BestScope International Limited
Attentions！！
1) Purpose
The series microscopes are used only for microscopic observation, not for other purpose, otherwise
may cause damage.
2) Disassembled only by the professionals
The microscopes have been adjusted before shipping, Unprofessional-person should not disassemble
and remove any parts.
3) The proper usage
Power supply voltage must be consistent with the input voltage marked in the microscope. If beyond
this range, equipment will be seriously damaged. Microscope is a precision instrument and should be
operated carefully, operators should comply with appropriate safety procedures and assume
responsibility for the safe use of this instrument.
4) Use in safe way, prevent burns and fire
When the illumination is on, temperature of bulb and collector will rise sharply, so pay attention to
anti-hot logo, to prevent burns.
Do not use alcohol, gasoline, paper and other combustibles near the instrument, to prevent a fire! !
5) Notes on replacing the bulb
The correct bulb must be used as the same specification of the bulb in the microscope. Use of other
bulbs may damage the equipment. Before replacing the lamp, must turn off power switch, and
unplug it in order to avoid electric shock and damage to equipment. When replacing the lamp, be
careful not to pollution bulb. The bulb shouldn’t have dust , fingerprints, oil, etc..
The power supply must be cut off before bulb replacement. The bulb must be cooled down
completely before proceeding! !
6) Requirements for handling and using environment
Power must be cut off before moving. Be careful not to crush your finger when placed.
This instrument is a precision instrument, and it should be handle withcare, severe shock cancause
serious damage to equipment-related parts.
The required available environment for using of the equipment:
Indoor temperature: 0 ℃~ 40 ℃
Maximum relative humidity: 95%
High temperature or high humidity may cause mildew, fog or dew of the optical components.
7) For the protection of the environment, please properly handle the microscope packing waste (such
as: cardboard, foam, etc.)
8) Statement
Our company reserves the right to improve product design and outfits.
