslytoindicatetheamplifierisinTunerMode.

TheamplifieroutputwillbemutedwhilstinTunerMode.

TheVoiceLEDswillindicatetheclosestnotetothenotebeingplayed.

TheMOD,DLYandREVLEDsactasindicatorstoshowhowclosetheplayednote

istothetunednote.

MODLEDred Noteissharp(abovepitch)

DLYLEDgreen Noteisintune

REVLEDred Noteisat(belowpitch)

AllotherLEDsonthefrontpanelwillbeoffinTunerMode.

PressinganyswitchwillexitTunerMode.

English

18. Bank

PresstheBankswitchtoscrollthroughthefirstthreebanksofpatches.

Bank1->Bank2

Bank2->Bank3

Bank3->Bank1

ThegreenLEDindicatesyou’reinBank1,theorangeLEDindicatesyou’reinBank

2andtheredLEDindicatesyou’reinBank3.

NOTE:Thefirstthreebankscanbeselectedfromthefrontpanel.Whenyouactivate

Bank4andhigherfromanexternalcontroller(e.g.BlackstarINSIDERsoftware,

footcontroller),theBankLEDwillnotbelitbutthechannelLEDswillcontinueto

showyouthepatchlocation.Forexample:

Patch9–BankLEDred,Channel3LEDlit.

PressingBankUPfromanexternalcontrollerwillswitchyoutoPatch12–Bank

LEDoff,Channel3lit.

Thechannelwillberemembered,thereforethe corresponding patchwithinthe

currentbankwillbeloadedwhenscrollingthroughthebanks.

WhentheamplifierisinManualMode,theBankLEDwillnotbelit.

19. Channels 1-3

Channel1activatesthefirstpatchwithinthecurrentlyactivebank.

Channel2activatesthesecondpatchwithinthecurrentlyactivebank.

Channel3activatesthethirdpatchwithinthecurrentlyactivebank.

20. Recall Indicator

TheRecallIndicatorshowsifthereisamismatchbetweenthecurrentvalueofa

parameterwithintheamplifierandthecorrespondingphysicalfrontpanelcontrol.

Forexample,whenyouchangetoadifferentpatchthecontrolsonthefrontpanel

maynotalwaysreflectthesettingyouarehearing.

Topreventunexpectedleveljumpsinthecontrolyouareadjusting,thefrontpanel

knobswillhavenoeffectonthesounduntiltheknobreachesthecurrentparameter

value.OncereachedtheRecallIndicatorflashestwiceandtheknob‘takescontrol’

ofthevalueandcanincreaseordecreasethevalue.

Therecallindicatorwillflasheachtimethephysical knob‘passesthrough’the

currentlyactivevaluethatyouarehearing.

RecallisactiveforGain,Volume,Bass,Middle,TrebleandISF.

WhentheTunerisactivetheRecallIndicatorwillflashcontinuously.

Whenlooping,theRecallIndicatorwillflashoncetoshowwhenthecurrentlyplaying

loophasrestarted.Whenalooporoverdubisbeingrecorded,theRecallIndicator

willflashcontinuously.

English

Rear Panel

1. Power Switch

Thisswitchisusedtoturntheamplifieronandoff.

2. Mains Input

Thesupplieddetachablemainsleadisconnectedhere.AlwaysensurethePower

SwitchisintheOFFpositionbeforeapplyingmainspower.Theleadshouldonly

beconnectedtoapoweroutletthatiscompatiblewiththevoltage,powerand

frequencyrequirementsstatedontherearpanel.Ifindoubtgetadvicefroma

qualifiedtechnician.

3. Emulated/Headphone Output

Thisoutput emulatesthe tonalcharacteristics ofa guitarspeaker cabinetand

providesanaturaltoneforconnectiontoarecordingdeviceormixingdesk.To

makefulluseofthestereoeffects,useastereojacktotwomonojackssplitterlead

tofeedtwochannelsoftherecordingdeviceormixer.Theoutputwillalsofunction

intoamonoguitartypelead.Alwaysuseagoodqualityscreenedlead.Turningthe

Volumeknob(4)willcontroltheEmulatedOutputlevel.TheMasterVolumeknob

onlyaffectstheinternalspeakers.

NOTE:To‘silently’recordorpracticeviaheadphones,settheMasterVolumeto

zero.

4. MP3/Line In

ConnecttheoutputofyourMP3orCDplayerhere.Adjusttheplayer’svolumeto

matchthatofyourguitartoenableyoutoplayalong.

5. Footswitch

ConnectyourincludedFS-13footcontrollerhere,oranyothercompatibleBlackstar

footcontroller(e.g.FS-12programmablefootcontroller).SeetheFootcontrollers

sectiononpages16-17formoreinformation.

6. Effects Loop

Inadditiontousingthestudioqualityeffectswithinyouramplifier,youcanplaceyour

ownexternaleffectsprocessorsandstompboxes‘intheloop’forthebestsonic

performance.Connecttheamplifier‘Send’totheinputofyoureffectsunit,and

connecttheoutputtothe‘Return’.Ifyoureffectsunithasastereooutput,connect

toboth‘Return’socketsonyouramplifier.Ifyourexternaleffectismonoconnect

theoutputofyoureffectsunittoonlythe‘ReturnL(Mono)’socket.

Programmability

Storing Patches

TostorethecurrentsoundasaPatch:

1.PressandholdanyofthethreeChannelswitches(19)foronesecond.Allthree

ChannelLEDswillbegintoflash.

English

2.PresstheBankswitchtoscrollthroughthethreebanks(green,orange,red)to

choosethestorelocation.

3.PressanyofthethreeChannelswitchesoncetostorethepatchinthechosen

location.

TheLEDcorrespondingtothechosenstorelocationwillilluminateandthenew

patchwillbeactive.

Greenbank=Patches1-3

Orangebank=Patches4-6

Redbank=Patches7-9

Theamplifiercontrols canbeused toeditthe patchat anystageof thestore

process.PresstheManualswitchatanystagetocancelthestoreprocessand

returntheamplifiertothelaststate.

Storingapatchwilloverwriteanypreviouspatchinthatlocation.Patchescanalso

bestoredusingBlackstar’sINSIDERsoftwarewhenconnectedtotheamplifiervia

USB.

Recalling Patches

PressanyChannelswitchtoloadthatpatch.PressingtheBankswitchwillcycle

through the three banks – green-orange-red. The Channel will be preserved,

thereforethecorrespondingpatchwithinthecurrentBankwillbeloadedwhen

scrollingthroughtheBanks.Alternatively,patchescanberecalledviaBlackstar’s

INSIDERsoftwareoranycompatiblefootcontroller.

USB Audio

StandarddevicedriversareusedtoconnecttheamplifiertoaPCorMac,therefore

noadditionaldevicedriversarerequired.Ifyourcomputer’saudiolatencyisfound

tobetoohighagenericASIOdrivercanbedownloadedandassociatedwithyour

amplifier,forexampleASIO4ALL – www.asio4all.com.Foraguideonlow-latency

USBrecordingvisit:

www.blackstaramps.com/usbrecording

NOTE: AlwaysconnecttheamplifierviaamainUSBport,oftenfoundontherear

ofthecomputer.

Theamplifierwillappearasanaudiocapturedevicewithinrecordingsoftware.

Theoutput ofthe audioover USBcan bechanged viathe BlackstarINSIDER

software,andcanbeoneofthefollowing:

Speakeremulatedstereoeffectedaudiochannels

2xmonoaudiochannels

 -Left–effectedamplifiersignal

 -Right–unprocessedguitarsignal

ReampingMode

Reamping

Theamplifiercan beswitchedinto Reamping Modeviathe BlackstarINSIDER

software.Thisisanon-storablesettingandwillbeswitchedoffeitherwhenthe

USBcableisremoved,orwhentheamplifierpowerisswitchedoff.

Whenactivated,ReampingModeallowstheamplifiertoacceptapre-recorded,dry

guitarsignalviaUSBandreturnafullyprocessedaudiosignal.Thisreturnsignalcan

thenbecapturedusingrecordingsoftwareontheconnectedPCorMac.

Footcontrollers

FS-13 2-way footcontroller (supplied)

ConnectthisfootcontrollertotheFootswitchsocketontherearofyouramplifier

usinganystandardmonoguitarcableorspeakercable(supplied).



Bydefault,yourFS-13footcontrollerwillbeinLooperMode(seetableabove)Switch

‘A’isusedtostartandfinishrecordingyourloopsandoverdubs,andswitch‘B’will

stoptheloopplayback,orcancelthecurrentoverdubifstillrecording.Asinglepress

ofbothswitches‘A’and‘B’simultaneouslywillundothelastrecordedoverdub.

Holdingswitch‘B’willerasetheloopmemory.

Byholdingdownboththe‘A’and‘B’switchesfor3secondsyoucansetyour

footcontrollerto PatchMode. Inthis mode, button‘A’ willtoggle between the

patchesinChannel1andChannel2ofthecurrentlyactiveBank.Pressingbutton

‘B’willscroll‘up’throughthefirst3Banksofpatches,operatinginthesameway

astheBANKswitchontheamplifierfrontpanel.TheoperationofPatchModecan

bechangedviatheBlackstarINSIDERsoftware,asreflectedinthetableabove.

Simplyholddownboththe‘A’and‘B’switchesagainfor3secondstochange

backtoLooperMode.

ThecurrentmodeoftheFS-13footcontrollerwillbestoredwhenyoupoweroff

theamplifier,andwillbeandrecalledeachtimeyoupoweron.Uponpowering

ontheamplifierwiththeFS-13footcontrollerconnected(orconnectingtheFS-13

footcontroller with the amplifier already powered on) the current mode of the

footcontrollerwillbeindicatedbyananimationusingtheMANUAL,BANK,CH1,

CH2andCH3LEDs.LooperModewillbeindicatedbya‘looping’countupofthese

LEDs,whereasPatchModewillbeindicatedbytheseLEDsflashingsimultaneously

twicebeforereturningtonormaloperation.

English

FS-12 5-way programmable footcontroller (not supplied)

ConnectthisfootcontrollertotheFootswitchsocketontherearofyouramplifier

usinganystandardmonoguitarcableorspeakercable.

Switches‘A’-‘C’correspondtothe‘CH1’–‘CH3’switchesonthefrontpanel

ofyouramplifier.Pressinganyofthe‘A’-‘C’footcontrollerswitcheswillrecallthe

correspondingpatchwithinthecurrentBank.Bankscanbenavigatedbyasingle

pressofbothswitches‘A’and‘B’simultaneously(Bankdown)orasinglepress

ofbothswitches‘B’and‘C’simultaneously(Bankup).All36amplifierpatches(12

banksof3)canbeaccessedusingtheFS-12footcontroller.

Switches‘D’and‘E’ontheFS-12footcontrollerareprogrammableandcanbe

configuredtoanumberofdifferentfunctionstosuityourpreference.Bydefault,

Switches‘D’and‘E’willcontroltheLooperfeatureoftheamplifier,andwillbehave

asdescribedinthefollowingtable.

To change this default setting, connect the amplifier

to your computer via USB and use the free Blackstar

INSIDERsoftwaretomakeyourpersonalselectionfrom

variousoptionssuchasModulation/Delay/ReverbOn/Off,

Modulation/DelayTap Tempo, SuperWide StereoOn/

Off,amongstothers.PleaseseetheFootcontrollersection

oftheINSIDERsoftwarefordetailoftheprogrammable

functions.

Holdingdownthe‘D’and‘E’switcheswillactivateTunerModeofyouramplifier.

WiththemultifunctionalFS-12footcontrolleryougainaccesstoafullychromatic

tunerwithnoteandcentsdisplayinformationappearingonthefootcontrollerdisplay

andLEDs.PressanyswitchtoexitTunerMode.

FS-12 + FS-13 7-way switching

ConnecttheFS-125-wayfootcontrollertoyouramplifierasdetailedabove,then

connectyoursuppliedFS-132-wayfootcontrollertothe‘EXT.’socketofyourFS-12

footcontroller,usinganystandardmonoguitarcableorspeakercable.

Inthisconfigurationyoucanaddtwoextra,programmableswitcheswhichare

configurableviatheBlackstarINSIDERsoftware.Pleaseseethe Footcontroller

sectionoftheINSIDERsoftwarefordetailoftheprogrammablefunctions.

Bydefault,switch‘A’onyourFS-13willtogglethecurrentModulationeffect,and

switch‘B’willtogglethecurrentDelayeffect.Whenusingthis7-wayswitching

configurationthetwomarkersatrightsideofthedisplayoftheFS-12willshowthe

on/offstateoftheeffectforeachswitch,asshownbelow.

English

LOOPER MODE PATCH MODE

Action Toggle Scroll

A (press) Play/Record/Startand

Stopoverdub

Patchtoggle(CH1andCH2

ofthecurrentBANK) PatchDown(1-12)

B (press) Stopplayback/Cancel BANKscrollup PatchUp(1-12)

B (hold) Eraseloopmemory - -

A + B (press) Undolastoverdub - -

A + B (hold) SwitchtoPATCHmode SwitchtoLOOPERMode SwitchtoLOOPERMode

ABCDE

AMP EXT.

ABCDE

AMP EXT.

FS-12 FS-13 (supplied)

FS-13 Ef

fect switch

toggle states

LOOPER MODE

Action

D (press) Play/Record/Startand

Stopoverdub

E (press) Stopplayback/Cancel

E (hold) Eraseloopmemory

D + E (press) Undolastoverdub

1918

Advanced Features

YourID:Coreamplifierhasfurtheradvancedfeatureswhichareaimedatmorein-

depthuserswhoenjoygettingthemostfromtheiramplifier.Thesefeaturesdo

nothaveindependentcontrolsonthefrontpaneloftheamplifier,butinsteadare

accessedbyusingtheTapswitch(14)asa‘shiftkey’andusingothercontrolsto

accessthesefeatures.

Resonance –Tap+Bass

TheResonancecontrolsetstheoverallbassresponse.Atlowersettingsthecleans

willbetightandfunkyandoverdriveswillbefocusedintheirbassresponse.At

increasedsettingsthecleansoundswillbebecomefullandwarm,whilstthecrunch

andoverdrivetoneswillbemorebassheavyandresonant.

Presence –Tap+Treble

ThePresencecontrolsetstheoveralltrebleresponse.Percussivehigh-endcanbe

accentuatedoncleansoundsandtheamountofaggressivetreblecontrolledwith

crunchandoverdrivesettings.

USB Recording Level –Tap+Gain

AsstatedintheUSBAudiosection(seepage15),theoutputleveloftheUSBaudio

signalfromyourID:Coreamplifiercanbecontrolledindependentlyofyouramplifier’s

speakervolumebyholdingdowntheTapswitch(14)whilstturningtheGaincontrol

(3)onthefrontpanel.

Effect Speed/Time – Tap+EffectsLevel

AsstatedintheEffectLevelsection(seepage11),thespeed/timeofthemodulation

anddelayeffectscanbecontrolledbyholdingdowntheTapswitch(14)whilst

turningtheEffectLevelcontrol(13)onthefrontpanel.Thiscanbeveryusefulfor

settingaspecificaccurateeffecttempoinsteadofusingtheTapswitch.

Global Emulated Output/Headphones Level – Tap+Volume

ThiscontrolstheoveralloutputvolumeoftheEmulatedOut/Phonesconnection,

allowingyoutotailortheleveltobestsuittheconnecteddevice,whetheraudio

interface,PAsystemorheadphonesofvariousimpedance.Thiscontrolcanboth

cutandboostthelevel,withthehalfwaypositionoftheVolumeknob(4)beingthe

defaultvolume.

English

Firmware Update

FirmwareupdatesareinitiatedviatheBlackstarINSIDERsoftware.Anewversion

oftheBlackstarINSIDERsoftwarewillbereleasedwheneveranupdateisavailable.

Importantnote:AlwaysconnecttheamplifiertoamainUSBport(usuallyfoundon

theontherearofyourPCorMac)whenupdatingthefirmware.Neveruseafront

mountedUSBport,USBhuboraUSBextensioncable.Doingsomayresultina

failedupdate,whichcouldcauseyouramplifiertobecomeunresponsive.

Whentheamplifierisconnected(viaUSB)toaversionoftheBlackstarINSIDER

softwarecontainingnewerfirmware,amessagewillbedisplayedpromptingyou

toinstallthelatestfiles.Whilstupdating,theamplifiercontrolswillbeunresponsive.

FrontpanelvoiceLEDswillcycletoindicatedataactivityduringtheupdateprocess.

Theamplifierpowershouldnotbeswitchedoffduringafirmwareupdate.Ifthe

amplifierisswitchedoffduringanupdate,thecontrolsmaybeunresponsiveafter

thepowerisreappliedandtheamplifierwillproducenosound.ThevoiceLEDswill

cycletoindicatethattheamplifiercontainsnovalidfirmware.

Ifyouareexperiencingproblemswiththefirmwareupdateprocesstheamplifier

canbeforcedtopowerupinUpdateMode.HolddowntheManual(17)&MOD(9)

switchessimultaneously,whilstswitchingontheamplifertoenterthismodewiththe

voiceLEDscyclingtoindicateUpdateMode.ConnecttheamplifiertotheBlackstar

INSIDERsoftwaretobeginafirmwareupdae.

TheamplifiermustbeconnectedtotheBlackstarINSIDERsoftwaretoreinstall

validfirmware.TheupdateprocesswillstartautomaticallyiftheBlackstarINSIDER

softwaredetectsthattheamplifierisinthisstate.

Technical Specification

ID:CORE STEREO 100

Power:2x50Watts(Stereo100Watts)

Weight (kg):12.5

Dimensions (mm): 573(W)x447(H)x241(D)

Technical Specification

ID:CORE STEREO 150

Power:2x75Watts(Stereo150Watts)

Weight (kg):14.5

Dimensions (mm): 624(W)x486(H)x259(D)

English

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Amplificador de Blackstar Amplification

Blackstar Amplification

Blackstar Amplification FLY Series Manual de usuario

Blackstar Amplification

Blackstar Amplification CV30 Manual de usuario

Blackstar Amplification

Blackstar Amplification ACOUSTIC:CORE 30 Manual de usuario

Blackstar Amplification

Blackstar Amplification SUPER FLY Manual de usuario

Blackstar Amplification

Blackstar Amplification Sonnet 120 Manual de usuario

Blackstar Amplification

Blackstar Amplification AMPED 1 Manual de usuario

Blackstar Amplification

Blackstar Amplification Dept.10 Dual Drive Manual de usuario

Blackstar Amplification

Blackstar Amplification HT-5 Manual de usuario

Blackstar Amplification

Blackstar Amplification Unity U700H Elite Manual de usuario

Blackstar Amplification

Blackstar Amplification JJN-20RH MkII Manual de usuario

Blackstar Amplification

Blackstar Amplification Sonnet 60 Manual de usuario

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario