Biostar U8598 Manual de usuario

FCC Information and Copyright

This equipment has been tested and found to comply with the

limits of a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. There is no guarantee that interference will not

occur in a particular installation.

The vendor makes no representations or warranties with respect

to the contents here of and specially disclaims any implied

warranties of merchantability or fitness for any purpose. Further

the vendor reserves the right to revise this publication and to

make changes to the contents here of without obligation to notify

any party beforehand.

Duplication of this publication, in part or in whole, is not allowed

without first obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without

notice and we will not be responsible for any mistakes found in

this user’s manual. All the brand and product names are

trademarks of their respective companies.

Table of Contents

Notice .............................................................................................1

Mainboard Features...............................................................2

1. Features Introduction......................................................................... 2

1-1. Hardware.........................................................................................................2

1-2. BIOS & Software.........................................................................................8

1-3. Package Contents.......................................................................................8

2. Mainboard Configuration................................................................... 9

2-1. Layout of U8598..........................................................................................9

2-2. Component Index.....................................................................................10

3. CPU Configuration ............................................................................. 11

3-1. CPU Socket 478 Configuration Steps:...........................................11

3-2. CPU Fan Header: JCFAN1.....................................................................13

3-3. System Fan Header: JSFAN1.............................................................13

4. Jumpers, Headers & Connectors.................................................. 14

4-1. Front Panel Connector: JPANEL1......................................................15

4-2. ATX 20-pin Power Connector: JATXPWR1...................................17

4-3. ATX 12V Power Connector: JATXPWR2........................................17

4-4. Hard Disk Connectors: IDE1/IDE2/IDE3......................................18

4-5. Floppy Disk Connector: FDD1............................................................18

4-6. Wake On LAN Header: JWOL1...........................................................19

4-7. Clear CMOS Jumper: JCMOS1...........................................................19

4-8. Front USB Header: JUSB3....................................................................20

4-9. Front USB Header: JUSB2....................................................................20

Table of Contents

4-10. DDR DIMM Voltage: JDIMMVOLT (Optional)...........................20

4-11. AUX Power Connector: JAUXPWR1..............................................21

4-12. Front 1394 Header: J1394A1(Optional)....................................21

4-13. Front 1394 Header: J1394B1(Optional)....................................21

4-14. Front 1394 Header: J1394C1(Optional)....................................21

4-15. Aux Audio in Connector: JAUX1 (Optional)..............................22

4-16. Serial ATA Connector: JSATA1/ JSATA2 (Optional).............22

5. RAM Module Configuration............................................................. 23

5-1. DDR SDRAM................................................................................................23

5-2. DIMM Module Configuration................................................................24

6. Peripheral Port Features ................................................................. 25

6-1. PS/2 Mouse / Keyboard Connector: JKBMS1.............................25

6-2. USB & LAN Port Connectors: JUSBLAN1......................................26

6-3. Serial and Parallel Interface Ports....................................................28

6-4. Game (Joystick/MIDI) Port Connector: JGAME1......................30

6-5. Audio Port Connectors: JSPKR1/JLIN1/JMIC1...........................30

6-6. Audio Subsystem......................................................................................32

Serial ATA Chip - FastTrak 376.....................................35

Step 1: Installing the Hard Drives..............................................................35

Step 2: Auto Setup FastBuild™ Configuration Utility.......................36

Step 3: Installing Software Drivers...........................................................42

Step 4: Install PAM Utility...............................................................................49

Using FastBuild™ Configuration Utility.....................................................55

MainboardFeatures

Notice

Introduction of system

This mainboard is designed to take advantage of the latest industry

technology to provide you with the ultimate solution in data

processing. In the tradition of its predecessors, this mainboard

continues a commitment to reliability and performance and strives

for full compliance and compatibility with industry software and

hardware standards.

U8598 Features:

1.Contains on board I/O facilities that include two serial ports, a parallel

port, a PS/2 mouse port, a PS/2 keyboard port, audio ports, LAN

port and a game port.

2.Contains on board IDE facilities for IDE devices such as hard disks

and CD-ROM Drives.

3.Supports the Intel Pentium ® 4 processor, a leading edge processor.

Complies with PC ATX form factor specifications.

MainboardFeatures

Mainboard Features

1. Features Introduction

1-1. Hardware

CPU:

1.Provides Socket-478.

2.Supports the Intel Pentium ® 4processor providing the new generation power

for high-end workstations and servers.

Speed:

1.Runing at 400/533 MHz Front Side Bus frequency.

2.Supports up to 2.8 GHz CPU core speeds.

3.The 33MHz 32 bit PCI 2.2 compliant.

4.The 66MHz AGP 2.0 compliant interface supports 1x, 2x, 4x and 8x data

transfer mode (only with 1.5V).

Chipset:

1.Chipset – VIA VT8754 (P4X400)/ VT8235.

2.I/O Chip – Winbond W83697HF.

DRAM Memory:

1.Supports 266MHz, 333MHz and 400MHz DDR devices.

2.Supports 64Mb, 128Mb, 256Mb, 512Mb and 1G technologies for x8 and 16

devices.

3.Max of 3 Double-Sided DDR with unbuffered / Registered (with ECC).

4.The largest memory capacity is 12 GB.

MainboardFeatures

Shadow RAM:

Motherboard is equipped with a memory controller providing shadow RAM and

support for ROM BIOS.

Green Functionality:

1.Supports Award BIOS ™ power management functionality.

2.Has a power down timer from 1 to 15 minutes.

3.Wakes from power saving sleep mode with any keyboard or mouse activity.

BUS Slots:

1.Contains 1 AGP slot.

2.Contains 1 CNR slot.

3.Contains 5 32-bit PCI bus slots.

Flash Memory:

1.Supports flash memory functionality.

2.Supports ESCD functionality.

Built in IDE Facilities:

1.Dual channel master mode hard disk controller supporting four Enhanced

IDE devices.

2.Transfer rate up to 133MB/sec to cover PIO mode 4,multi-word DMA mode 2

drives,and UltraDMA-133 interface.

3.Increased reliability using UltraDMA-133/100/66 transfer protocols.

4.Thirty-two levels (doublewords)of prefetch and write buffers.

5.Dual DMA engine for concurrent dual channel operation.

6.Bus master programming interface for SFF-8038i rev.1.0 and Windows-95

compliant.

7.Full scatter gather capability.

8.Support ATAPI compliant devices including DVD devices.

9.Support PCI native and ATA compatibility modes.

10. Complete software driver support.

MainboardFeatures

AC’97 Sound Codec Onboard:

1. AC-LINK protocol comfliance.

2.Compliant with AC’97 specification.

3.18-bit full duplex stereo ADC, DACs.

4.SNR>95 Bb throughmixer and DAC.

5. Full-duplex codec.

6. Earphone buffer.

7. Line in/ Rear out share jack capability.

8. Mic in/ Center and Bass out share jack capability.

9. Internal PLL built-in saving additional crystal.

10. Meet Microsoft’s ® PC2001 requirements.

11. Support 6-CH speaker mode.

I/O facilities:

1.One multi-mode Parallel Port capable of supporting the following

specifications:

Standard & Bidirection Parallel Port.

Enhanced Parallel Port (EPP).

Extended Capabilities Port (ECP).

Normal

2.Supports two serial ports, 16550 UART.

3.Supports Infrared Data Transmission using IrDA.

4.Supports PS/2 mouse and PS/2 keyboard.

5.Supports 360KB, 720KB, 1.2MB, 1.44MB, and 2.88MB floppy disk drives.

Universal Serial Bus:

1.Supports two back panel Universal Serial Bus Ports and two front panel

Universal Serial Bus Ports.

2.Supports 480 Mb Transfer Speed USB (2.0).

MainboardFeatures

Hardware Monitor Function:

1.Monitors CPU Fan Speed.

2.Monitors System Voltage.

3.System Fan Speed.

4.CPU Temperature.

1394 Function (Optional)

Embedded 1394 Link Core

1.32 bit CRC generator and checker for receive and transmit data.

2.On-chip isochronous and asynchronous receive and transmit FIFO’s for

packers (2K for general receive plus 2K for isochronous transmit plus 2K for

asynchronous transmit).

3.8 isochronous transmit/ receive contexts

4.3-deep physical post-write queue

5.2-deep physical response queue.

6.Dual buffer mode enhancements.

7.Skip Processing enhancements

8.Block Read Request handling

9.Ack_tardy processing.

OHCI Compliant Programming Interface

1.Compliant with 1394 Open HCI Specifications v1.0 and v1.1.

2.Descriptor based isochronous and asynchronous DMA channels for receive/

transmit packets.

32-Bit Power-Managed PCI Bus Interface

1.Compliant with PCI Bus Power Management Specifications v1.1/

2.Supports power states D0, D1, D2, D3hot, and D3cold.

Integrated 400 Mbit 3-Port PHY

1.Supports provisions of IEEE 1394-1995 Standard for High

Performance Serial Bus and the P1394a Supplement 4.0.

2.Fully interoperable with IEEE Std 1394-1995 devices.

3.Full P1394a Supplement Support includes:

＊

Arbitrated short reset

＊

Enhanced priority arbitration

＊

Connection debounce

MainboardFeatures

＊

Multispeed packet concatenation

＊

Ack accelerated arbitration

＊

Fly-by concatenation

＊

Per port disabled, suspend, resume, through register write and

remote command packet

＊

Remote access packet

＊

Boundary node short reset

＊

No phy_ID wrap past 63

4.Provides three 1394a fully compliant cable ports at 100/200/400 Mbit

second.

5.Host notification of PHY LinkOn events.

6.Logic performs bus initialization and arbitration functions.

7.Incoming data resynchronized to local clock.

8.24.576 MHz crystal oscillator and PLL provide TX/RX data at

100/200/400 Mbps and Link-Layer Controller clock at 49.152 MHz.

9.Cable power presence monitoring.

10.Programmable node power class information for system power

management.

11.Fully Compliant P1394a 4.0 PHY register map.

12.Separate TPBIAS for each port.

13.Cable ports monitoring line conditions for active connection to

remote node.

14.Automatic power down inactive circuit and logic for low power

application

15.Self power up and pinless PLL to reduce passive component counts

on system.

16.Automatic configuration to single-port, two-port, and three-port

applications; unused ports power down automatically.

17.Dedicated power supply pins separate from link core.

Serial ATA Function (Optional)

General

1.Built in 2 channels SATA PHY, which satisfy SATA 1.0 specification and can

transfer data with 1.5GHz speed.

2.Additional one parallel ATA interface which satisfy ATA 133 specification.

MainboardFeatures

3.Bus mastering design takes full advantage of multi-tasking, multi-threading

operating systems and greatly improves performance.

4.Provides Memory Mapped-I/O programming interface to improve command

setting up performance, and that can be applied to some platforms even which

without I/O space addressing capability.

Raid Engine

1.Provides advance chained packet commands for independent ATA

operations.

2.Allows software mechanism to implement ATA elevator sorting algorithm on

H/W command queue.

ATA Interface

1.Compatible with the latest PCI IDE, ATA 7 and enhanced IDE specifications.

2.Supports ATA proporsal PIO Mode 0, 1, 2, 3, 4, Ultra DMA Mode 0, 1, 2, 3,

4, 5, 6. The IDE drive transfer rate is capable of up to 150 MB/sec.

3.Automatically detects whether or not the cable is suitable for mode 3, 4, 5, 6

of Ultra DMA.

4.Independent access timing for Task-register and data register for four drives.

5.Both of hardware and software can set access timing for data transfer.

Timing parameter for PIO, DMA & UDMA, optimize for 150 MHz clock, can be

set to timing register automatically after “Set Feature Command” when the

corresponding sub-command is “Set Transfer Mode”.

SATA Interface

1.Integrated four 1.5 GHz PHY which satisfy SATA 1st generation specification.

2.High signal quality, excellent compatibility with SATA hard drive.

3.Support SATA power save mode.

4.Support plug and play operation and can generate interrupt for software

handling.

Dimensions (ATX form-factor):

24.5cm x 30.5cm (WxL)

Otros manuales para U8598

Tabla de contenidos

Otros manuales de Placa madre de Biostar

Biostar

Biostar TH55 HD - BIOS Manual de usuario

Biostar

Biostar A85W 3D Manual de usuario

Biostar

Biostar P4M890-M7 SE Manual de usuario

Biostar

Biostar P4TSG PRO Manual de usuario

Biostar

Biostar I86PE-A4 Guía del usuario

Biostar

Biostar M7IZ400 Manual de usuario

Biostar

Biostar H55 HD Guía del usuario

Biostar

Biostar A10N-9830E Manual de usuario

Biostar

Biostar A58MDP Guía del usuario

Biostar

Biostar TP45E Combo Guía del usuario

Biostar

Biostar TB150 PRO Manual de usuario

Biostar

Biostar B365GTQ Manual de usuario

Biostar

Biostar TFORCE 945P Manual de usuario

Biostar

Biostar BI94GS-IA Guía del usuario

Biostar

Biostar GAMING Z170X Manual de usuario

Biostar

Biostar TP35D2-A7 SE Guía del usuario

Biostar

Biostar A780L Guía del usuario

Biostar

Biostar M5SAA Manual de usuario

Biostar

Biostar TFORCE 550 Manual de usuario

Biostar

Biostar B150GT3 Manual de usuario

Biostar

Biostar M7VIT Pro Instrucciones de funcionamiento e instalación

Biostar

Biostar H110MDE Manual de usuario

Biostar

Biostar BIPV10-IAT Guía del usuario

Biostar

Biostar M7NCD Ultra Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario