Black Box ServSwitch Wizard DVI KV1002A Manual de usuario

JUNE 2002

KV1002A

KV1004A

KV1022A

KV1024A

KV1042A

KV1044A

FREE tech support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746.

Mailin address: Black Box Corporation, 1000 Park Dr., Lawrence, PA 15055-1018

World-Wide Web: www. lack ox.com • E-mail: info@ lack ox.com

Customer Support Information:

THE SERVSWITCH™ FAMILY

Welcome to the ServSwitchTM Family!

Thank you for purchasing a BLACK BOX®ServSwitch™Brand KVM switch! We

appreciate your business, and we think you’ll appreciate the many ways that your

new ServSwitch keyboard/video/mouse switch will save you money, time, and

effort.

That’s because our ServSwitch family is all about breaking away from the

traditional, expensive model of computer management. You know, the one-size-

fits-all-even-if-it-doesn’t model that says, “One computer gets one user station, no

more, no less.” Why not a single user station (monitor, keyboard, and mouse) for

multiple computers—even computers of different platforms? Why not a pair of

user stations, each of which can control multiple computers? Why not multiple

user stations for the same computer?

With our ServSwitch products, there’s no reason why not. We carry a broad line

of robust solutions for all these applications. Do you have just two PCs and need an

economical alternative to keeping two monitors, keyboards, and mice on your

desk? Or do you need to share dozens of computers, including a mix of IBM®PC,

RS/6000®, Apple®Macintosh®, Sun Microsystems®, and SGI®compatibles among

multiple users with different access levels? Does your switch have to sit solidly on a

worktable and use regular everyday cables? Or does it have to be mounted in an

equipment rack and use convenient many-to-one cables? No matter how large or

small your setup is, no matter how simple or how complex, we’re confident we

have a ServSwitch system that’s just right for you.

The ServSwitch™family from Black Box—the one-stop answer for all your KVM-

switching needs!

This manual will tell you all about your new ServSwitch™ Wizard DVI, including

how to install, operate, and troubleshoot it. For an introduction to the ServSwitch

Wizard DVI, see Chapter 2. The ServSwitch Wizard DVI product codes covered in

this manual are:

KV1002A KV1022A KV1042A

KV1004A KV1024A KV1044A

This manual also includes information about the Remote-Control Module

accessory, whose product codes are:

KV6REM KV6REM-25 KV6REM-50 KV6REM-75

SERVSWITCH™ WIZARD DVI

TRADEMARKS USED IN THIS MANUAL

BLACK BOX and the logo are registered trademarks, and ServSwitch,

ServSwitch Wizard, and ServSwitch Wizard DVI are trademarks, of Black Box

Corporation.

Apple and Macintosh are registered trademarks of Apple Computer, Inc.

Compaq and Alpha are registered trademarks of Compaq Computer Corporation.

Hewlett-Packard, HP, and Vectra are registered trademarks of Hewlett-Packard.

IBM, PS/2, and RS/6000 are registered trademarks of International Business

Machines Corporation.

Microsoft, IntelliMouse, MS-DOS, Windows, Windows NT, and Windows XP are

registered trademarks or trademarks of Microsoft Corporation in the United

States and/or other countries.

Sun Microsystems is a registered trademark of Sun Microsystems, Inc. in the

United States and other countries.

Any other trademarks mentioned in this manual are acknowledged to be the property of the

trademark owners.

FCC/IC STATEMENTS

FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA

RADIO-FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses, and can radiate radio-frequency energy, and if not

installed and used properly, that is, in strict accordance with the manufacturer’s

instructions, may cause interference to radio communication. It has been tested

and found to comply with the limits for a Class A computing device in accordance

with the specifications in Subpart B of Part 15 of FCC rules, which are designed to

provide reasonable protection against such interference when the equipment is

operated in a commercial environment. Operation of this equipment in a

residential area is likely to cause interference, in which case the user at his own

expense will be required to take whatever measures may be necessary to correct the

interference.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Shielded cables must be used with this equipment to maintain compliance with

radio-frequency energy-emission regulations and ensure a suitably high level of

immunity to electromagnetic disturbances.

This digital apparatus does not exceed the Class A limits for radio noise emission from digital

apparatus set out in the Radio Interference Regulation of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le

brouillage radioélectrique publié par Industrie Canada.

SERVSWITCH™ WIZARD DVI

EUROPEAN UNION DECLARATION OF CONFORMITY

This equipment has been tested and found to comply with the limits for a class A

computing device in accordance with the specifications in the European standard

EN55022. These limits are designed to provide reasonable protection against

harmful interference. This equipment generates, uses, and can radiate radio

frequency energy and if not installed and used in accordance with the instructions

may cause harmful interference to radio or television reception. However, there is

no guarantee that harmful interference will not occur in a particular installation. If

this equipment does cause interference to radio or television reception, which can

be determined by turning the equipment on and off, the user is encouraged to

correct the interference with one or more of the following measures:

(a) Reorient or relocate the receiving antenna.

(b)Increase the separation between the equipment and the receiver.

the receiver is connected.

(d)Consult the supplier or an experienced radio/TV technician for help.

Shielded cables must be used with this equipment to maintain compliance with

radio-frequency energy-emission regulations and ensure a suitably high level of

immunity to electromagnetic disturbances.

NOM STATEMENT

NORMAS OFICIALES MEXICANAS (NOM)

ELECTRICAL SAFETY STATEMENT

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de

que el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para

referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de

operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca

de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc.

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que

sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea

recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá

a lo descrito en las instrucciones de operación. Todo otro servicio deberá ser

referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no

interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,

alfombra o superficie similar puede bloquea la ventilación, no se debe colocar

en libreros o gabinetes que impidan el flujo de aire por los orificios de

ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor

como radiadores, registros de calor, estufas u otros aparatos (incluyendo

amplificadores) que producen calor.

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del

tipo descrito en el instructivo de operación, o como se indique en el aparato.

SERVSWITCH™ WIZARD DVI

12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización

del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no

sean pisados ni pellizcados por objetos colocados sobre o contra ellos,

poniendo particular atención a los contactos y receptáculos donde salen del

aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas

de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no sea

usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean

derramados sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su

desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

TABLE OF CONTENTS

Contents

Chapter Page

1. Specifications ............................................................................................. 9

2. Introduction ............................................................................................. 12

2.1 Features and Benefits ....................................................................... 12

2.2 The Complete Package ..................................................................... 14

2.3 The ServSwitch Wizard DVI Illustrated ........................................... 15

2.4 Safety Concerns ................................................................................. 17

3. Installation ................................................................................................ 18

3.1 What You Will Need .......................................................................... 18

3.2 Placement .......................................................................................... 19

3.3 Connecting Your Equipment ........................................................... 19

3.3.1 Systems with a Single Wizard DVI .......................................... 20

3.3.2 Cascaded Wizard DVI Systems for More Than Four CPUs .. 22

3.3.3 Synchronized Wizard DVI Systems for CPUs with up to

Eight DVI Outputs or with Both DVI and Analog

Video Outputs .................................................................... 24

3.3.4 ServSwitch DVI KVM Cables ................................................... 27

3.4 Powering the Wizard DVI ................................................................. 28

4. Configuration ........................................................................................... 29

4.1 Configuring Your PCs ....................................................................... 29

4.2 Configuring the ServSwitch Wizard DVI ......................................... 29

4.2.1 Turning Bootup Autoswitching On or Off ......................... 29

4.2.2 Entering Configuration Mode ............................................. 30

4.2.3 Setting the Screen-Saver Timeout ....................................... 31

4.2.4 Autoscanning: Setting the Scan Mode and Pause Time ..... 32

4.2.5 Enforcing Mouse Speed ....................................................... 34

4.2.6 Setting Mouse-Mode Reporting and

Enabling/Disabling Mouse Switching ............................ 35

4.2.7 Choosing Active Ports or All Ports for

Keyboard-Tab and Mouse Switching .............................. 36

4.2.8 Setting the Hotkey Sequence ............................................... 37

4.2.9 Viewing the Firmware Revision, Restoring Mouse

Function, or Resetting to Factory Defaults ..................... 38

4.2.10 Setting the Password ............................................................. 39

4.2.11 Exiting Configuration Mode ................................................ 39

SERVSWITCH™ WIZARD DVI

Contents (continued)

Chapter Page

5. Operation ................................................................................................. 40

5.1 Power Status ..................................................................................... 40

5.2

The Front-Panel Pushbutton and the Remote-Control Module

... 41

5.3 The Status Display ........................................................................... 42

5.4 Things to Keep in Mind About the Keyboards and Mice ............. 43

5.5 Keyboard Control: Hotkey Commands ......................................... 44

5.6 Mouse Control ................................................................................. 46

5.7 Re-Enabling a Disconnected PS/2 Mouse ..................................... 47

5.8 Hot-Plugging Devices Into the ServSwitch Wizard DVI and

Re-Enabling Disconnected CPU PS/2 Mouse Ports ................ 47

5.9 RS-232 Control ................................................................................ 49

5.10 Operating Cascaded ServSwitch Wizard DVIs ............................... 49

5.11 Operating Synchronized ServSwitch Wizard DVIs ........................ 50

5.12 Performing a Warm Reset .............................................................. 51

5.13 Upgrading the Wizard DVI’s Firmware ......................................... 51

6. Troubleshooting ...................................................................................... 54

6.1 Things to Try ..................................................................................... 54

6.2 Calling Black Box .............................................................................. 56

6.3 Shipping and Packaging ................................................................... 56

Appendix: Cable Guidelines .......................................................................... 57

A.1 Cabling from the Keyboard, Monitor, and Mouse to the

Wizard DVI .................................................................................... 57

A.2 Cabling from the Wizard DVI to the CPUs ..................................... 57

A.3 Cabling Attached to the OPTIONS Port ......................................... 59

CHAPTER 1: Specifications

1. Specifications

Compliance: CE (EN55022 Class A); FCC Part 15 Subpart B Class A,

IC Class/classe A

Standards: Supports DDC2B signaling

Interfaces: Video: Single-link DVI (Digital Visual Interface);

Keyboard and mouse: IBM PS/2 compatible; with

appropriate adapters, also supports CPUs with

EIA/TIA RS-232 mouse ports;

OPTIONS port: EIA/TIA RS-232 proprietarily pinned on

DB15

Resolution and

Refresh Rate: Up to 1600 x 1200 noninterlaced at up to 60 Hz (higher

refresh rates possible at lower resolutions); with video

cards and monitors that support composite images

transmitted on multiple heads, the KV1022A and

KV1024A can support up to 2400 x 1600 and the

KV1042A and KV1044A can support up to 3200 x 2400

Protocol: RS-232: Asynchronous

Data Format: RS-232: 8 data bits, no parity, 1 stop bit

Data Rate: RS-232: 1200 bps

Flow Control: RS-232: None

Maximum

Distance: 2 m (6 ft.) if interface-powered or 5 m (16 ft.) if

AC-powered to any attached keyboard, monitor, and

mouse;

5 m (16 ft.) to any attached CPU or cascaded KVM switch

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Black Box

Black Box

Black Box sW901aE Manual de usuario

Black Box

Black Box SW1002A Manual de usuario

Black Box

Black Box AlertWerks EME102A-R3 Manual de usuario

Black Box

Black Box ServSwitch KV0004A Manual de usuario

Black Box

Black Box SM025A-FFF Manual de usuario

Black Box

Black Box KV9508A Manual de usuario

Black Box

Black Box LB8405A-R2 Manual de usuario

Black Box

Black Box LPB1308A Manual de usuario

Black Box

Black Box LB9020A-R2 Manual de usuario

Black Box

Black Box PCA45A Manual de usuario

Black Box

Black Box LPDG705A Manual de usuario

Black Box

Black Box KV9104A Manual de usuario

Black Box

Black Box AVSW-HDMI4X4 Manual de usuario

Black Box

Black Box ServSwitch KV780A Manual de usuario

Black Box

Black Box SW970A Manual de usuario

Black Box

Black Box SW595A Manual de usuario

Black Box

Black Box ServSwitch Summit KV1500A Manual de usuario

Black Box

Black Box SERVSWITCH PANTHER KV1108A Manual de usuario

Black Box

Black Box LH8112A Manual de usuario

Black Box

Black Box AVSW-DVI8X1 Manual de usuario

Black Box

Black Box ServSwitch ACU1006RA Manual de usuario

Black Box

Black Box ServMaster Manual de usuario

Black Box

Black Box ME500A Manual de usuario

Black Box

Black Box AVSW-HDMI2X1A Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario