Billy Goat LB61 Manual de usuario

Part No 901009 Form No F040908A

LB Owner’s Manual

BILLY GOAT LB VACUUM

Owner's Manual

LB61

Optional Accessories

HOSE KIT

4"(102mm) x

7' (3.05m)

For

vacuuming in

hard to reach

areas.

HOSE

CONNECTOR

KIT

P/N 900460

To connect two

lengths of 4”

hose (hose not

included).

P/N 890045

BAG SUPPORT

KIT

Extends bag life

by keeping bag

from dragging

ground.

P/N 900645

STANDARD

FELT DEBRIS

BAG

For use in

dusty

conditions.

P/N 900719

OPTIONAL

TURF DEBRIS

BAG

For use in

leaves and

grass in non-

dusty

conditions.

P/N 90072

Part No 901009 Form No F040908A

LB Owner’s Manual

ABOUT THIS MANUAL

THANK YOU for purchasing a BILLY GOAT ®LB Vacuum. Your new machine has been carefully designed and

manufactured to provide years of reliable and productive service. This manual provides complete operating and

maintenance instructions that will help to maintain your machine in top running order. Read this manual carefully

before assembling, operating, or servicing your equipment.

CONTENTS

SERIAL PLATE DATA AND SPECIFICATIONS 3

GENERAL SAFETY 4-5

SOUND AND VIBRATION 6

INSTRUCTIONLABELS 7

PACKING CHECKLIST & ASSEMBLY 8

OPERATION 9-10

MAINTENANCE 11

TROUBLESHOOTING AND WARRANTY PROCEDURE 12

MAINTENANCE RECORD 13

ILLUSTRATED PARTS & PARTS LISTS 14-15

Part No 901009 Form No F040908A

LB Owner’s Manual

SERIAL PLATE DATA

Record the model number, serial number, date of

purchase, and where purchased.

Purchase Date:

Purchased From:

Specifications

LB61

Engine: HP 6.0 (4.47 kW)

Engine: Type B & S QUANTUM

Engine: Model 112K020124E1

Engine: Fuel Capacity 1.5 qt. (1.4 L)

Engine: Oil Capacity 0.63 qt. (0.6 L)

Total Unit Weight: 63# (28.58 kg)

Overall Length 47” (1.19 m)

Overall Width 21.5” (0.55 m)

Overall Height 40.5” (1.02 m)

Max. operating slope 200

Sound in accordance with

2000/14/EEC standards

105dBa

Sound at operators ear 85dBa

Vibration at operator position 1.06g (10.4m/s2)

Part No 901009 Form No F040908A

LB Owner’s Manual

GENERAL SAFETY INSTRUCTIONS and SYMBOLS

The safety symbols shown below are used throughout this manual. You should become familiar with them before

assembling, operating, or servicing this equipment.

This symbol indicates important information that will prevent injury to yourself or others.

This symbol indicates ear protection is recommended when operating this equipment.

This symbol indicates eye protection is recommended when operating this equipment.

This symbol indicates gloves should be worn when servicing this equipment.

This symbol indicates that this manual and the engine manufacturer’s manual should be read

carefully before assembling, operation, or servicing this equipment.

This symbol indicates important information that will prevent damage to your BILLY GOAT ®

LB Vacuum.

This symbol indicates the engine oil level should be checked before operating this

equipment.

Read and make sure you thoroughly understand the following safety precautions before assembling, operating or

servicing this equipment:

READ this manual and the engine manufacturer’s manual carefully before assembling,

operating, or servicing this equipment.

EAR PROTECTION is recommended when operating this equipment.

EYE PROTECTION is recommended when operating this equipment.

BREATHING PROTECTION is recommended when operating this equipment.

EXHAUST from this product contains chemicals known to the State of California to cause

cancer, birth defects or other reproductive harm.

DO NOT operate this equipment on any unimproved forested, brushy, or grass covered land

unless a spark arrester is installed on the muffler as required by Section 4442 of the

California Public Resources Code. The arrester must be maintained in good working order.

Other states may have similar laws. Federal laws apply on federal lands.

DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an

odorless and possibly fatal poison.

Part No 901009 Form No F040908A

LB Owner’s Manual

DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is

recommended.

DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least

two minutes before refueling.

DO NOT store gasoline near an open flame.

DO NOT remove gas cap while engine is running.

DO NOT start or operate engine if strong odor of gasoline is present.

DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until

gasoline has completely evaporated.

DO NOT smoke while filling the fuel tank.

DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark

tester.

DO NOT operate engine without a muffler. Inspect muffler periodically and replace if

necessary. If equipped with muffler deflector, inspect deflector periodically and replace if

necessary.

DO NOT operate engine with grass, leaves or other combustible material near the muffler.

DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may

cause severe burns.

DO NOT leave equipment unattended while in operation.

DO NOT park equipment on a steep grade or slope.

DO NOT operate equipment with bystanders in or near the work area.

DO NOT allow children to operate this equipment.

DO NOT operate equipment with guards removed.

DO NOT operate equipment near hot or burning debris or any toxic or explosive materials.

DO NOT operate equipment on slopes greater than specified in Specifications section of this

manual.

DO NOT place hands or feet underneath unit, or near any moving parts.

ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting.

ALWAYS check fuel lines and fittings frequently for cracks or leaks. Replace if necessary.

ALWAYS keep hands and feet away from moving or rotating parts.

ALWAYS store fuel in approved safety containers.

WARNING: Important

Remove all rocks, wire, string, plastic, etc. that can present a hazard during work prior to

starting.

DO identify and mark all fixed objects to be avoided during work such as sprinkler heads,

water valves, buried cables, or clothes line anchors, etc.

Part No 901009 Form No F040908A

LB Owner’s Manual

SOUND

SOUND LEVEL 85 dB(a) at Operator Ear

Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 12-12-2002 under the

conditions listed below.

Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on

the unit for the sound power level for your model.

VIBRATION DATA

VIBRATION LEVEL 1.06g (10.4m/s2)

Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using

calibrated vibration test equipment. Tests were performed on 12-12-06 under the conditions listed below.

INTENDED USE

INTENDED USE: This machine is designed for vacuuming leaves, grass clippings and other types of organic litter.

Debris mixed with cans, bottles and small amounts of sand can be vacuumed; however, it is not this machine's

primary purpose. Vacuuming cans, bottles and sand will affect the longevity of your machine.

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check

for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note:

See parts list for proper impeller bolt torque specifications. (See trouble shooting section on page 12).

General Conditions: Sunny

Temperature: 57oF (14.3oC)

Wind Speed: 12 mph (19.3 kmh)

Wind Direction: Southeast

Humidity: 46.4%

Barometric Pressure: 30.10”Hg (764.6 mm Hg)

General Conditions: Sunny

Temperature: 57oF (14.3oC)

Wind Speed: 12 mph (19.3 kmh)

Wind Direction: Southeast

Humidity: 46.4%

Barometric Pressure: 30.10”Hg (764.6 mm Hg)

105 dB

Part No 901009 Form No F040908A

LB Owner’s Manual

INSTRUCTION LABELS

The labels shown below were installed on your BILLY GOAT ®LB Vacuum. If any labels are damaged or missing, replace them before operating

this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The

correct position for each label may be determined by referring to the Figure and Item numbers shown.

LABEL DANGER KEEP HANDS LABEL EAR EYE BREATHING ITEM #23 DANGER FLYING DEBRIS

AND FEET AWAY P/N 890254 ITEM # 73 P/N 810736

ITEM #67 P/N 400424

LABEL READ MANUAL LABEL EXPLOSIVE FUEL DEBRIS BAG LABEL

ITEM #76 P/N 430363 ITEM # 75 P/N 400268 ITEM #10

ENGINE CONTROLS & LABELS

Throttle Control

Choke Control

BRIGGS & STRATTON

Briggs engines have a primer

button carburetor rather than

choke type carburetor.

Part No 901009 Form No F040908A

LB Owner’s Manual

PACKING CHECKLIST

Your Billy Goat LB Vacuum is shipped from the factory in one carton, completely assembled except for the

upper handle, debris bag.

PUT OIL IN ENGINE BEFORE STARTING

ASSEMBLY

READ all safety instructions before assembling unit.

TAKE CAUTION when removing the unit from the box the Handle Assembly is attached by

cables and folded over

Your Billy Goat is shipped from the factory in one carton, completely assembled except for the debris bag.

1. ROTATE upper handle into upward position and securely tighten knobs. Machine can be stored with handle

folded in down position.

2. UNFOLD the debris bag (item 10) and fasten bag neck onto exhaust discharge opening.

3. ATTACH bag hanger straps to loops (item 38), preassembled to upper handle.

4. CONNECT spark plug wire.

Boxing Parts

Checklist

Debris Bag

P/N-900718

Literature Assy

P/N-901008

Briggs & Stratton

6.0 HP Quantum

PARTS BAG &

LITERATURE ASSY

Warranty card P/N- 400972, Owner’s Manual P/N-901009, Declaration of Conformity P/N-900782,

atu

LB A

ccesso

900

714.

Part No 901009 Form No F040908A

LB Owner’s Manual

OPERATION

STORAGE

Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach

an open flame, spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance.

If engine is to be unused for 30 days or more, prepare as follows:

Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and

causing possible malfunction of engine. Drain fuel outdoors, into an approved container, away from open flame. Be

sure engine is cool. Do not smoke. Run engine until fuel tank is empty and engine runs out of gasoline.

NOTE: Fuel stabilizer (such as Sta-Bil) is an acceptable alternative in minimizing the formation of fuel gum deposits

during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow mix ratio found on

stabilizer container. Run engine at least 10 min. after adding stabilizer to allow it to reach the carburetor.

Like all mechanical tools, reasonable care must be used when operating machine.

Inspect machine work area and machine before operating. Make sure that all operators of this

equipment are trained in general machine use and safety.

PUT OIL IN ENGINE BEFORE STARTING

STARTING

ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine

must be level when checking and filling oil and gasoline.

ENGINE SPEED: Controlled by throttle lever on the engine. Under normal conditions, operate at minimum

throttle to accomplish your current cleaning task.

PRIMER: Push primer.

THROTTLE: Move throttle control to fast position (on engine). Pull starting rope to start engine.

IF YOUR UNIT FAILS TO START:

See Troubleshooting on page 12.

HANDLING & TRANSPORTING:

Using two people to lift machine is recommended. Lift holding the handle and front of nozzle. Secure in place

during transport.See page 3 for weight specifications

Never lift the machine while the engine is running.

Part No 901009 Form No F040908A

LB Owner’s Manual

OPERATION

VACUUMING OPERATION

VACUUM NOZZLE HEIGHT ADJUSTMENT:is raised and lowered by adjusting front wheel height control.

FOR MAXIMUM PICKUP: Adjust nozzle close to debris, but without blocking airflow into the nozzle. NOTE:

Never bury nozzle into debris.

CLEARING A CLOGGED NOZZLE & EXHAUST:Turn engine off and wait for impeller to stop completely

and disconnect spark plug wire. Wearing durable gloves, remove clog. Danger, the clog may contain sharp

materials. Reconnect spark plug wire.

DEBRIS BAG

Debris bags are normal replaceable wear items.

Note: Frequently empty debris to prevent bag overloading with more weight than you can lift.

An optional bag and dust cover is available for use where debris will be vacuumed in dusty conditions (see Optional

Accessories shown on page 1).

DO NOT place bag on or near hot surface, such as engine. Run engine at 1/2 throttle for first 1/2 hour to condition

new bag. Your new bag requires a break-in period to condition the pores of the material against premature blockage.

The entire bag surface serves as a filter, and must be able to breath to have good vacuum performance.

Be sure engine has come to a complete stop before removing or emptying bag.

This vacuum is designed for picking up trash, organic material and other similar debris (see Safety Warnings

page 2 & 3).

However, many vacuums are used where dust is mixed with trash. Your unit can intermittently vacuum in dusty areas.

Dust is the greatest cause of lost vacuum performance. However, following these rules will help maintain your

machine's ability to vacuum in dusty conditions:

•Run machine at idle to quarter throttle.

•The debris bag must be cleaned more frequently. A vacuum with a clean, pillow soft bag will have good pickup

performance. One with a dirty, tight bag will have poor pickup performance. If dirty, empty debris and vigorously shake

bag free-of-dust.

•Machine or pressure-wash debris bag if normal cleaning does not fully clean bag. Bag should be thoroughly dry before

use.

Having one or more spare debris bags is a good way to reduce down time while dirty bags are being cleaned.

•DO NOT leave debris in bag while in storage.

COMPOST

Vacuumed leaves, grass and other organic material from your own yard can be emptied into a pile or composter to

provide enriched soil for later use as fertilizer in gardens and flower beds

NOTE: Allow green chips to dry before spreading around living plants.

Tabla de contenidos

Otros manuales de Aspiradora de Billy Goat

Billy Goat

Billy Goat TR1104 Manual de usuario

Billy Goat

Billy Goat VQ1002SP Manual de usuario

Billy Goat

Billy Goat TR1102 Manual de usuario

Billy Goat

Billy Goat QL2300KO Manual de usuario

Billy Goat

Billy Goat QV550HSPEU Manual de usuario

Billy Goat

Billy Goat KV VACUUM KV600 Manual de usuario

Billy Goat

Billy Goat OWNER'S MANUAL KD501 Manual de usuario

Billy Goat

Billy Goat KV VACUUM KV600 Manual de usuario

Billy Goat

Billy Goat KV601 Manual de usuario

Billy Goat

Billy Goat QV900HSP Manual de usuario

Billy Goat

Billy Goat KD511IC Instrucciones de instalación

Billy Goat

Billy Goat KD502H Instrucciones de instalación

Billy Goat

Billy Goat MV650H Manual de usuario

Billy Goat

Billy Goat KD 50CT Manual de usuario

Billy Goat

Billy Goat KV650SPEU Manual de usuario

Billy Goat

Billy Goat KD512HC Manual de usuario

Billy Goat

Billy Goat QV550 Manual de usuario

Billy Goat

Billy Goat QV550EU Manual de usuario

Billy Goat

Billy Goat VQ1002SP Instrucciones de instalación

Billy Goat

Billy Goat VACUUM CLEANER KD-50 Manual de usuario

Billy Goat

Billy Goat KV601EU Manual de usuario

Billy Goat

Billy Goat PA-76559 Instrucciones de instalación

Billy Goat

Billy Goat DL3701VE Manual de usuario

Billy Goat

Billy Goat KV601SPFB Manual de usuario

Manuales populares de Aspiradora de otras marcas

Bissell

Bissell LittleGreen Proheat 1425 Series Manual de usuario

Panasonic

Panasonic MC-YL637S147-AE Manual de usuario

NEFF

NEFF N17XH10 0 Series Manual de usuario

LG A9 Series Manual de usuario

Oreck

Oreck Cordless Captura BK51700 Series Manual de usuario

Kogan

Kogan KAVACROBVWA Manual de usuario

Kränzle

Kränzle VENTOS 50 ID Guía del usuario

EVVO

EVVO Ai35 Manual de usuario

DeWalt

DeWalt DWH200D Manual de usuario

Pontec

Pontec Pondomatic Vacuum Cleaner Manual de usuario

Cleanmaxx

Cleanmaxx PC-P007E Manual de usuario

Exido

Exido 240-114 Manual de usuario

RIDGID

RIDGID WD1685AU0 Manual de usuario

Ezviz

Ezviz RE4P Manual de usuario

STG global

STG global TANVAC HDV3000 Manual de usuario

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manual de usuario

Factory

Factory M3340 Manual de usuario

Shop-Vac

Shop-Vac VN92 SERIES Manual de usuario