Black Box ServSwitch Duo KV6104SA Manual de usuario

KV6104SA

KV6108SA

KV6112FA

KV6116FA

For FREE Technical Support 24 hours a day, 7 days a week, call 724-746-5500.

Address: 1000 Park Dr., Lawrence, PA 15055-1018 • Phone: 724-746-5500 • Fax: 724-746-0746

World-Wide Web: http://www.blackbox.com • E-mail: [email protected]

Customer Support Information:

JULY 1998

THE SERVSWITCH™ FAMILY

Welcome to the ServSwitchTM Family!

Thank you for purchasing a BLACK BOX®ServSwitch™Brand KVM switch! We

appreciate your business, and we think you’ll appreciate the many ways that your

new ServSwitch keyboard/video/mouse switch will save you money, time, and

effort.

That’s because our ServSwitch family is all about breaking away from the

traditional, expensive model of computer management. You know, the one-size-

fits-all-even-if-it-doesn’t model that says, “One computer gets one user station, no

more, no less.” Why not a single user station (monitor, keyboard, and mouse) for

multiple computers—even computers of different platforms? Why not a pair of

user stations, each of which can control multiple computers? Why not multiple

user stations for the same computer?

With our ServSwitch products, there’s no reason why not. We carry a broad line

of robust solutions for all these applications. Do you have just two PCs, and need

an economical alternative to keeping two monitors, keyboards, and mice on your

desk? Or do you need to share dozens of computers, including a mix of IBM®PC,

RS/6000®, Apple®Macintosh®, Sun Microsystems®, and SGI®compatibles among

multiple users with different access levels? Does your switch have to sit solidly on a

worktable and use regular everyday cables? Or does it have to be mounted in an

equipment rack and use convenient many-to-one cables? No matter how large or

small your setup is, no matter how simple or how complex, we’re confident we

have a ServSwitch system that’s just right for you.

The ServSwitch™family from Black Box—the one-stop answer for all your

KVM-switching needs!

This manual will tell you all about your new ServSwitch Duo™unit, including

how to install, operate, and troubleshoot it. For an introduction to the ServSwitch

Duo, see Chapter 2. The ServSwitch Duo product codes covered in this manual

are:

KV6104SA

KV6108SA

KV6112FA

KV6116FA

This manual also includes information about the Remote-Control Module

accessory, whose product code is:

KV6REM

SERVSWITCH DUO™

TRADEMARKS USED IN THIS MANUAL

BLACK BOX and the logo are registered trademarks, ServSwitch

and ServSwitch Duo are trademarks of Black Box Corporation.

Apple and Macintosh are registered trademarks of Apple Computer, Inc.

Compaq is a registered trademark of Compaq Computer Corporation.

Gateway 2000 is a registered trademark of Gateway 2000 Corporation.

Hewlett-Packard is a registered trademark of Hewlett-Packard.

IBM, PC/AT, PS/2, RS/6000, and ThinkPad are registered trademarks, and

PC/XT is a trademark, of IBM Corporation.

Logitech, MouseMan+, and Pilot Mouse+ are trademarks of Logitech, Inc.

Microsoft and Windows are registered trademarks, and IntelliMouse is a

trademark, of Microsoft Corporation.

SGI is a registered trademark of Silicon Graphics, Inc.

Sun Microsystems is a registered trademark of Sun Microsystems, Inc.

Any other trademarks mentioned in this manual are acknowledged to be the property of the

trademark owners.

FCC/IC STATEMENTS

FEDERAL COMMUNICATIONS COMMISSION

AND

INDUSTRY CANADA

RADIO FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses, and can radiate radio frequency energy and if not

installed and used properly, that is, in strict accordance with the manufacturer’s

instructions, may cause interference to radio communication. It has been tested

and found to comply with the limits for a Class A computing device in accordance

with the specifications in Subpart J of Part 15 of FCC rules, which are designed to

provide reasonable protection against such interference when the equipment is

operated in a commercial environment. Operation of this equipment in a

residential area is likely to cause interference, in which case the user at his own

expense will be required to take whatever measures may be necessary to correct

the interference.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Shielded cables must be used with this equipment to maintain compliance with

radio frequency energy emission regulations and ensure a suitably high level of

immunity to electromagnetic disturbances.

This digital apparatus does not exceed the Class A limits for radio noise emission from

digital apparatus set out in the Radio Interference Regulation of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le

brouillage radioélectrique publié par Industrie Canada.

SERVSWITCH DUO™

EUROPEAN UNION DECLARATION OF CONFORMITY

This equipment has been tested and found to comply with the limits for a class B

computing device in accordance with the specifications in the European standard

EN55022. These limits are designed to provide reasonable protection against

harmful interference. This equipment generates, uses and can radiate radio

frequency energy and if not installed and used in accordance with the instructions

may cause harmful interference to radio or television reception. However, there is

no guarantee that harmful interference will not occur in a particular installation. If

this equipment does cause interference to radio or television reception, which can

be determined by turning the equipment on and off, the user is encouraged to

correct the interference with one or more of the following measures:

(a) Reorient or relocate the receiving antenna.

(b) Increase the separation between the equipment and the receiver.

the receiver is connected.

(d) Consult the supplier or an experienced radio/TV technician for help.

Shielded cables must be used with this equipment to maintain compliance with

radio frequency energy emission regulations and ensure a suitably high level of

immunity to electromagnetic disturbances.

NOM STATEMENT

NORMAS OFICIALES MEXICANAS (NOM)

ELECTRICAL SAFETY STATEMENT

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes

de que el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para

referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones

de operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo,

cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc..

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales

que sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea

recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá

a lo descrito en las instrucciones de operación. Todo otro servicio deberá ser

referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no

interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,

alfombra o superficie similar puede bloquea la ventilación, no se debe colocar

en libreros o gabinetes que impidan el flujo de aire por los orificios de

ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor

como radiadores, registros de calor, estufas u otros aparatos (incluyendo

amplificadores) que producen calor.

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del

tipo descrito en el instructivo de operación, o como se indique en el aparato.

SERVSWITCH DUO™

12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización

del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no

sean pisados ni pellizcados por objetos colocados sobre o contra ellos,

poniendo particular atención a los contactos y receptáculos donde salen

del aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas

de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no sea

usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean

derramados sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su

desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

TABLE OF CONTENTS

Contents

Chapter Page

1. Specifications ............................................................................................... 9

2. Introduction ............................................................................................... 11

2.1 Features and Benefits of the ServSwitch Duo ................................... 11

2.2 The Complete ServSwitch Duo Package ............................................ 12

2.3 The ServSwitch Duo Illustrated ......................................................... 13

2.4 Safety Concerns ................................................................................... 15

3. Installation .................................................................................................. 16

3.1 What You Will Need ............................................................................ 16

3.2 Rackmounting the ServSwitch Duo (Optional) ................................ 17

3.3 Connecting Your Devices ................................................................... 17

3.4 Connecting Power ............................................................................... 19

4. Configuration ............................................................................................. 20

4.1 Configuring Your PCs ......................................................................... 20

4.2 Configuring the ServSwitch Duo ....................................................... 20

4.2.1 Entering Configuration Mode ............................................... 20

4.2.2 Setting the Screen-Saver Timeout ......................................... 21

4.2.3 Autoscanning: Setting the Scan Mode and Pause Time ....... 22

4.2.4 Setting the Switchover Timeout ............................................. 23

4.2.5 Setting Mouse-Mode Reporting and Mouse Switching ........ 23

4.2.6 Setting the Hotkey Sequence ................................................. 25

4.2.7 Viewing the Firmware Revision, Restoring Mouse

Function, or Resetting to Factory Defaults ......................... 26

4.2.8 Setting the Appearance of the On-Screen Display ............... 26

4.2.9 Setting the Password ............................................................... 27

4.2.10 Exiting Configuration Mode .................................................. 27

SERVSWITCH DUO™

Contents (continued)

Chapter Page

5. Operation ................................................................................................... 28

5.1 Power Status ...................................................................................... 28

5.2 The Status LEDs ............................................................................... 28

5.3 The Front-Panel Pushbuttons and the Remote-Control Module .. 28

5.4 The Status Display ............................................................................ 30

5.5 Using the Dual Control Ports (A and B) ........................................ 31

5.6 Things to Keep in Mind About the Keyboards and Mice .............. 31

5.7 Keyboard Control: Hotkey Commands ........................................... 32

5.8 On-Screen Menu Control ................................................................ 35

5.8.1 Adding a Computer to the Menu List ................................... 36

5.8.2 Deleting a Computer from the Menu List ............................ 36

5.8.3 Editing a Computer on the Menu List .................................. 36

5.8.4 Selecting a Computer on the Menu List ............................... 37

5.8.5 Exiting the Menu .................................................................... 37

5.8.6 Configuring the Menu ............................................................ 37

5.8.7 Summary of Keys Used by the Menu and Their Functions .. 37

5.9 Mouse Control .................................................................................. 38

5.10 Re-Enabling a Disconnected PS/2 Mouse ...................................... 38

5.11 Hot-Plugging Devices Into the ServSwitch Duo and

Re-Enabling Disconnected CPU PS/2 Mouse Ports .................... 38

5.12 RS-232 Control .................................................................................. 40

5.13 Cascading ServSwitch Duos ............................................................. 40

6. Troubleshooting ........................................................................................ 43

6.1 Things to Try ....................................................................................... 43

6.2 Calling Black Box ................................................................................ 46

6.3 Shipping and Packaging ..................................................................... 46

Appendix: Cable and Connector Guidelines .................................................. 47

A.1 Cabling: Keyboard, Monitor, and Mouse to ServSwitch Duo ........... 47

A.2 Cabling: ServSwitch Duo to PCs ......................................................... 47

A.3 The Expansion Port ............................................................................ 49

CHAPTER 1: Specifications

1. Specifications

Compliance — CE (EN55022 Class B); FCC Part 15 Subpart J Class A,

IC Class/ classe A

Standards — VGA, SVGA, XGA, or XGA-2 video

Interfaces — Video: VGA;

Keyboard and mouse: IBM PS/2 compatible;

Expansion port: Proprietary variant of TIA RS-232

Resolution — Up to 1600 x 1200 noninterlaced at up to 100 Hz

Protocol — RS-232: Asynchronous

Data Format — RS-232: 8 data bits, no parity, 1 stop bit

Data Rate — RS-232: 1200 bps

Flow Control — RS-232: None

Maximum

Distance — 10 m (32.8 ft.) to any attached keyboard, monitor, and

mouse;

30 m (98.4 ft.) to any attached CPU or cascaded

ServSwitch Duo unit;

40 m (131.2 ft.) to an attached ServSwitch Duo Extender

across Premium Extender Cable

User Controls — Keyboard commands;

Mouse-click functions;

(2) Front-mounted pushbuttons;

On-screen menu

Indicators — All front-mounted:

KV6104SA, KV6108SA: Single 7-segment status display

with activity LED;

KV6112FA, KV6116FA: Dual 7-segment status display

with activity LED;

KV6104SA: (4) Port LEDs;

KV6108SA: (8) Port LEDs;

KV6112FA: (12) Port LEDs;

KV6116FA: (16) Port LEDs

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Black Box

Black Box

Black Box Stackable MiniHub Manual de usuario

Black Box

Black Box LGB5124A Manual de usuario

Black Box

Black Box SM720C Manual de usuario

Black Box

Black Box SWI037A Manual de usuario

Black Box

Black Box LGB708A-R2 Manual de usuario

Black Box

Black Box ServSwitch CX Quad IP KV4161A Manual de usuario

Black Box

Black Box KV9104A Manual de usuario

Black Box

Black Box ServSwitch 4site Manual de usuario

Black Box

Black Box LB9217A-R2 Manual de usuario

Black Box

Black Box ServSwitch DTX5002 Manual de usuario

Black Box

Black Box ACX576 Manual de usuario

Black Box

Black Box LGS103AE Manual de usuario

Black Box

Black Box SW1035A Manual de usuario

Black Box

Black Box ServSwitch Secure SW2006A-USB-EAL Manual de usuario

Black Box

Black Box LH8000A-M Manual de usuario

Black Box

Black Box IC1020A Manual de usuario

Black Box

Black Box ServSwitch ACU5501A-R4 Manual de usuario

Black Box

Black Box LGB5052A-R3 Manual de usuario

Black Box

Black Box ET0100A Manual de usuario

Black Box

Black Box SWI083A Manual de usuario

Black Box

Black Box AC1032A-2 Manual de usuario

Black Box

Black Box 40418 Manual de usuario

Black Box

Black Box IC454AE Manual de usuario

Black Box

Black Box LBH120A-H SERIES Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario