Biostar M7TDB Manual de usuario

M7TDB

Federal Communications Commission

(F.C.C.) Statement

This device complies with Part 15 of the FCC Rules. Operation of this device is

subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Accessories: This device has been tested and found to comply with the limits of a

Class B digital device, the accessories associated with this equipment are as

follows:

1. Shielded serial cable. (Can be obtained from multiple retail outlets)

2. Shielded printer cable. (Can be obtained from multiple retail outlets)

3. Shielded video cable. (Can be obtained from multiple retail outlets)

4. Shielded power cord. (Provided by manufacturer)

These accessories are required to ensure compliance with FCC Rules. It is the

responsibility of the user to provide and use these accessories properly.

This equipment has been tested and found to comply with the limits of a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, you are encouraged to try to correct the

interference by one or more of the following measures:

1. Reorient / relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment.

Disclaimer

The vendor makes no representations or warranties with respect to the contents

here of and specially disclaims any implied warranties of merchantability or

fitness for any purpose. Further the vendor reserves the right to revise this

publication and to make changes to the contents here of without obligation to

notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

Trademarks and Remarks

MS-DOS, Windows, Windows NT, Windows 9X, Windows ME, Windows XP

and Windows 2000 are products of Microsoft Corp, with its ownership of

trademark, and are distributed by the vendor under a license agreement.

All trademarks used in this manual are the property of their respective owners.

Canadian D.O.C. Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus as set out in the radio interference regulations of the

Canadian Department of Communications.

Cet appareil numbérique n‘émet pas de bruits radioélectriques dépassant les

limites appliquées aux appareils numbériques de Class B préscrits dans le

réglement du brouillage radioélectrique edict par le minister Des Communications

du Canada.

Contents

Introduction ..................................................................................1-1

1. Motherboard Description........................................................1-2

1.1 Features...................................................................................................1-2

1.1.1 Hardware...........................................................................................................1-2

1.1.2 BIOS.................................................................................................................1-7

1.1.3 Software............................................................................................................1-7

1.1.4 Accessories.......................................................................................................1-7

1.2 Motherboard Installation.........................................................................1-8

1.2.1 System Block Diagram....................................................................................1-8

1.2.2 Layout of Motherboard....................................................................................1-9

1.2.3 Quick Reference.............................................................................................1-10

1.3 CPU Installation....................................................................................1-11

1.3.1 CPU Installation Procedure: Socket 478......................................................1-11

1.3.2 CPUFan Header: JCFAN1...........................................................................1-12

1.3.3 System Fan Header: JSFAN1.......................................................................1-12

1.4 RAM Module Installation.....................................................................1-13

1.4.1 DIMM.............................................................................................................1-13

1.4.2 Howto install a DIMM Module...................................................................1-15

1.5 Slots ......................................................................................................1-16

1.5.1 AGP (Accelerated Graphics Port) Slot.........................................................1-17

1.5.2 CNR (Communication Network Riser) Slot................................................1-17

1.5.3 PCI (Peripheral Component Interconnect) Slots..........................................1-17

1.6 Connectors, Headers & Jumpers...........................................................1-18

Contents

1.6.1 Front Panel Connector: JPANEL1 ...............................................................1-19

1.6.2 ATX 20-pin Power Connector: JATXPWR1..............................................1-21

1.6.3 ATX 12V Power Connector: JATXPWR2.................................................1-21

1.6.4 AUX Power Connector: JAUXPWR1.........................................................1-21

1.6.5 Hard Disk Connectors: IDE1/IDE2..............................................................1-22

1.6.6 Floppy Disk Connector: FDC1.....................................................................1-22

1.6.7 Wake On LAN Header: JWOL1..................................................................1-22

1.6.8 Clear CMOSJumper: JCMOS1...................................................................1-23

1.6.9 Front USB Headers: JUSBF1/JUSBF2 (Optional).....................................1-23

1.7 Peripheral Port.......................................................................................1-24

1.7.1 PS/2 Mouse / Keyboard Connector: JKBMS1............................................1-24

1.7.2 USB Connector: JUSB1................................................................................1-25

1.7.3 Serial and Parallel Interface Ports..................................................................1-26

1.7.3.1 The Serial Interface: JCOM1/ JCOM2....................................................1-26

1.7.3.2 Parallel Interface Port: JPRNT1 ..............................................................1-28

1.7.4 Game (Joystick/MIDI) Port Connector: JGAME1 .....................................1-29

1.7.5 Audio Port Connectors: JSPKR1/JLIN1/JMIC1.........................................1-29

1.7.6 Audio Subsystem...........................................................................................1-30

1.7.6.1 CD-ROM Audio-In Header: JCD1..........................................................1-30

1.7.6.2 CD-ROM Audio-In Header: JCD2..........................................................1-31

1.7.6.3 Front Audio Header: JAUDIO1(Optional) .............................................1-31

1.7.6.4 Telephony Audio Header: JTAD1...........................................................1-31

1.7.6.5 Auxiliary Audio Header: JAUX1(Optional)...........................................1-31

2. BIOS Setup................................................................................2-1

Contents

iii

2.1 Main Menu..............................................................................................2-3

2.2 Standard CMOS Features........................................................................2-6

2.3 Advanced BIOS Features........................................................................2-9

2.4 Advanced Chipset Features...................................................................2-13

2.5 Integrated Peripherals ...........................................................................2-16

2.6 Power Management Setup.....................................................................2-21

2.7 PnP/PCI Configurations........................................................................2-26

2.8 PC Health Status ...................................................................................2-29

2.9 Frequency/Voltage Control...................................................................2-31

3. RAID BIOS Setting (Optional)................................................3-1

3.1 Getting Started ........................................................................................3-1

3.1.1 Introduction.......................................................................................................3-1

3.1.2 Main Features & Benefits................................................................................3-1

3.2 Installation of Driver...............................................................................3-2

3.2.1 Introduction.......................................................................................................3-2

3.2.2 Windows 98/ME..............................................................................................3-2

3.2.3 Windows NT4.0...............................................................................................3-4

3.2.4 Windows 2000.................................................................................................3-6

3.3 Use RAID Administrator ........................................................................3-8

3.3.1 Install RAID Administrator.............................................................................3-8

3.3.2 Run RAID Administrator................................................................................3-9

3.3.3 Create Stripe Array (RAID 0, for Performance)..........................................3-10

3.3.4 Create Mirror Array(RAID 1, for Data Protection)....................................3-15

Contents

3.3.5 Add/RemoveSpare Disk...............................................................................3-20

3.3.6 Synchronize/Validate/Verify Mirror Array..................................................3-21

3.3.7 Create Span Array..........................................................................................3-23

3.3.8 Create 0+1 Array (For Performance & Data Protection)............................3-24

3.3.9 Remove Disk Array.......................................................................................3-27

3.3.10 Set Transfer Mode........................................................................................3-28

3.3.11 Device Status................................................................................................3-29

3.3.12 Hot-swapping Hard Disks of Mirror Array................................................3-30

3.3.13 Event Log.....................................................................................................3-31

3.4 BIOS Configuration..............................................................................3-32

3.4.1 Enter into BIOS Configuration Utility..........................................................3-32

3.4.2 Create RAID...................................................................................................3-33

3.4.3 Delete RAID...................................................................................................3-34

3.4.4 Rebuild Mirror Array.....................................................................................3-34

3.4.5 Add Spare Disk..............................................................................................3-35

3.4.6 Remove Spare Disk .......................................................................................3-35

3.4.7 Set Disk Mode................................................................................................3-35

3.4.8 Set Boot Disk..................................................................................................3-36

4. Trouble Shooting.......................................................................4-1

Chapter 1 Motherboard Description

1-1

Introduction

System Overview

Congratulations on the purchase of your new system! This motherboard is designed

to takeadvantage of the latest industry technology to provide you with the ultimate

solution in data processing. In the tradition of its predecessors, this motherboard

continues a commitment to reliability and performance and strives for full compliance

and compatibility with industry software and hardware standards.

M7TDB Highlights:

8 Contains on board I/O facilities, which include two serial ports, a parallel port, a PS/2

mouse port, a PS/2 keyboard port, audio ports, USB ports and a game port.

8 Contains on board IDE facilities for IDE devices such as hard disks and CD-ROM

Drives.

8 Supports the Intel Pentium 4®(Socket 478) processor, a leading edge processor which

brings to you the latest technology in micro architecture design, graphics performance,

system bus design, cache architecture and much more.

8 Complies with PC ATX form factor specifications.

8 Supports popular operating systems such as Windows 95/98, Windows NT, Windows

2000, Windows ME, Novell, UNIX, LINUX and SCO UNIX.

Chapter 1 Motherboard Description

1-2

1. Motherboard Description

1.1 Features

1.1.1 Hardware

CPU

−Provides Socket-478.

−The Intel Pentium ®4 processor the new geheration power for high-end

workstations and servers.

Speed

−Runing at 400 MHz Front Side Bus frequency.

−Supports up to 2.4 GHz CPU core speeds.

−The 33MHz 32 bit PCI 2.2 compliant.

−The 66MHz AGP 2.0 compliant interface supports 1x, 2x and 4x data

transfer mode. (Supports only 1.5v AGP electricals.)

Chipset

−Chipset– Intel 82845/82801BA.

−Chipset – Winbond W83627HF.

Chapter 1 Motherboard Description

1-3

DRAM Memory

−Supports 100MHz or 133MHz SDR SDRAM devices.

−Supports 64Mb, 128Mb, 256Mb and 512Mb technologies for x8 and 16

devices

−Max of 3 Double-Sided DIMMs (6 rows populated) with unbuffered

PC133 (with or without ECC).

−The largest memory capacity possible is 3 GB.

−Maximum memory bandwidth of 1GB with PC133.

Shadow RAM

−Motherboard is equipped with a memory controller providing shadow

RAM and support for ROM BIOS.

Green Functionality

−Supports Award BIOS™ power management functionality.

−Has a power down timer from 1 to 15 minutes.

−Wakes from power saving sleep mode with any keyboard or mouse

activity.

BUS Slots

−(1) AGP slot.

−(1) CNR slot.

−(6) 32-bit PCI bus slots

Flash Memory

−Supports flash memory functionality.

−Supports ESCD functionality.

Chapter 1 Motherboard Description

1-4

Built in IDE Facilities

−Supports four IDE hard disk drives.

−Supports PIO Mode 4, Master Mode, and high performance hard disk

drives.

−Supports disk transfer rates up to 100 MB/second.

−Supports Ultra DMA 33, Ultra DMA 66, Ultra DMA 100 Bus Master

Modes.

−Supports IDE interface with CD-ROM.

−Supports high capacity hard disk drives.

−Supports LBA mode.

AC’97 Sound Codec Onboard

−AC-LINK protocol comfliance.

−Compliant with AC’97 2.2 specification.

−18-bit full duplex stereo ADC,DACs.

−SNR>95 Bb throughmixer and DAC.

−AC-3 playback required for PVD applications.

Universal Serial Bus

−Supports two back panel Universal Serial Bus Ports and two front panel

Universal Serial Bus Ports (optional).

−Supports 48 MHz USB.

Hardware Monitor Function

−Monitors CPU Fan Speed.

−Monitors System Voltage.

Otros manuales para M7TDB

Tabla de contenidos

Otros manuales de Placa madre de Biostar

Biostar

Biostar H61MLC Guía del usuario

Biostar

Biostar Z590 VALKYRIE Manual de usuario

Biostar

Biostar P4TDK Instrucciones de funcionamiento e instalación

Biostar

Biostar G31-M4 Manual de usuario

Biostar

Biostar H110MD PRO D4 Manual de usuario

Biostar

Biostar TH61U3+ Guía del usuario

Biostar

Biostar NF500 754 Manual de usuario

Biostar

Biostar H55 HD Manual de usuario

Biostar

Biostar K8NHA-M Grand Manual de usuario

Biostar

Biostar Z590GTA Manual de usuario

Biostar

Biostar Z590I VALKYRIE Manual de usuario

Biostar

Biostar M6TSS Manual de usuario

Biostar

Biostar TA790GX XE - BIOS Manual de usuario

Biostar

Biostar P4TCA PRO Instrucciones de funcionamiento e instalación

Biostar

Biostar 865G MICRO 775 Guía del usuario

Biostar

Biostar M7 VKG Manual de usuario

Biostar

Biostar TH55 HD - BIOS Guía del usuario

Biostar

Biostar M7SXG Manual de usuario

Biostar

Biostar M7TDF Manual de usuario

Biostar

Biostar TPower I45 Manual

Biostar

Biostar M6TLI Manual de usuario

Biostar

Biostar A740G M2L PLUS - BIOS 2 Guía del usuario

Biostar

Biostar H310MHP 2.0 Manual de usuario

Biostar

Biostar I915P-A7 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario