2. Press and hold the power button for 3 seconds to turn on the dashcam, and it will
vibrate once.
3. When the dashcam is turned on, the recording light (white light) remains on, and it will
automatically enter the recording mode. The white light will flash during recording.
4. Press the power button once to stop recording and it will vibrate once, at the same
time the white light remains on; press the power button again to restart the recording
and it will vibrate, then the white light flashing resumes.
5. When the dashcam is turned on, double tap the power button twice to turn on the WIFI.
When the WIFI starts, the blue WIFI indicator light will flash, but if it is not connected to
the phone within 1 minute, WIFI will automatically turn off. If the connection with the
mobile phone is successful, the blue WIFI indicator light will remain on.
a. Note: If keep the WIFI on before turning off the dashcam, then next time the WIFI
will be automatically on while turning on the dashcam.
6. Press and hold the power button for 3 seconds to turn off the dashcam, and it will
vibrate twice.
7. If the dashcam detects there is no memory card or card reading error… etc., it will
vibrate three times and the 3 lights will flash to warn the user.
Low-power Alarm
The battery light (green light) shows the dashcam battery status.
Green light remains on：battery power is more than 50%.
Green light slow flashes：battery power 30%-50%.
Green light quick flashes：battery power is less than 30%.
