Bizfon 7000 Manual de usuario

Bizfon 7000

Installation Instructions

(for Revision 5.2)

Installation Instructions

50 Stiles Road • Salem, NH 03079 • Toll Free 1-800-260-5793 • 603-870-9400 • www.Bizfon.com

Revised: August 5, 2005 Page i

Table of Contents

1Installation Overview ...............................................................................................................................1

2Unpacking.................................................................................................................................................2

3Chassis Views..........................................................................................................................................3

4Mechanical................................................................................................................................................5

4.1 Tabletop or Shelf Placement ....................................................................................................................5

4.2 Rack Mount..............................................................................................................................................5

4.3 Wall Mount...............................................................................................................................................5

5Electrical...................................................................................................................................................7

5.1 Chassis Ground and Voltage Selection....................................................................................................7

5.2 Power-Up Sequence................................................................................................................................7

6Accessories..............................................................................................................................................8

6.1 Music-On-Hold .........................................................................................................................................8

6.2 Overhead Paging .....................................................................................................................................8

6.3 FAX Machine............................................................................................................................................8

7Telephony.................................................................................................................................................9

7.1 Analog......................................................................................................................................................9

7.2 SIP...........................................................................................................................................................9

8Server Configuration..............................................................................................................................10

9Data Network..........................................................................................................................................11

10 Configuration Example......................................................................................................................12

11 Physical and Environmental Specifications.....................................................................................13

12 Regulatory Notices.............................................................................................................................14

12.1 FCC Part 68 .........................................................................................................................................14

12.2 Industry Canada...................................................................................................................................14

12.3 Radio And Television Interference........................................................................................................15

Installation Instructions

50 Stiles Road • Salem, NH 03079 • Toll Free 1-800-260-5793 • 603-870-9400 • www.Bizfon.com

Revised: August 5, 2005 Page 1

1 Installation Overview

Installation of the Bizfon 7000 involves the following steps:

1. Unpacking

2. Mechanical Installation

3. Electrical Installation

4. Accessories Installation

5. Telephony Installation

6. Server Configuration

7. Network Installation

Each of these steps will be described in the following sections.

Installation Instructions

50 Stiles Road • Salem, NH 03079 • Toll Free 1-800-260-5793 • 603-870-9400 • www.Bizfon.com

Revised: August 5, 2005 Page 2

2 Unpacking

Open the box and carefully unpack it. Save all shipping and packaging materials. Verify all items against the

parts list shown in Table 1. If any items are missing, contact your dealer or Bizfon Customer Support at 866-

255-9679 - press 3.

Quantity Item

Bizfon Single-Disk 7000 Server

-OR-

Bizfon Mirrored-Disk 7000

Server

Accessory Kit containing:

•Power Cord

•Installation Instructions

•Software CD

•2 Mounting Brackets

•16 Mounting Screws

•4 Rubber Feet

Table 1: Parts List

Installation Instructions

50 Stiles Road • Salem, NH 03079 • Toll Free 1-800-260-5793 • 603-870-9400 • www.Bizfon.com

Revised: August 5, 2005 Page 3

3 Chassis Views

Figure 1: Front Chassis View

1 Power switch

Press & Release – Normal shutdown within a few seconds

Press & Hold – Forced shutdown

2 Front panel LEDs.

Power – Indicates system start up activity

Drive – Indicates drive activity

Alert – Indicates drive or other system fault condition

3 RJ-45 10BaseT/100BaseTX Auto-Sensing Auto-MDI/MDIX switched Local Area

Network Ethernet ports.

4 Safe Mode Reset Button

5 RJ-45 10BaseT/100BaseTX Auto-Sensing Auto-MDI/MDIX Wide Area Network

port.

6 RJ-11 Power Fail analog phone connector

7 RJ-11 dedicated loop-start FXO ports for central office connection (Ports 1-3)

8 RJ-11 loop-start FXO for central office connection or FXS universal telephone

auto-sensing ports for analog extension connection (Ports 4-9)

9 RJ-11 FXS ports for analog or fax extension (Ports 10-16)

10 3.5 mm stereo audio mini jacks for music-on-hold and overhead paging

298

5 6

Installation Instructions

50 Stiles Road • Salem, NH 03079 • Toll Free 1-800-260-5793 • 603-870-9400 • www.Bizfon.com

Revised: August 5, 2005 Page 4

Figure 2: Rear Chassis View

11 Exhaust fan cover

12 Power cord connector

13 Voltage selection switch

14 Permanent ground connecting screw

15 Air intake and exhaust vents

11 15

12 13 14

Installation Instructions

50 Stiles Road • Salem, NH 03079 • Toll Free 1-800-260-5793 • 603-870-9400 • www.Bizfon.com

Revised: August 5, 2005 Page 5

4 Mechanical

4.1 Tabletop or Shelf Placement

To install the Bizfon 7000 on a tabletop or shelf:

1. Remove the four rubber feet from the Accessory Kit.

2. Turn over the chassis and notice the circles on each corner.

3. Remove the paper backing from each rubber foot and place one foot in each circle.

4.2 Rack Mount

To install the Bizfon 7000 in a standard 19 inch equipment rack:

1. Remove the two brackets and associated screws from the Accessory Kit.

2. Place the brackets so that the smaller faces extend away from the front of the unit as shown in Figure 3.

Figure 3: Rack Mount Bracket Installation

3. Install the mounting brackets on each side of the chassis using four 8-32 flat head screws.

4. Perform the electrical installation as shown in the instructions below before placing the chassis into the

rack.

4.3 Wall Mount

To mount the Bizfon 7000 on a wall:

1. Verify that there is sufficient clearance around the server’s front and rear panels to allow power, network,

and telephony connections.

2. Remove the two brackets and associated screws from the Accessory Kit.

3. Place the brackets so that the smaller faces extend away from the bottom of the unit as shown in Figure 4.

Installation Instructions

50 Stiles Road • Salem, NH 03079 • Toll Free 1-800-260-5793 • 603-870-9400 • www.Bizfon.com

Revised: August 5, 2005 Page 6

Figure 4: Wall Mount Bracket Installation

4. Install the mounting brackets on each side of the chassis using four 8-32 flat head screws.

5. Secure the unit to the wall using appropriate hardware.

Caution: The Bizfon server must be securely mounted to the wall to avoid equipment damage or

personal injury.

Installation Instructions

50 Stiles Road • Salem, NH 03079 • Toll Free 1-800-260-5793 • 603-870-9400 • www.Bizfon.com

Revised: August 5, 2005 Page 7

5 Electrical

5.1 Chassis Ground and Voltage Selection

Connect the chassis to earth ground using 18 AWG (or larger) wire from the chassis ground screw located next

to the power receptacle on the rear panel as shown in Figure 5.

Figure 5: Ground Connection and Voltage Selection

Be sure the voltage switch on the rear of the unit is set to the appropriate setting for your location. The unit is

shipped in the United States with the switch set to 115 VAC.

Caution: Failure to follow these steps may result in equipment damage, personal injury, and void the

product warranty.

5.2 Power-Up Sequence

Connect the unit to the power source with the AC power cable. The server will automatically begin to power

up. As it progresses through the power up sequence, the front panel lights will respond as shown in Table 2.

Front Panel Light Power-Up Sequence Description

Power Flashes as the power up sequence progresses,

then lights steady green when the unit is ready.

Drive Flashes as the power up sequence progresses.

Alert Lights orange momentarily, then goes off.

Table 2: Front Panel Lights During Power-Up Sequence

oltage setting switch Ground connecting screw

Installation Instructions

50 Stiles Road • Salem, NH 03079 • Toll Free 1-800-260-5793 • 603-870-9400 • www.Bizfon.com

Revised: August 5, 2005 Page 8

6 Accessories

6.1 Music-On-Hold

Connect the output from your music system to the server using a 3.5mm stereo plug line-in audio adapter

cable. Insert the male cable end into the audio connector labeled “In” on the front panel. Only the audio

channel associated with the tip of the plug is used.

6.2 Overhead Paging

Connect the server to the input of your paging system using a 3.5mm stereo plug audio cable. Insert the male

cable end into the audio connector labeled “Out” on the front panel.

6.3 FAX Machine

To enable the sharing of a CO line between a fax machine and outgoing calls, a fax machine may be directly

connected to the server on any of the phone extension ports. Just as when connecting an analog phone, this

requires configuring the extension using the administrative interface. See the Call Routing section of the

Bizfon 7000 System Administration Guide for instructions. If you have a high volume of fax traffic, it may be

prudent to connect the CO line directly to the fax machine via the premise wiring.

Otros manuales para 7000

Tabla de contenidos

Otros manuales de Hardware de computadora de Bizfon

Bizfon

Bizfon 4000 Manual de usuario

Bizfon

Bizfon 2000 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario