Biostar K8NHA-M Grand Manual de usuario

1EnglishEnglish

EnglishEnglish

English

BIOSTAR Motherboard

FCC Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

Any changes or modification made to this equipment void the user’s authority

to operate this equipment.

This equipment generates, uses, and radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the

following measures:

* Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help.

* All external cables connecting to this basic unit must be shielded.

C. D. C. Statement

ThisdigitalapparatusdoesnotexceedtheClassBlimitsforradionoiseemissions

from digital apparatus as set out in the radio interference regulations or the Canadian

Department of Communications.

CE Mark

This equipment is in conformity with the EMC directive.

EnglishEnglish

English

BIOSTAR Motherboard

Overview

The information in this document is subject to change without notice and

should not be construed as a commitment by the manufacturer.

The manufacturer assumes no responsibility for any errors that might appear

in this document.

The software described in this document is furnished under a license and may

be used or copied only in accordance with the terms of such license. No responsibility

is assumed for the use or reliability of software or equipment that is not supplied by the

manufacturer or its affiliated companies.

No part of this manual may be reproduced or transmitted in any form or by any

means, electronic or mechanical, photocopying, recording or otherwise, stored in any

retrieval system of any nature without the prior written permission of the manufacturer.

Trademark

Other product and company names mentioned herein may be trademarks and/

or service marks of their respective owners.

Intel and Pentium are registered trademarks of Intel Corporation.

Nvidia and nforce is registered trademark of Nvidia.

Sis is registered trademark of Silicon Integrated Systems Corporation.

PS/2 is registered trademark of International Business Machines Corporation.

VIA is registered trademark of VIA Technologies, Inc.

ATI is registered trademark of ATI Technologies, Inc.

AMD is registered trademark of Advanced Micro Devices, Inc.

3EnglishEnglish

EnglishEnglish

English

BIOSTAR Motherboard

Important Safety Information

1. Please read these safety instructions carefully.

2. Please keep this User’s Manual for later reference.

3. Please disconnect this equipment from AC outlet before cleaning. Don‘t use

liquid or sprayed detergent for cleaning. Use moisture sheet or clothe for

cleaning.

4. For pluggable equipment, the socket-outlet shall be installed near the equip-

ment and shall be easily accessible.

5. Please keep this equipment from humidity.

6. Lay this equipment on a reliable surface when install. A drop or fall could cause

injury.

7. Do not leave this equipment in an environment unconditioned, storage

temperature above 40°C, it may damage the equipment.

8. The openings on the enclosure are for air convection hence protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

9. Make sure the voltage of the power source when connect the equipment to the

power outlet.

10. Place the power cord such a way that people can not step on it. Do not place

anything over the power cord. The power cord must be rated for the product

and for the voltage and current marked on the product’s electrical ratings label.

The voltage and current rating of the cord should be greater than the voltage and

current rating marked on the product.

11. All cautions and warnings on the equipment should be noted.

12. If the equipment is not use for long time, disconnect the equipment from mains

to avoid being damaged by transient over-voltage.

13. Never pour any liquid into ventilation openings, this could cause fire or electrical

shock.

14. Never open the equipment. For safety reason, qualified service personnel

should only open the equipment.

15. If one of the following situations arises, get the equipment checked by service

personnel:

a. The Power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment has not work well or you can not get it work according to

user‘s manual.

e. The equipment has dropped and damaged.

f. If the equipment has obvious sign of breakage

EnglishEnglish

English

BIOSTAR Motherboard

Table of Contents

FCC Statement..............................................1

Overview .......................................................2

Section 1. Layout of K8NHA-M ...............5

Section 2. Component Index......................6

Section 3. K8NHA-M Features ..................7

Section 4. Package contents......................10

Section 5. Installation and Setup ............11

Section 6. Trouble Shooting.....................19

WarpSpeederTM ........................................................................ 21

5EnglishEnglish

EnglishEnglish

English

BIOSTAR Motherboard

Section 1. Layout of K8NHA-M

NOTE: “ ” represents the first pin.

BIOS

BAT1

IDE1

IDE2

FDD1

DDR1

JGAME1

JCOM2

JCOM1

J1394_USB1

JUSBLAN1

JKBMS1

JAUDIO

JSPDIF_OUT

JATXPWR2

JUSBV3

JUSB2

JUSB1

JCMOS1 1

JUSBV1

JWOL1

JSFAN1

JSFAN2

Socket 754 CPU1

NVIDIA CK 8

JPANEL1

123

242

CNR1

PCI1

PCI2

PCI3

CODEC

JSATA1

J1394A1

JCDIN1

JCDIN2

JCFAN1

JSPDIF_IN

JAUDIO1

JUSBV2

JSATA3 JSATA2

1 JKBMSV1

JDJ1

JCI1 1

1J3

SATA

Bridge

JCOM3

Super I/O

IT8712F

VIA

VT 6307

RTL8201BL

EnglishEnglish

English

BIOSTAR Motherboard

Section 2. Component Index

This section helps you to locate the components in the motherboard and to find

the details about them easily according to the mentioned pages.

A BackPanelConnectors (p.18) B JKBMSV1:5V/5VSBSelectionforKeyboard/Mouse (p.16)

C JUSBV1:5V/5VSBSelectionforJ1394_USB1 (p.14) D JCOM3:COM3Header(p.18)

E JATXPWR2:ATXPowerConnector (p.16) F JATXPWR2:ATXPowerConnector (p.16)

G J1394A1:Front1394AHeader (p.16) H JSFAN2:SystemFanHeader (p.12)

I JUSBV2:5V/5VSBSelectionforJUSBLAN1 (p.14) J JAUDIO1:FrontAudioHeader (p.17)

K JSPDIF_IN:DigitalAudioConnector (p.17) L JSATA2-3:SerialATAConnectors (p.13)

M AGP1:AcceleratedGraphicsPortSlot (p.13) N JCDIN1-2:CD-RomAudio-InHeaders (p.15)

O JSPDIF_OUT:DigitalAudioConnector (p.17) P JWOL1:WakeOnLANHeader (p.14)

Q JDJ1:AudioDJConnector (p.17) R PCI1-3:PeripheralComponentInterconnectSlots (p.13)

S CNR1:CommunicationNetworkRiserSlot (p.13) T JUSBV3:5V/5VSBSelectionforJUSB1/2 (p.14)

U JUSB1-2:FrontUSBHeaders (p.14) V J3:FlashRomRead/WriteEnable(optional) (p.17)

W JPANEL1:FrontPanelConnector (p.15) X JCI1:CaseOpenConnector (p.14)

Y JSFAN1:SystemFanHeader (p.12) Z JCMOS1:ClearCMOSJumper (p.13)

A1 JSATA1:SerialATAConnector (p.13) B1 JGAME1:GameHeader (p.15)

C1 IDE1-2:HardDiskConnectors (p.13) D1 DDR1-2:DDRDIMMModules (p.8)

E1 FDD1:FloppyDiskConnector (p.12) F1 JCFAN1:CPUFanConnector (p.11)

BAT1

Socket 754 CPU1

NVIDIA

CODEC

SATA

Bridge

Super

I/O

IT 8712F

VIA

VT 6307

RTL8201BL

PQR

STUVWXY

ZA1

7EnglishEnglish

EnglishEnglish

English

BIOSTAR Motherboard

Section 3. K8NHA-M Features

In this section, you shall find all the information about the

motherboard in your computer, including its features, layout,

component index, various jumpers, headers, connectors, and also

the installation guide to help you a quick and correct installation

of your system.

A. Hardware

CPUCPU

CPU* Supports Socket 754.

* Supports the AMD Athlon 64®Socket-754 processor start from 3200+/2.0GHz.

* Running at 200/400/600/800 MHz Front Side Bus.

ChipsetChipset

Chipset

* NVIDIA®CrushK8

- HyperTransport link to the AMD K8 CPU.

- Supports AGP3.0 8X interface.

- Running at 200/400/600/800 MHz Front Side Bus.

- Single USB 2.0 EHCI/Dual USB 1.1 OHCI, 6 ports.

- Fast ATA/133 IDE controllers.

- PCI 2.3 interface supporting.

- Supports system and power management.

- AC’97 2.1 interface.

Super I/OSuper I/O

Super I/O

* Chip: ITE IT8712F.

* Low Pin Count Interface.

* Provides the most commonly used legacy Super I/O functionality.

* Environment Control initiatives,

- H/W Monitor

- Fan Speed Controller

- ITE's “Smart Guardian” function

SlotsSlots

Slots* Three 32-bit PCI bus master slots.

* One AGP 4X/8X slot.

* One CNR slot.

EnglishEnglish

English

BIOSTAR Motherboard

Main MemoryMain Memory

Main Memory

* Supports up to two DDR devices.

* Supports 200/266/333/400MHz (with ECC) DDR devices.

* Maximum memory size is 2GB.

TotalMemorySizewithUnbufferedDIMMs

***only for your reference***

On Board IDEOn Board IDE

On Board IDE

* Supports four IDE disk drives.

* Supports PIO Mode 5, Bride Mode and Ultra DMA 33/66/100/133 Bus Master

Mode.

* Supports 1 Serial ATA (SATA) ports. (optional: when using SATA Bridge)

- Compliant with SATA 1.0 specification

- Data transfer rates up to 150 MB/s

1394 Chip (optional)1394 Chip (optional)

1394 Chip (optional)

* Chip: VIA VT6307.

* Supports 2 ports with transfer up to 400Mb/s.

LAN PHYLAN PHY

LAN PHY

* Chip: Realtek RTL8201BL.

* Supports 10/100 Mb/s operation.

* Half/Full duplex operation.

* Supports MII interface.

Serial ATA Bridge (optional)Serial ATA Bridge (optional)

Serial ATA Bridge (optional)

* Chips: 88I8030 Serial ATA Bridge

* Supports both host and device operation.

* Selectable maximum speeds of 66/100/133/150 Mb/s.

* Ultra low power consumption.

* Employs teh latest SATA transceiver (PHY) technology.

* Supports SSC.

tekcoSMMID noitacoL eludoMRDD eziSyromeMlatoT )BM(

1RDD -1/BM215/BM652/BM821/BM46 1*BG BG2sixaM

2RDD -1/BM215/BM652/BM821/BM46 1*BG

9EnglishEnglish

EnglishEnglish

English

BIOSTAR Motherboard

On Board ACOn Board AC

On Board AC’97 Sound Codec97 Sound Codec

97 Sound Codec97 Sound Codec

97 Sound Codec

* Chip: ALC655/CMI9761.

* Compliant with AC’97 specification.

* AC’97 2.2 interface.

* Supports S/PDIF-In (optional), S/PDIF-Out.

* Supports 6 channels.

On Board PeripheralsOn Board Peripherals

On Board Peripherals

a. Rear side

- 2 x serial ports. (COM1/COM2)

- 1 x Parallel Port

- Supports Audio ports in vertical.

- 1 x RJ-45 LAN jack.

- Supports PS/2 mouse and PS/2 keyboard.

- Supports 4 USB2.0 ports.

- 1 x IEEE 1394A connector (optional)

b. Front Side

- Supports 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M

and 2.88Mbytes.

- Supports 2 USB2.0 ports.

- 1 x game port

- Supports 1 S/PDIF-Out and 1 S/PDIF-In connector (optional).

- 1 x IEEE 1394 port (optional)

B. BIOS & Software

BIOSBIOS

BIOS* Award legal BIOS.

* Supports APM1.2.

* Supports ACPI.

* Supports USB Function.

* The setup procedures can be found in the Setup Driver CD.

SoftwareSoftware

Software

* Supports WarpspeederTM, 9th TouchTM, FLASHERTM, WatchdogTM,

WinFlasherTM and StudioFun!

* Offers the highest performance for Windows 98 SE, Windows 2000, Windows

Me, Windows XP, Linux, SCO UNIX, etc.

1010

EnglishEnglish

English

BIOSTAR Motherboard

Section 4. Package contents

Checkwhat you have bought before youstart your DIY action.

If there are anything missing, please contact your dealer

immediately.

* HDD Cable X 1

* FDD Cable X 1

* User's Manual X1

* USB 2.0 Cable X1 (optional)

* Rear I/O Panel for ATX Case X1 (optional)

* Fully Setup Driver CD X1

* StudioFun! Application CD X1 (optional)

* S/PDIF Cable X 1 (optional)

* Serial ATA Cable X 1 (optional)

Otros manuales para K8NHA-M Grand

Tabla de contenidos

Otros manuales de Placa madre de Biostar

Biostar

Biostar Hi-Fi A85S Manual de usuario

Biostar

Biostar P4 TDQ Guía del usuario

Biostar

Biostar 865G MICRO 775 Guía del usuario

Biostar

Biostar P4TSG PRO Manual de usuario

Biostar

Biostar A620MP-E PRO Manual de usuario

Biostar

Biostar NF61S MICRO AM2 SE Guía del usuario

Biostar

Biostar B760NH-E Manual de usuario

Biostar

Biostar M7TDA Manual de usuario

Biostar

Biostar 915GV-M7 Manual de usuario

Biostar

Biostar A880GB - BIOS Manual de usuario

Biostar

Biostar A57A2 Manual de usuario

Biostar

Biostar INTEL B760 STANDARD Series Manual de usuario

Biostar

Biostar B450MHP Manual de usuario

Biostar

Biostar H55A Manual de usuario

Biostar

Biostar B760MZ-E PRO Manual de usuario

Biostar

Biostar BIPV8M-IAE Guía del usuario

Biostar

Biostar Hi-Fi Z77X Guía del usuario

Biostar

Biostar P4M800 Pro-M7 Manual de usuario

Biostar

Biostar B760MXC PRO 2.0 Manual de usuario

Biostar

Biostar P31B-A7 - BIOS Manual de usuario

Biostar

Biostar P4M900 Micro 775 Guía del usuario

Biostar

Biostar M7SXG Manual de usuario

Biostar

Biostar TA785-A3 - BIOS Manual de usuario

Biostar

Biostar TA960 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario