BIRO AFMG-52 Manual de servicio
PTCT
AFMG-52
232-6-10-13
STANDARD AND OPTIONAL
STAINLESS STEEL BOWLS, AUGERS & END RINGS
(130mm UNGER & ENTERPRISE) ..............................................18
PRODUCT MIXER SAFTY COVERS & LID LOCKS................................19
- NOTE -
A copy of this manual is included with each AFMG-52 MIXER GRINDER.
The descriptions and illustrations contained in this manual are not binding. The
manufacturer reserves the right to introduce any modification without
updating the manual.
1
CLEANING THE BOWL - RING AND WORM
CARE OF TIN COATED PRODUCTS
(DO’S AND DON’TS)
1. Do not use abrasive cleaning materials, such as Brillo pads or metal scrapers. Tin is a soft metal and should be cleaned
with a soft cloth and dried.
2. Do not use a cleaning agent containing a high percentage of free alkali or acid.
3. Do not use detergent containing a high percentage of tri-sodium phosphate or meta-silicate. Tin is reactive to both.
4. Rinse well and dry thoroughly after washing to remove agents that may be reactive to tin.
5. If sterilizing agent containing chlorine is used, the tinned surface must be thoroughly rinsed. Chlorine is corrosive to tin.
6. Dry thoroughly after rinsing and store in a dry environment.
7. If water is exceptionally hard, drying will be necessary to prevent spotting.
Otros manuales para AFMG-52
1
Otros manuales de Amoladora de BIRO
BIRO
BIRO AFMG-52 Manual de servicio
BIRO
BIRO MINI-22 Manual de usuario
BIRO
BIRO AFMG-48-II Manual de servicio
BIRO
BIRO AFMG-48-II Manual de servicio
BIRO
BIRO Mini-32 Manual de servicio
BIRO
BIRO 8-12 Manual de operación
BIRO
BIRO EMG-32 Manual de usuario
BIRO
BIRO AFMG-48-II Manual de servicio
BIRO
BIRO Mini-32 Manual de servicio
BIRO
BIRO 922 Manual de instrucciones
