Black Widow Security BW 700 Manual de usuario

Congratulations on your purchase of the Factory Keyless

Upgrade security system. Your Factory Keyless Upgrade is

manufactured in the U.S.A. and designed by leading security

experts using the latest state of the art technology.

Items Supplied with the Factory Keyless Entry

• Receiver and control module

• Valet/override switch

• Wiring harness, fuseholder & fuse

• LED status indicator

• Siren*

• Shock sensor*

* NOT INCLUDED WITH “E” MODELS

OWNER S MANUAL

SERIES 700/700E

FACTORY KEYLESS UPGRADE

The Factory Keyless Upgrade is designed to interface with an

existing factory keyless entry system, converting it to a full

security system.

Arming Operation:

To Arm the system, press the lock button on the factory remote.

The horn/siren will chirp once.

The parking lights will flash once (optional).

The doors will lock.

The LED will turn on solid for 2 seconds, then begin flashing

slowly. Once the LED starts flashing the system will be fully

armed.

Disarming Operation:

To Disarm the system,press the unlock button on the factory remote.

The horn/siren will chirp twice.

The parking lights will flash twice (optional).

The doors will unlock.

The LED will stop flashing.

Passive Arming:

The passive arming feature may be selected selected during

installation to keep the vehicle secure in the event the user

forgets to arms the system upon exiting the vehicle. After the

ignition is turned off and the last door is closed, the led will flash

rapidly signifying that the system will arm in 30 seconds. After 30

seconds the sytem will arm as described under Arming Operation,

but the doors will not lock.

Valet Mode:

In the event the vehicle requires servicing, washing, etc., the Valet

Mode can be activated to disable the alarm, while still allowing the

keyless entry feature to operate. The Valet Mode will also disable

the system’s passive arming feature (if programmed for passive

arming). To enter Valet Mode:

Turn the ignition key on.

Press and hold the valet/override switch for approximately 5

seconds.

The LED will turn on solid indicating the system is inValet Mode.

To exitValet Mode repeat the procedure above. The LED will turn

off indicating the system has exited Valet Mode.

Emergency Override

In the event the remote transmitter is lost or stolen, the

Emergency Override feature may be used to deactivate the

system. To override the system:

Turn the ignition key on.

Press and hold the valet/override switch for approximately 5

seconds.

The LED will turn off indicating the system is disarmed.

LED Status Modes:

Valet = Solid

Pre-Arm State = Solid for 2 seconds

Armed = Slow flash

Disarmed = Off

Passive Arming Sequence = Rapid flash

System triggered while away = Slow double flash

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de seguridad de Black Widow Security

Black Widow Security

Black Widow Security BW RAS 120 Manual de usuario

Black Widow Security

Black Widow Security BW 752 Manual de usuario

Black Widow Security

Black Widow Security BW-1600 Manual de usuario

Black Widow Security

Black Widow Security BW 690 Manual de usuario

Black Widow Security

Black Widow Security BW FM 100 Manual de usuario

Black Widow Security

Black Widow Security BW 690 Manual de usuario

Black Widow Security

Black Widow Security BW 690-C Manual de usuario

Black Widow Security

Black Widow Security BW RAS 130 Manual de usuario

Black Widow Security

Black Widow Security BW FM 6150 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario