SERVICE MANUAL
ROCK MACHINE
Rock Machine would like to congratulate you on the purchase of your new product. We place
great emphasis on the choice of materials and their processing so as to ensure the highest
quality of our products, a long service life and great functionality. Our name is a symbol of a
captivating design, concept and appearance.
To enjoy unlimited riding pleasure with your high-quality Rock Machine product
for many years to come, it is necessary to observe certain rules defined and specified in the
Service Manual. You have received the Operating Manual with your bike.
Rock Machine supplies high-quality bicycles exclusively for specialized shops. These products
are already partially pre-assembled.
The final assembly of the bike can only be carried out by an authorized Rock Machine dealer.
This particularly applies to the basic configuration of suspension components, the front
and back derailleurs and braking systems. This will ensure maximum safety when using the
product.
WARNING
WARNINGS RELATED TO
MECHANICAL WORK
Specialized skills and tools are required to
configure and tune the bike. These tasks
should only be carried out by employees
at an authorized service station. Riding a
bike that has not been correctly configured
and assembled can be dangerous. Even a
seemingly minor deficiency, such as a loose
screw, can cause a crucial part to break over
time and the loss of control of the bike, leading
to an accident. Therefore, we recommend that
you leave any repairs and maintenance for your
bicycle to an authorized service centre. Your
safety depends on the correct maintenance
of the bike. Employees of authorized service
stations have special qualifications and know-
how.
WARNING
Any adjustments and modifications can lead
to the frame, fork or other parts becoming
unsafe. The use of an unapproved component
or the incorrect assembly of parts can lead
to excessive wear and tear of the bike or its
parts. Adjustments to the frame, fork or other
components can have a negative impact on
the handling of the bike and may lead to a
fall. Do not grind off, drill or file any parts; do
not remove backup safety elements, do not
install incompatible forks and do not make
any other similar unauthorized changes.
Before you install any accessories on your
bicycle, or replace any part, always consult the
service centre staff to make sure the particular
accessory or part is compatible and safe to
use.
Type-3 operating conditions
Riding on trails, crossing small obstacles and technical courses of
medium difficulty as well as stretches where the tyres do not make
contact with the ground for a short period of time; jumps and drops not
exceeding 61 cm (24").
BIKE CATEGORY
e-Blizz
Mountain bikes are equipped with a rear suspension and are constructed for “standard”,
“racing”, “cross-country” or “singletrack-trail” rides, assuming adherence to type-3 operating
conditions:
PREVENTING DAMAGE
If you are transporting the bike in a box, make sure that the bike is kept safe, for instance by
using a soft foam cover. Make sure that there are no foreign items or that excessive pressure
or force from these items cannot damage the frame. Please keep in mind that the warranty
does not apply to damage caused during transit.
