Biostar I86PE-A7 Guía del usuario

Table of Contents

BIOS Setup …………………………………………………………1

1Main Menu .................................................................................................3

2Standard CMOS Features.........................................................................6

3Advanced BIOS Features..........................................................................8

4Advanced Chipset Features ...................................................................12

5Integrated Peripherals.............................................................................15

6Power Management Setup......................................................................22

7PnP/PCI Configurations ........................................................................ 27

8PC Health Status......................................................................................30

9Frequency Control................................................................................... 31

I86PE-A7 BIOS Setup

BIOS SETUP

Introduction

This manual discussed Award™ Setup program built into the ROM

BIOS. The Setup program allows users to modify the basic system

configuration. This special information is then stored in battery-backed

RAM so that it retains the Setup information when the power is turned

off.

The Award BIOS™ installed in your computer system’s ROM (Read

Only Memory) is a custom version of an industry standard BIOS. This

means that it supports Intel Pentium ®4 processor input/output system.

The BIOS provides critical low-level support for standard devices such

as disk drives and serial and parallel ports.

Adding important has customized the Award BIOS™, but nonstandard,

features such as virus and password protection as well as special

support for detailed fine-tuning of the chipset controlling the entire

system.

The rest of this manual is intended to guide you through the process of

configuring your system using Setup.

Plug and Play Support

These AWARD BIOS supports the Plug and Play Version 1.0A

specification. ESCD (Extended System Configuration Data) write is

supported.

EPA Green PC Support

This AWARD BIOS supports Version 1.03 of the EPA Green PC

specification.

APM Support

These AWARD BIOS supports Version 1.1&1.2 of the Advanced Power

Management (APM) specification. Power management features are

implemented via the System Management Interrupt (SMI). Sleep and

Suspend power management modes are supported. This AWARD BIOS

can manage power to the hard disk drives and video monitors.

ACPI Support

Award ACPI BIOS support Version 1.0 of Advanced Configuration and

Power interface specification (ACPI). It provides ASL code for power

management and device configuration capabilities as defined in the

ACPI specification, developed by Microsoft, Intel and Toshiba.

PCI Bus Support

This AWARD BIOS also supports Version 2.1 of the Intel PCI

(Peripheral Component Interconnect) local bus specification.

I86PE-A7 BIOS Setup

DRAM Support

DDR DRAM (Double Data Rate Synchronous DRAM) are supported.

Supported CPUs

This AWARD BIOS supports the Intel Pentium ®4 CPU.

Using Setup

In general, you use the arrow keys to highlight items, press <Enter> to

select, use the <PgUp> and <PgDn> keys to change entries, press

<F1> for help and press <Esc> to quit. The following table provides

more detail about how to navigate in the Setup program by using the

keyboard.

Keystroke Function

Up arrow Move to previous item

Down arrow Move to next item

Left arrow Move to the item on the left (menu bar)

Right arrow Move to the item on the right (menu bar)

Move Enter Move to the item you desired

PgUp key Increase the numeric value or make changes

PgDn key Decrease the numeric value or make changes

+ Key Increase the numeric value or make changes

- Key Decrease the numeric value or make changes

Esc key Main Menu – Quit and not save changes into CMOS

Status Page Setup Menu and Option Page Setup Menu –

Exit

Current page and return to Main Menu

F1 key General help on Setup navigation keys

F5 key Load previous values from CMOS

F7 key Load the optimized defaults

F10 key Save all the CMOS changes and exit

I86PE-A7 BIOS Setup

1 Main Menu

Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear

on the screen.





WARNING

The information about BIOS defaults on manual (Figure 1,2,3,4,5,6,7,8,9) is

just for reference; please refer to the BIOS installed on board, for update

information.

The Main Menu allows you to select from several setup functions. Use the

arrow keys to select among the items and press <Enter> to accept and enter

the sub-menu.

1.1 STANDARD CMOS FEATURES

This submenu contains industry standard configurable options.

1.2 ADVANCED BIOS FEATURES

This submenu allows you to configure enhanced features of the BIOS.

1.3 ADVANCED CHIPSET FEATURES

This submenu allows you to configure special chipset features.

1.4 INTEGRATED PERIPHERALS

This submenu allows you to configure certain IDE hard drive options and

Programmed Input/ Output features.

1.5 POWER MANAGEMENT SETUP

This submenu allows you to configure the power management features.

I86PE-A7 BIOS Setup

1.6 PNP/PCI CONFIGURATIONS

This submenu allows you to configure certain “Plug and Play” and PCI

options.

1.7 PC HEALTH STATUS

This submenu allows you to monitor the hardware of your system.

1.8 FREQUENCY CONTROL

This submenu allows you to change CPU Vcore Voltage and CPU/PCI

clock.

(However, this function is strongly recommended not to use. Not properly

change the voltage and clock may cause CPU or M/B damage!)

1.8 LOAD OPTIMIZED DEFAULTS

This selection allows you to reload the BIOS when the system is having

problems particularly with the boot sequence. These configurations are

factory settings optimized for this system. A confirmation message will be

displayed before defaults are set.

1.9 SET SUPERVISOR PASSWORD

Setting the supervisor password will prohibit everyone except the

supervisor from making changes using the CMOS Setup Utility. You will

be prompted with to enter a password.

1.10 SET USER PASSWORD

If the Supervisor Password is not set, then the User Password will

function in the same way as the Supervisor Password. If the

Supervisor Password is set and the User Password is set, the “User” will

only be able to view configurations but will not be able to change them.

I86PE-A7 BIOS Setup

1.11 SAVE & EXIT SETUP

Save all configuration changes to CMOS(memory) and exit setup.

Confirmation message will be displayed before proceeding.

1.12 EXIT WITHOUT SAVING

Abandon all changes made during the current session and exit setup.

Confirmation message will be displayed before proceeding.

UPGRADE BIOS

This submenu allows you to upgrade bios.

I86PE-A7 BIOS Setup

2 Standard CMOS Features

The items in Standard CMOS Setup Menu are divided into 10 categories. Each

category includes no, one or more than one setup items. Use the arrow keys to

highlight the item and then use the<PgUp> or <PgDn> keys to select the value

you want in each item.

I86PE-A7 BIOS Setup

2.1 MAIN MENU SELECTIONS

This table shows the selections that you can make on the Main Menu.

Item Options Description

Date mm : dd : yy Set the system date. Note that the ‘Day’

automatically changes when you set

the date.

Time hh : mm : ss Set the system internal clock.

IDE Primary

Master Options are in its sub

menu. Press <Enter> to enter the sub menu of

detailed options

IDE Primary Slave Options are in its sub

menu. Press <Enter> to enter the sub menu of

detailed options.

IDE Secondary

Master Options are in its sub

menu. Press <Enter> to enter the sub menu of

detailed options.

IDE Secondary

Slave Options are in its sub

menu. Press <Enter> to enter the sub menu of

detailed options.

Drive A

Drive B

360K, 5.25 in.

1.2M, 5.25 in

720K, 3.5 in.

1.44M, 3.5 in.

2.88M, 3.5 in

None

Select the type of floppy disk drive

installed in your system.

Video EGA/VGA

CGA 40

CGA 80

MONO

Select the default video device.

Halt On All Errors

No Errors

All, but Keyboard

All, but Diskette

All, but Disk/ Key

Select the situation in which

you want the BIOS to stop

the POST process and

notify you.

Base Memory N/A Displays the amount of

conventional memory

detected during boot up.

Extended Memory N/A Displays the amount of

extended memory detected

during boot up.

Total Memory N/A Displays the total memory

available in the system.

I86PE-A7 BIOS Setup

3 Advanced BIOS Features

3.1 BOOT SEQ & FLOPPY SETUP

3.1.1 First/ Second/ Third/ Boot Other Device

These BIOS attempt to load the operating system from the device in

the sequence selected in these items.

The Choices:

Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3,

ZIP100, LAN, HPT370, Disabled, Enabled.

3.1.2 Swap Floppy Drive

For systems with two floppy drives, this option allows you to swap

logical drive assignments.

The Choices:

Disabled (default), Enabled.

3.1.3 Boot Up Floppy Seek

Enabling this option will test the floppy drives to determine if they

have 40 or 80 tracks. Disabling this option reduces the time it takes to

boot-up.

The Choices:

Disabled, Enabled (default).

3.1.4 Report NO FDD for Win95

The Choices:

NO (default).

I86PE-A7 BIOS Setup

3.2 CACHE SETUP

CPU L1&L2 Cache

Depending on the CPU/chipset in use, you may be able to increase

memory access time with this option.

Enabled (default) Enable cache.

Disabled Disablecache.

3.3 CPU FEATURE

3.3.1 Thermal Management

This item allows you to choose the monitor’s thermal management.

The Choices:

Thermal Management 1 (default), Thermal Management 2.

3.3.2 TM2 Bus Ratio

Represents the frequency bus ratio of the throttled performance state

that will be initiated when the on-die sensor goes from not hot to hot.

The Choices:

0X (default).

3.3.3 TM2 Bus VID

Represents the voltage of the throttled performance state that will be

initiated when the on-die sensor goes from not hot to hot.

The Choices:

0.8375 (default).

3.3.4 Limit CPUID

This item allows you to set the limit of the CPU ID with a maximum

value to 3. It should be disabled for WinXP.

The Choices:

Disabled (default), MaxVal.

3.4 VIRUS WARNING

This option allows you to choose the Virus Warning feature that is used

to protect the IDE Hard Disk boot sector. If this function is enabled and

an attempt is made to write to the boot sector, BIOS will display a

warning message on the screen and sound an alarm beep.

Enabled Virus protection is activated.

Disabled (default) Virus protection is disabled.

Otros manuales para I86PE-A7

Tabla de contenidos

Otros manuales de Placa madre de Biostar

Biostar

Biostar TA785G3 PLUS - BIOS Manual de usuario

Biostar

Biostar M6VSA Manual de usuario

Biostar

Biostar MCP6PB M2 PLUS - BIOS Guía del usuario

Biostar

Biostar P4M900-M7 FE Guía del usuario

Biostar

Biostar 945P-A7B Guía del usuario

Biostar

Biostar G31-M7 Guía del usuario

Biostar

Biostar GF8100 M2G PLUS - BIOS Guía del usuario

Biostar

Biostar TH67A+ Guía del usuario

Biostar

Biostar NF4UL-A9 Manual de usuario

Biostar

Biostar G31-M7 TE - BIOS Guía del usuario

Biostar

Biostar P43C-A7 - BIOS Manual de usuario

Biostar

Biostar P4M900-M7 SE Guía del usuario

Biostar

Biostar X470GTA Manual de usuario

Biostar

Biostar H81A Guía del usuario

Biostar

Biostar M7 VKH Manual de usuario

Biostar

Biostar Hi-Fi A70U3 Guía del usuario

Biostar

Biostar U8568 Manual de usuario

Biostar

Biostar M7NCD Ultra Manual de usuario

Biostar

Biostar H61MGC Guía del usuario

Biostar

Biostar A770E3 Guía del usuario

Biostar

Biostar P4 SFA Guía del usuario

Biostar

Biostar P4TCA PRO Guía del usuario

Biostar

Biostar TH55 HD - BIOS Manual de usuario

Biostar

Biostar PT880 Pro-A7 Combo Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario