Biostar BIPV10-IAT Guía del usuario

BIPV10-IAT Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the

contents here and specially disclaims any implied warranties of merchantability

or fitness for any purpose. Further the vendor reserves the right to revise this

publication and to make changes to the contents here without obligation to

notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be responsible for any mistakes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction ........................................ 3

1.1 Before You Start ................................................................................ 3

1.2 Package Checklist............................................................................. 3

1.3 Mainboard Specification................................................................... 4

1.4 Rear Panel.......................................................................................... 5

1.5 Mainboard Layout ............................................................................ 6

Chapter 2: Installation.......................................... 7

2.1 CPU...................................................................................................... 7

2.2 Fan Header......................................................................................... 7

2.3 System Memory.................................................................................. 8

2.4 Power Supply ..................................................................................... 9

2.5 Onboard Slot/Connector/Header/Jumper.................................... 10

Chapter 3: BIOS Setup ........................................ 18

3.1 Main Menu........................................................................................ 20

3.2 Advanced Menu............................................................................... 23

3.3 PCI/PnP Menu.................................................................................. 33

3.4 Boot Menu ........................................................................................ 36

3.5 Chipset Menu.................................................................................... 38

3.6 Exit Menu.......................................................................................... 45

Chapter 4: Useful Help ........................................ 48

4.1 Driver Installation Note.................................................................. 48

4.2 AMI BIOS Beep Code....................................................................... 49

4.3 Troubleshooting............................................................................... 50

BIPV10-IAT

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Thank you for choosing our product. Before you start installing the

mainboard, please make sure you follow the instructions below:

Prepare a dry and stable working environment with

sufficient lighting.

Always disconnect the system from power outlet

before operation.

Before you take the mainboard out from anti-static

bag, ground yourself properly by touching any safely

grounded appliance, or use grounded wrist strap to

remove the static charge.

Avoid touching the components on mainboard or the

rear side of the board unless necessary. Hold the board

on the edge, do not try to bend or flex the board.

Do not leave any unfastened small parts inside the

case after installation. Loose parts will cause short

circuits which may damage the equipment.

Keep the system from dangerous area, such as heat

source, humid air, and water.

Please switch on/off the machine normally. That is, DO

NOT pull out power cord directly from the mainboard

or the system may damage.

1.2 PACKAGE CHECKLIST

Mini-ITX Mainboard x 1

Fully Setup Driver CD x 1

I/O Bracket x 1

SATA Cable x 1 (Optional)

Mini-ITX Mainboard Manual

1.3 MAINBOARD SPECIFICATION

Specif ica tio n

CPU

Intel Atom CPU On-board

D425 @1.8GHz (TDP 10W)

Pineview-D Processor

Optional for:

N455 @1.66GHz (TDP 6.5W)

N550 dual core @1.5GHz (TDP 8.5W)

D525 dual core @ 1.8GHz (TDP 13W)

FSB Supports up 800 MHz

Chipset Intel N M10 Ex press Chipset

Graphic Intel Pineview-D integrated graphics engine

Max Shared Video Memory is 384 MB

-- integrated VGA support up to SXGA+

1400x1050

-- DVI-I ( by Chrontel CH7036, scale up to

1600x1200)

Super I/O

ITE IT8728

Provides the most commonly used legacy

Super I/O functionality.

128pin type

Environment C ontrol in it iat ives ,

H/W Monitor

Fan Speed Controller

Main

Memory

SO-DIMM (204pin) Slot x 2

Supports DDR3 800 MHz

DIMM supports 512MB / 1GB / 2GB / 4GB

Max Memo ry Capac ity 4GB

Registered DIMM or ECC DIMM is not

supported

*N455/N550 only support up to 2GB

SATA Chipset built- in Serial ATA controller

SATA Vers ion 2.0 specification compliant

Data transfer rates up to 3.0 Gb/s

LAN Realtek RTL 8111E x2

10 / 100 / 1000 Mb/s auto negotiation

Ha lf / Fu ll d up lex capability

Sound

Codec Realtek ALC662

5.1 channels audio out (only for x3 audio

jack version)

High-Defin ition Audio s uppo rt

PCI slot x1

PCI Express x1 Slot x1

Slot

Mini PCI-E Slot x1

SATA2 Connector x2

Power Connector for SATA x1

On Board

Connectors

& Headers Front Panel Header x1

BIPV10-IAT

Specif ica tio n

Parallel Connector x1

Digital I/O Connector x1

System Fan Header x2

Clear CMOS Header x1

AT/ATX Power Switch Header x1

USB 2.0 Connector x2 support 3 devices

Front Audio Connector x1

Power Connector (4pin) x1

Back Panel

I/O

PS/2 Keyboard x1

PS/2 Mouse x1

Serial Connector x2

VGA Port x1

DVI Port x1

LAN port x2

USB Port x4

Audio Jack (Line-out/Mic) x2

(RS232, pin #9 with ring/5V)

(Gigab it LAN)

Optional for x 3 (Line- in/Line- out/Mic)

Board Size

170 mm (W) x 170 mm (L) Mini-ITX

Support Windows XP/XPE, Linux

Biostar reserves the right to add or remove

support for any OS with or without notice.

1.4 REAR PANEL

PS/2

Mouse

PS/2

Keyboard

LAN

USB 2.0 x 4

LANDV I-I Po rt

VGA Port JCOM1A

JCOM1B

Mic In

(Center/SUB)

Li ne O u t

(F r on t )

Mini-ITX Mainboard Manual

1.5 MAINBOARD LAYOUT

JKB MS1

JRJ45USB 1

JRJ45USB 2

VGA_DVI1

JCOM1

JAUDIO1

BAT1

JCFAN1

JP WR1

JAT1

JPRNT1

JPC2

JP C1

JDIO1

SATA2

SATA1

JUSB 1

JPA NEL1

BIOS

JSFAN1 JHDD 1

JCMOS1

JUSB 2

PCI1

PEX1_1

DIMM A1

DIMM A2

Intel

Atom

CPU

CU1

NM10

PE1

F_AUD IO1

Note: represents the 1■st pin.

BIPV10-IAT

CHAPTER 2: INSTALLATION

2.1 CPU

The mainboard includes an embedded Intel Atom N455/N550/D525/D425

processor, and a heatsink has been installed to provide sufficient cooling.

2.2 FAN HEADER

The fan header supports cooling-fans built in the system. The fan cable

and connector may be different due to the fan manufacturer.

JCFAN1: CPU Fan Header

Pin Assignment

1 Ground

2 +12V Smart

Fan Control (By

Fan)

3 FAN RPM rate

sense

JSFAN1: System Fan Header

Pin Assignment

1 Ground

2 +12V

3 FAN RPM rate

sense

Note:

CPU Fan & System Fan Header support 3-pin head connectors. When connecting with

wires onto connectors, please note that the red wire is the positive and should be

connected to pin#2, and the black wire is Ground and should be connected to GND.

Mini-ITX Mainboard Manual

2.3 SYSTEM MEMORY

DIMMA1/DIMMA2: Memory Module (204pin SO-DIMM)

DIMMA2

DIMMA1

2 Align a DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

3 Insert the DIMM firmly into the slot until the retaining chip snap back in

place and the DIMM is properly seated.

Memory Capacity

DIMM Socket Location DDR3 Module Total Memory Size

DIMMA1 512MB/1GB/2GB/4GB

DIMMA2 512MB/1GB/2GB/4GB

Max is 4GB.

BIPV10-IAT

2.4 POWER SUPPLY

JPWR1: ATX Power Source Connector (4-pin)

This connector provides +12V to system power circuit.

Assignment

1 +12V

2 +12V

3 Ground

4 Ground

JHDD1: SATA Power Connector

This connector provides power connection of SATA devices.

Pin Assignment

1 +12V

2 GND

3 +3.3V

4 +5V

1 4

Mini-ITX Mainboard Manual

2.5 ONBOARD SLOT/CONNECTOR/HEADER/JUMPER

PCI1: Peripheral Component Interconnect Slot

This mainboard is equipped with 1 standard PCI slot. PCI stands for Peripheral

Component Interconnect, and it is a bus standard for expansion cards. This PCI

slot is designated as 32 bits.

PCI1

PE1: Mini PCI-E Slot

This mainboard is equipped with 1 Mini PCI-E Slot.

Tabla de contenidos

Otros manuales de Placa madre de Biostar

Biostar

Biostar TPOWER I55 Guía del usuario

Biostar

Biostar M6TZK Manual de usuario

Biostar

Biostar B660MX2-E Manual de usuario

Biostar

Biostar H310MHP Manual de usuario

Biostar

Biostar NF4 AM2G Guía del usuario

Biostar

Biostar B660MXC PRO Manual de usuario

Biostar

Biostar A10N-9830E Manual de usuario

Biostar

Biostar G31-M4 Manual de usuario

Biostar

Biostar 945P-A7B Guía del usuario

Biostar

Biostar P4 VTG Manual de usuario

Biostar

Biostar H510MHP 2.0 Manual de usuario

Biostar

Biostar BI94GS-IAC Guía del usuario

Biostar

Biostar U8068 Manual de usuario

Biostar

Biostar G31-M7G DVI Guía del usuario

Biostar

Biostar P4 TSV Guía del usuario

Biostar

Biostar M6TEA Manual de usuario

Biostar

Biostar B350GTX Manual de usuario

Biostar

Biostar TA75A+ Guía del usuario

Biostar

Biostar K8VHA-M Manual de usuario

Biostar

Biostar P4 TDQ Instrucciones de funcionamiento e instalación

Biostar

Biostar NF520-A2 TE - BIOS SETUP Guía del usuario

Biostar

Biostar M7SXD Manual de usuario

Biostar

Biostar TA785G3 HD - BIOS Guía del usuario

Biostar

Biostar H81MHV3 3.0 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario