Black & Decker PRMP1000 Manual de usuario

www.blackanddecker.ae PRMP1000

AR PT FR EN

1. Motor unit

2. On / o button

3. Turbo button

4. Blender attachment

5. Jar

6. Beater body

7. Beaters

8. Bowl lid

8a. Motor unit lock button

8b. Bowl lid lock buttons

9. Safety lid

10. Seal

11. Bowl

12. Drive spindle

13. Chopping blade

14. Cutter disc

15. Slicing blade

16. Shredding blade

17. Pusher

ENGLISH

13 15

Parts Identiﬁcation

ENGLISH

Intended use

Your Black+Decker stick blender has been

designed for blending, mixing, beating,

whipping, whisking and chopping food and

beverage ingredients. Do not use this

appliance for any other purpose. This

product is intended for indoor, household

use only.

This appliance is intended to be used in

household and similar applications such as:

• Staﬀ kitchen areas and shops

• Farm houses

• By clients in hotels, motels and

other residential type environments

• Bed and breakfast type environments

Read this entire manual carefully

before using the appliance.

Safety instructions

Warning! When using

mains-powered appliances, basic

safety precautions, including the following,

should always be followed to reduce the risk

of ﬁre, electric shock, personal injury and

material damage.

• The intended use is described in this

manual. The use of any accessory or

attachment or the performance of any

operation with this appliance other than

those recommended in this instruction

manual may present a risk of personal

injury.

• Retain this manual for future reference.

• Always route the cord carefully to avoid

a tripping hazard.

Using your appliance

• Make sure that the appliance is switched

o before connecting to or disconnecting

from the power supply.

• Always take care when using the

appliance.

• Do not use the appliance outdoors.

• Always protect the motor unit from water

or excessive humidity.

• Do not operate the appliance if your

hands are wet.

• Do not operate the appliance if you are

barefoot.

• Do not touch moving parts.

• Guide the power supply cord neatly so it

does not hang over the edge of a

worktop and cannot be caught

accidentally or tripped over.

• Never pull the power supply cord to

disconnect the plug from the socket.

Keep the power supply cord away from

heat, oil and sharp edges.

• Switch oﬀ and wait for the motor to stop

running before disconnecting the

appliance from the power supply.

• Never detach any part or accessory while

the appliance is still connected to the

power supply. Always disconnect the

appliance from the power supply ﬁrst.

• If the power supply cord is damaged

during use, disconnect the appliance from

the power supply immediately. Do not

touch the power supply cord before

disconnecting from the power supply.

ENGLISH

• Disconnect the appliance from the

power supply when not in use, before

ﬁtting or removing parts and before

cleaning.

• Misuse could cause an injury.

• Care is needed when handling cutting

blades, especially when removing the

blades, emptying the bowl and during

cleaning.

Warning! Keep ﬁngers, loose clothing, hair,

jewellery etc. away from moving parts and

blades. Be careful if hot liquid is poured into

the food processor as it can be ejected out

of the apliance due to sudden steaming

Safety of others

• This appliance is not intended for use by

persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience and

knowledge, unless they have been given

supervision or instruction concerning use

of the appliance by a person responsible

for their safety.

• Children should be supervised to ensure

that they do not play with the appliance.

• Do not allow children or any person

unfamiliar with these instructions to use

the appliance.

• Do not allow children or animals to come

near the work area or to touch the

appliance or power supply cord. Close

supervision is necessary when the

appliance is used near children.

• It is not recommended that this product

is used by children.

• Never leave the appliance unattended

when in use.

• Always disconnect the appliance from

the supply if it is left uanttended and

before assembling, disassembling or

cleaning.

After use

• Switch oﬀ and remove the plug from the

socket before leaving the appliance

unattended and before changing,

cleaning or inspecting any parts of the

appliance.

• When not in use, the appliance should be

stored in a dry place. Children should not

have access to stored appliances.

• Care shall be taken when handling the

sharp cutting blades, when emptying the

bowl and during cleaning.

Inspection and repairs

• Switch oﬀ the appliance before cleaning,

changing accessories or approaching

parts which move in use.

• Always allow the motor to stop turning

before removing any cover or accessory

• Before use, check the appliance for

damaged or defective parts. Check for

breakage of parts, damage to switches

and any other conditions that may aect

its operation.

• Do not use the appliance if any part is

damaged or defective.

• Have any damaged or defective parts

repaired or replaced by an authorised

repair agent.

ENGLISH

• Before use, check the power supply cord

for signs of damage, ageing and wear.

• Do not use the appliance if the power

supply cord or mains plug is damaged or

defective.

• If the power supply cord or mains plug is

damaged or defective it must be

repaired by an authorised repair agent in

order to avoid a hazard. Do not cut the

power supply cord and do not attempt

to repair it yourself.

• Never attempt to remove or replace any

parts other than those speciﬁed in this

manual.

• Do not attempt to repair the appliance.

Take it to your nearest Black+Decker

owned or authorised Service Centre for

repair.

• Do not allow children to use the

appliance without supervision

Electrical safety

Before use, check that the mains voltage

corresponds to the voltage on the rating

plate.

This appliance is double insulated

in accordance with EN 60335;

therefore no earth wire is required.

• To avoid the risk of electric shock, do not

immerse the cord, plug or motor unit in

water or other liquid.

• Check that the supply voltage shown on

the rating plate of the appliance matches

that of your electrical system. Any

connection error will invalidate the

guarantee.

Mains plug replacement

If a new mains plug needs to be ﬁtted:

• Safely dispose of the old plug.

• Connect the brown lead to the live

terminal of the new plug.

• Connect the blue lead to the neutral

terminal.

• If the product is class l (earthed),

connect the green / yellow lead to the

earth terminal.

Warning! If your product is class ll

double insulated (only 2 wires in the

cord set), no connection is to be made to

the earth terminal.

Follow the ﬁtting instructions supplied with

good quality plugs

Any replacement fuse must be of the same

rating as the original fuse supplied with the

product.

Assembly

Warning! Before assembly, make

sure that the appliance is switched

o and unplugged.

Remove all packaging from the parts of the

appliance.

Clean the appliance before ﬁrst use.

ENGLISH

Blending and whisk attachment

• Use the blending attachment (4) for

blending liquids or mashing solids.

• Use the whisk attachment (6) and

beaters (7) for mixing, beating, whipping

and creaming liquids

Fitting and removing an

attachment

• Fit the motor body (1) into the beater

body (6) or blending attachment (4) and

rotate the motor unit clockwise to lock it

in place.

• Push the beaters (7) into the beater

body

• To remove the attachment, press the

motor unit lock button (8a) then rotate

the motor unit anti clockwise, and pull

the attachment from the motor unit

Use

Blending

• Place the ingredients into a measuring

jug or a suitable container.

• Using a stabbing motion, push the

blades into the ingredients until the

correct consistency is reached.

• When blending liquids or ﬂuid

ingredients, use short pulses to prevent

spillages.

• Keeping the blades submerged will help

to prevent spillages. Take extra care

when blending hot ingredients.

Chopping

• Fit the chopping blade (13) to the drive

spindle (12) and ﬁt the spindle over the

pin in the chopping bowl (11).

• Place the ingredients in the chopping

bowl.

• Fit the safety lid (9) on the bowl. The

tabs on the lid ﬁt into the recesses in the

bowl.

• Press the butttons (8b) and place the lid

(8) on the safety lid (9), pressing down

to lock it in place.

• Fit the motor unit (1) to the lid (8) &

rotate it clockwise to lock it in place.

• Chop the ingredients until the correct

consistency is reached. Additional

ingredients can be added through the

chute using the pusher.

• Once chopping is completed, unplug the

appliance & allow the blades to stop

moving.

• Press the motor unit button (8a) and

rotate the motor anti-clockwise to

remove. Press the bowl lid lock buttons

(8b) to remove the lid and safety lid.

• Carefully remove the drive spindle &

chopping blade before transferring the

ingredients to a suitable container.

• Do not operate when the appliance is

empty.

Shredding / Slicing

• Place the drive spindle (12) over the pin

in the bowl (11). Carefully ﬁt the required

blade (15 or 16) to the cutter disc (14)

and ﬁt the disc to the drive spindle

• Fit the safety lid (9) on the bowl. The

tabs on the lid ﬁt into the recesses in the

bowl.

• Press the buttons (8b) and place the lid

(8) on the safety lid (9), pressing down

to lock it in place.

ENGLISH

• Fit the motor unit (1) to the lid (8) &

rotate it clockwise to lock it in place

• Press the on/oﬀ (2) or turbo (3) button &

insert ingredients through the chute. The

pusher (17) can be used to guide

ingredients to the blade.

• Once shredding / slicing is completed,

unplug the appliance & allow the blades

to stop moving.

• Press the motor unit button (8a) and

rotate the motor unit anti-clockwise to

remove. Press the bowl lid lock buttons

(8b) to remove the lid and safety lid.

• Carefully remove the drive spindle &

chopping blade before transferring the

ingredients to a suitable container.

• Do not operate when the appliance is

empty.

Operating times and preparations

Switching on and o

Warning! Make sure your appliance

is switched o before connecting to

or disconnecting from the power supply.

Ensure that the voltage rating on the base

plate corresponds to the main voltage at

your home.

• To switch the appliance on, press the On

/ O button (1) or Turbo button (3)

• Keep the switch pressed for continuous

operation.

• To switch oﬀ, release the On / Oﬀ switch

(1) or Turbo button (3)

Warning! Do not operate the

appliance continuously for more

than 20 seconds. After operating the

appliance continuously for more than 20

seconds, let it cool down for at least 20

seconds before operating again.

Warning! This appliance is ﬁtted

with a safety cut-out. If the

appliance stops working during use, please

unplug it and allow to cool to room

temperature before trying again.

Warning! After switching oﬀ always

allow the motor to stop before

approaching the blade.

Maintenance

Your Black+Decker stick blender has been

designed to operate over a long period of

time with a minimum of maintenance.

Continuous satisfactory operation depends

upon proper care and regular cleaning.

Warning! Before performing any

maintenance or cleaning of the stick

blender, disconnect the appliance from the

power supply.

Ingredients Maximum Speed Time Blade

Quantities (Sec)

Onions (Cut in 8) 500g On/turbo 3-6 Chopping

Garlic (Cut in 8) 500g On/turbo 3-6 Chopping

Parsley 100g On/turbo 5-10 Chopping

Raw meat (fat free) 400g Turbo 10 Chopping

Nuts 300g On/turbo 5-10 Chopping

Fruits 700g Turbo 10 Chopping

Biscuit 300g On/turbo 5-10 Chopping

Carrots 400g On/turbo 5-10 Chopping

Carrots 400g On/turbo 5-10 Shredding

Radish 400g Turbo 5-10 Shredding

Potato 400g On/turbo 5-10 Slicing

Squash 800g On/turbo 5-10 Slicing

Cucumber 800g On 5-10 Slicing

Cleaning

Warning! Switch the appliance o

and unplug it before cleaning or

maintenance. Be careful when cleaning the

blades; they are sharp.

Warning! Do not immerse the

appliance, the cord set or the plug

in water or any other liquid.

• Wash the attachments in warm soapy

water and dry well.

• Wipe the motor unit (1) with a damp

cloth. Do not use any abrasive or

solvent-based cleaner.

Always clean the appliance immediately

after use. Do not let food dry on to the

blades as this will make cleaning dicult.

Note: Do not use abrasives or chemical

cleaners on any part of this appliance.

ENGLISH

Technical data

PRMP1000

Voltage 220 – 240 Volts

Supply 50 / 60 Hz

Power 1000 W

Net Weight 2.6 kg

Protecting the environment

Separate collection. This product must

not be disposed of with normal

household waste.

Should you ﬁnd one day that your

Black+Decker product needs replacement,

or if it is of no further use to you, do not

dispose of it with other household waste.

Make this product available for separate

collection.

• Black+Decker provides a facility for

recycling Black+Decker products once

they have reached the end of their

working life. This service is provided free

of charge. To take advantage of this

service please return your product to any

authorised repair agent who will collect

them on our behalf.

• You can check the location of your

nearest authorised repair agent by

contacting your local Black+Decker

oce at the address indicated in this

manual. Alternatively, a list of authorized

Black+Decker repair agents and full

details of our after-sales service and

contact are available on the Internet at:

www.2helpU.com.

ENGLISH

Warranty

Black+Decker is conﬁdent of the quality of

its products and oers an outstanding

warranty.

This warranty statement is in addition to and

in no way prejudices your statutory rights.

The warranty is valid within the territories of

the Member States of the European Union

and the European Free Trade Area.

If a Black+Decker product becomes

defective due to faulty materials,

workmanship or lack of conformity, within

24 months from the date of purchase,

Black+Decker warranty to replace defective

parts, repair products subjected to fair wear

and tear or replace such products to ensure

minimum inconvenience to the customer

unless:

The product has been used for

trade, professional or hire

purposes;

The product has been subjected to

misuse or neglect;

The product has sustained damage

through foreign objects,

substances or accidents;

Repairs have been attempted by

persons other than authorised

repair agents or Black+Decker

service sta.

To claim on the warranty, you will need to

submit proof of purchase to the seller or an

authorised repair agent. You can check the

location of your nearest authorised repair

agent by contacting your local

Black+Decker oce at the address

indicated in this manual.

Alternatively, a list of authorised

Black+Decker repair agents and full details

of our after-sales service and contacts are

available on the Internet at:

www.2helpU.com.

FRANÇAIS

1. Bloc moteur

2. Touche Marche / Arrêt

3. Touche Turbo

4. Pied de mixage

5. Récipient

6. Corps du batteur

7. Fouets

8. Couvercle du bol

8a. Touche de verrouillage du bloc moteur

8b. Touche de verrouillage du couvercle du bol

9. Couvercle de sécurité

10. Joint

11. Bol

12. Broche d’entraînement

13. Lame hachoir

14. Disque de coupe

15. Lame pour trancher

16. Lame pour broyer

17. Poussoir

13 15

Identiﬁcation des pièces

Tabla de contenidos

Idiomas:

Otros manuales de Licuadora de Black & Decker

Black & Decker

Black & Decker POWERCRUSH BL1300DG-T Manual de usuario

Black & Decker

Black & Decker 14600TB Instrucciones de instalación

Black & Decker

Black & Decker iBLEND BLP5601KT Instrucciones de instalación

Black & Decker

Black & Decker BISTRO BLD100 Series Manual del propietario

Black & Decker

Black & Decker PowerPro IB10 Series Instrucciones de instalación

Black & Decker

Black & Decker Cyclone BLC18750DMSUC Instrucciones de instalación

Black & Decker

Black & Decker BLD100 Series Instrucciones de instalación

Black & Decker

Black & Decker ProBlend BLKT5950C Manual de usuario

Black & Decker

Black & Decker HB24710-CL Instrucciones de instalación

Black & Decker

Black & Decker BL1400DG-P Manual de usuario

Black & Decker

Black & Decker PB1002 Manual de usuario

Black & Decker

Black & Decker Cyclone BLC12650H Instrucciones de instalación

Black & Decker

Black & Decker BLBD02LA Instrucciones de instalación

Black & Decker

Black & Decker BL2010BGC Manual de usuario

Black & Decker

Black & Decker BCKM101 Manual de usuario

Black & Decker

Black & Decker BX200 Manual de usuario

Black & Decker

Black & Decker BX380G Manual de usuario

Black & Decker

Black & Decker BX360 Manual de usuario

Black & Decker

Black & Decker fusionblade BL1800 series Manual de usuario

Black & Decker

Black & Decker BL4000R Manual de usuario

Black & Decker

Black & Decker ProBlend BL1900 Instrucciones de instalación

Black & Decker

Black & Decker BL1301DP Manual de usuario

Black & Decker

Black & Decker BL4001 Manual de usuario

Black & Decker

Black & Decker BLP7600BDC Instrucciones de instalación

Manuales populares de Licuadora de otras marcas

ROTOR

ROTOR 1125.201 Manual de usuario

Braun

Braun Multiquick 5 Vario series Manual de usuario

ARENDO

ARENDO MIRA 305424 Manual de usuario

CHEF-BUILT

CHEF-BUILT CCB-3500 Manual de usuario

Viconte

Viconte VC-4406 Manual de usuario

Oster

Oster BLSTAB-CB0 Manual de usuario

HOFFEN

HOFFEN MC-3005 Manual de usuario

Sunbeam

Sunbeam 4182 Manual de usuario

Bialetti

Bialetti FMX35 Manual de usuario

Duronic

Duronic BL530 Manual de usuario

Exquisit

Exquisit MS 3002 wes Manual de usuario

Lumme

Lumme LU-KP1891A Manual de usuario

Binatone

Binatone HB-735 Manual de usuario

Moulinex

Moulinex LM936E10 Manual de usuario

Oster

Oster VERSA Manual de instalación y operación

Ninja

Ninja NN210Q Manual de usuario

Vigan Mammoth

Vigan Mammoth TM4V1 Manual de usuario

Braun

Braun MR 4050 BC Manual de usuario