Black Box SerSwitch ACS260A-U-MM Manual de usuario

BL A C K B O X®

Pure digital extension over fiber optic cable

with zero compression technology. Supports EDID,

stereo audio, and serial port control.

ServSwitch™Brand DVI-D USB KVM-over-Fiber Extender

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax

724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,

PA 15055-1018 • Web site: www.blackbox.com • E-mail: [email protected]

Customer

Support

Information

March 2010

ACS260A-U-MM

Page 2 724-746-5500 | blackbox.com

ServSwitch Brand DVI-D USB KVM-over-Fiber Extender

FEDERAL COMMUNICATIONS COMMISSION AND

INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses, and can radiate radio-frequency energy,

and if not installed and used properly, that is, in strict accordance with the

manufacturer’s instructions, may cause interference to radio communication.

It has been tested and found to comply with the limits for a Class A computing

device in accordance with the specifications in Subpart J of Part 15 of FCC rules,

which are designed to provide reasonable protection against such interference

when the equipment is operated in a commercial environment. Operation of

this equipment in a residential area is likely to cause interference, in which case

the user at his own expense will be required to take whatever measures may be

necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise

emission from digital apparatus set out in the Radio Interference Regulation

of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les

limites applicables aux appareils numériques de la classe A prescrites dans le

Règlement sur le brouillage radioélectrique publié par Industrie Canada.

Page 3

724-746-5500 | blackbox.com

NOM Statement

Normas Oficiales Mexicanas (NOM)

Electrical Safety Statement

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que

el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para

referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación

deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la

tina de baño, lavabo, sótano mojado o cerca de una alberca, etc.

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean

recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea

recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá

lo descrito en las instrucciones de operación. Todo otro servicio deberá ser

referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no

interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,

alfombra o superficie similar puede bloquea la ventilación, no se debe

colocar en libreros o gabinetes que impidan el flujo de aire por los orificios

de ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor

como radiadores, registros de calor, estufas u otros aparatos (incluyendo

amplificadores) que producen calor.

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo

descrito en el instructivo de operación, o como se indique en el aparato.

12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización

del equipo no sea eliminada.

Page 4 724-746-5500 | blackbox.com

ServSwitch Brand DVI-D USB KVM-over-Fiber Extender

13. Los cables de la fuente de poder deben ser guiados de tal manera que no

sean pisados ni pellizcados por objetos colocados sobre o contra ellos,

poniendo particular atención a los contactos y receptáculos donde salen del

aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las

lineas de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no sea

usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean

derramados sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su

desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

Page 5

724-746-5500 | blackbox.com

Trademarks Used in this Manual

TRADEMARKS USED IN THIS MANUAL

Black Box and the Double Diamond logo are registered trademarks, and

ServSwitch is a trademark, of BB Technologies, Inc.

Any other trademarks mentioned in this manual are acknowledged to be

the property of the trademark owners.

Page 6 724-746-5500 | blackbox.com

ServSwitch Brand DVI-D USB KVM-over-Fiber Extender

Contents

Chapter Page

1. Specifications...................................................................................... 7

2. Overview ......................................................................................... 8

2.1 Introduction ................................................................................ 8

2.2 Features ...................................................................................... 8

2.3 What’s Included .......................................................................... 9

2.4 What You Need to Supply ........................................................ 10

2.5 Hardware Description ............................................................... 10

2.5.1 Console Unit................................................................... 10

2.5.2 Computer Unit ............................................................... 12

2.6 Typical Application .................................................................... 14

3. Installation ....................................................................................... 15

3.1 Using Fiber Optic Cable............................................................. 15

3.2 Before Installation ..................................................................... 16

3.3 Installation Steps ....................................................................... 16

3.3.1 Console Unit................................................................... 16

3.3.2 Computer Unit ............................................................... 16

4. Operation ....................................................................................... 17

4.1 LED Indicators ........................................................................... 17

4.2 Selecting Computers Using Push Buttons ................................. 18

4.2.1 Push Button on Console Unit ......................................... 18

4.2.2 Push Button on Computer Unit...................................... 18

4.3 Selecting Computers Using Keyboard Hotkey Commands ........ 19

4.3.1 Mask Hotkey Switch....................................................... 20

4.3.2 Hotkey Commands......................................................... 22

4.3.3 Push Button for Alternate Hotkey Control

(Computer Unit Only)..................................................... 27

5. Cascade Configuration..................................................................... 28

6. Serial Configuration.......................................................................... 30

Appendix. Cable Requirements/Fiber Optic Cables/Blu-ray..................... 31

A.1 Cable Requirements ......................................................................... 31

A.2 Fiber Optic Cables ............................................................................ 31

A.3 Blu-ray Ready ................................................................................... 31

Page 7

724-746-5500 | blackbox.com

Chapter 1: Specifications

1. Specifications

Distance: 1080p: 3200 ft. (1000 m);

1080i: 6400 ft. (2000 m)

HDCP Support: Yes

Hotkey: Yes

Video Resolution (Maximum): Full HD: 1920 x 1080;

WUXGA: 1920 x 1200

User Controls: Each unit: (1) Push Button: Control Status Switch

Connectors:

Console Unit:

Console Interface: Serial port: (1) DB9 M DTE;

Keyboard and mouse: (2) USB Type A F,

Monitor: (1) DVI-I F;

Audio jack: (1) speaker and (1) microphone;

Computer Interface:

Serial port: (1) DB9 F DCE;

Keyboard and mouse: (1) USB Type B F,

Monitor: (1) DVI-I F,

Audio: (1) speaker and (1) microphone;

Interconnect: (1) duplex SC;

Computer Unit:

Console Interface: (1) DB9 M DTE;

Keyboard and mouse: (1) USB Type A F;

Monitor: (1) DVI-I F;

Audio jack: (1) speaker and (1) microphone;

Interconnect: (1) duplex SC;

Computer Interface: Serial port: (1) DB9 F DCE;

Keyboard and mouse: (1) USB Type B F;

Monitor: (1) DVI-I F;

Audio jack: (1) speaker and (1) microphone

Indicators: (5) LEDs: (1) Status, (1) Local, (1) Remote, (2) Serial

Power: Each unit: 9-12 VDC, 1.5 A

Size: Each unit: 1.7"H x 8.6"W x 5.2"D (4.4 x 21.8 x 13 cm)

Page 8 724-746-5500 | blackbox.com

ServSwitch Brand DVI-D USB KVM-over-Fiber Extender

2. Overview

2.1 Introduction

The DVI-D USB KVM over Fiber Optic Extender consists of a console unit and a

computer unit. It enables you to remotely access and control a computer or KVM

switch up to 6400 feet (2000 m) away from using only fiber optic cable.

The extender optimizes the digital display up to a maximum resolution of Full HD

(1920 x 1080)/WUXGA (1920 x 1200)/UXGA (1600 x 1200). For cascaded applica-

tions, the dedicated Mask Hotkey switch masks the master KVM extender level,

enabling users to directly configure the slave level KVM switch as if the user were

sitting in front the slave KVM switch. This saves time, prevents errors, and makes

the hotkey configuration more predictable.

This KVM extender includes dual-user access, the ability to control multiple

computers through cascading with a KVM switch, push button for switching

control, front-panel LED for status indication, hotkey control and mask hotkey

switch for easy computer access, serial interface for instant data transfer, HDCP

compliance, Blu-ray display support, and audio jack (speaker + microphone)

for broadcasting. Besides, it is fully compatible with most popular monitor screen

resolutions such as XGA, SXGA, UXGA, WSXGA all the way to Full HD, WUXGA

system.

Ideal for transmission security, the extender eliminates electromagnetic radiation

emission. Use it for a variety of KVM extension applications, including in medical,

military, industrial, and high electromagnetic interference (EMI)/radio frequency

interference (RFI) environments where real-time, high-resolution audio/video

transmission is essential. The extender also enables you to secure the computers

and valuable data or manage them both in remote and local sites. No software

or DIP switches are required, just plug and play.

2.2 Features

• Connect the KVM extender pair via fiber optic cable

• Remotely locate the keyboard, mouse and monitor up to 6400 feet

(2000 meters) away from a computer (or a KVM switch) with a maximum

resolution of Full HD (1920 x 1080)/WUXGA (1920 x 1200)/UXGA (1600 x

1200)

• Supports USB console

• Hotkey functions for easy computer access

Page 9

724-746-5500 | blackbox.com

Chapter 2: Overview

• Mask Hotkey Switch on the rear panel masks the cascaded KVM extender itself

and directly configures KVM switch controls to the computer that’s attached to

the KVM switch.

• Can provide dual-user access to share multiple computers when KVM switch

is cascaded

• Fiber optic connectors provide high-speed and long-distance transmission

• Supports serial interface for instant data transfer

• Fully compatible with DVI and/or HDMI standard by DDWG

• HDCP-compliant and Blu-ray ready

• Completely free from electromagnetic interference (EMI)

• Ideal for professional audio/video applications

• Optional fiber-only system without DDC function (pseudo DDC signal can be

transmitted for EDID information.)

• Uses multimode optical fiber

• Transmits video digitally for zero signal loss

• Compatible with most opular screen resolutions for XGA, SXGA, UXGA,

WSXGA all the way to Full HD, WUXGA system

2.3 What’s Included

Your package should contain the following items. If anything is missing or

damaged, contact Black Box Technical Support at 724-746-5500.

• (1) KVM Extender console unit

• (1) KVM Extender computer unit

• (2) power adapters

• (2) power cords

• (2) sets [(8) pieces] foot pads

• (2) sets of DVI 2-to-2 USB cable with audio cable

• (2) sets of rackmount brackets with screws

• (1) 96-foot (30-m) fiber optic cable

• This user’s manual

Page 10 724-746-5500 | blackbox.com

ServSwitch Brand DVI-D USB KVM-over-Fiber Extender

2.4 What You Need to Supply

• (1) computer with USB port(s) and DVI video output port

• (1) USB keyboard/mouse to control the console

• Microphone, speakers, HDCP-compliant monitors with DVI interface for the

HDCP video source (optional)

• DVI KVM cable(s)

• Fiber cable

• Serial cable (for serial device applications)

2.5 Hardware Description

2.5.1 Console Unit

Front Panel

Figure 2-1 shows the DVI-D USB KVM over Fiber Optic Extender Console Unit’s

front panel. Table 2-1 describes its components.

1 2 3 4 5 6

Figure 2-1. Console unit’s front panel.

Table 2-1. Console unit’s front panel components.

Number Component Description

1 Serial LED indicator RX: Data receive

2 Serial LED indicator TX: Data transmit

3 Remote LED indicator Control status

4 Local LED indicator Control status

5 Status LED indicator Green: Power on

Blue: Power on and connected to a local

unit

6 Push button Select control status

Otros manuales para SerSwitch ACS260A-U-MM

Tabla de contenidos

Otros manuales de Extensor de Black Box

Black Box

Black Box LB323A Manual de usuario

Black Box

Black Box LB300A-RACK Manual de usuario

Black Box

Black Box LB401A Manual de usuario

Black Box

Black Box LR0025A-KIT Manual de usuario

Black Box

Black Box ACS335A-AS Manual de usuario

Black Box

Black Box ACX1MT Series Manual de usuario

Black Box

Black Box ACS2028A Manual de usuario

Black Box

Black Box Extreme T LB323A Manual de usuario

Black Box

Black Box ACS335A Manual de usuario

Black Box

Black Box IC402A-R2 Manual de usuario

Black Box

Black Box ME0006A-V35 Manual de usuario

Black Box

Black Box AVS-HDB-TX Manual de usuario

Black Box

Black Box ServSwitch ACU2500A Manual de usuario

Black Box

Black Box SDSL Network Extender 2000 Manual de usuario

Black Box

Black Box ServSwitch ACU4001A Manual de usuario

Black Box

Black Box ACX310-R2 Manual de usuario

Black Box

Black Box VX-1001-RX Manual de usuario

Black Box

Black Box LR0005A-KIT Manual de usuario

Black Box

Black Box ServReach KVMCube Manual de usuario

Black Box

Black Box ACS2001A Manual de usuario

Black Box

Black Box ServSwitch ACU3001A Manual de usuario

Black Box

Black Box IC400A Manual de usuario

Black Box

Black Box Wizard AVU5001A Manual de usuario

Black Box

Black Box RemotePort Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario