Bikecomm BK-D Manual de usuario

Owner’s Manual

Bluetooth Dongle

BK-D

1PACKAGE CONTENTS .................................................................................................................. 3

2INSTALLATION ............................................................................................................................. 4

3BK-D BUTTONS............................................................................................................................. 5

4BK-D DONGLE OPERATION......................................................................................................... 5

5POWER ON/OFF LED..................................................................................................................... 6

6PAIRING AND USAGE OF HEADSET AND BK-D ....................................................................... 7

6.1 ALOHA PAIRING WITH BK-D.......................................................................................................7

6.2 ALOHA RECONNECTING BK-D ....................................................................................................8

6.3 USING ALOHA AND BK-D ...........................................................................................................8

6.4 BK-S1 PAIRING WITH BK-D ........................................................................................................11

6.5 BK-S1 RECONNECTING BK-D.....................................................................................................11

6.6 USING BK-S1 AND BK-D ............................................................................................................ 11

7ERASE PAIRING INFORMATION ............................................................................................... 14

8SWITCH AUDIO NOTIFICATION................................................................................................ 14

1Package Contents

・BK-D Dongle

・PTT transmission button

・PTT extension cable

・Speed radar/GPS audio cable

・K Type radio cable

・Micro USB recharging

cable

・Mini USB 接頭及喇叭

・adhesive fabric fastener(to bike handle)

2Installation

BK-D dongle provides a complete integration of “radio”and “speed radar”. You

can use the adhesive fabric fastener (accessory) to attach the BK-D to your bike, and then

plug the radio cable, PTT transmission button, and radar speed audio cable (from left to

right) to your BK-D to accomplish the installation.

(Warning) Please do not use the cigarette lighter receptacle or other

12V-5V converter charger to connect your bike battery to BK-D dongle, which may cause

noise in radio transmission.

・PTT Adhesive

pad

公)(公)(公)(公)()

・全罩式麥克風

・PTT fabric fastener(fabric)

・PTT fabric

fastener(hooks)

3BK-D Buttons

1.BK-D includes a slide cover. After finishing pairing, we suggest you slide the cover over

to avoid accidentally pressing the buttons.

2.BK-D Buttons and Connection

4BK-D Dongle Operation

BK-D can integrate the audio from the radio and the speed radar and transmit the mixed

audio through Bluetooth to your Bluetooth headset. WE suggest you use the BK-S1 or

ALHOA headset for optimal performance. In this manual, you will find the operation

scenario to best suit your needs.

5Power ON/OFF LED

1. Power On: Press [P] until LED turns blue.

Note: When BK-D is ON, a disconnection from the headset for 15 minutes will

automatically turn off BK-D to save power.

2. Power Off: Press [A] and [B] simultaneously until the LED turns red. When BK-D is

connected to the headset, powering off BK-D will trigger the voice announcement of

the BK-D software version and power capacity.

3. BK-D supports power on/off through PTT button.

Power On: press transmission button.

Power Off: press side button.

4. Recharge: During recharging, LED stays red. When fully recharged, LED turns green.

5. Battery capacity notification: when BK-D is on, press [B] for 3 seconds and the LED

flashes green to indicate the battery capacity (as the table below). If BK-D is

connected to the headset, the headset can hear the announcement of BK-D software

version and the battery capacity.

Number of times flashes green

Battery Capacity

5 times

100%

4 times

Over 80%

3 times

Over 50%

2 times

Near 25%

1 times

Near 10%

6. Recharge note:

BK-D supports standard 5V USB for recharging. You may use PC, cell phoner

recharger or mobile recharger to recharge BK-D.

BK-D is shipped with a small amount of power. WE suggest you to fully recharge

BK-D before your first use.

6Pairing and Usage of Headset and BK-D

Please upgrade the software to V2.00 version if you use BK-S1 or ALOHA.

6.1 ALOHA Pairing with BK-D

1. Turn on ALOHA, and press [M] until LED flashes red/blue alternatingly.

2. BK-D is on, press [A] until LED flashes blue rapidly. At this point, BK-D and

ALOHA start to pair and establish connection.

3. When successfully connected to BK-D, LED flashes blue three times + green once.

Note: When you connect your headset with both BK-D and cell phone, be sure to pair with

BK-D first and then with cell phone. In this order, the “re-dial last number”and

“audio dialing”functions of the cell phone can be used (refer to 6.X).

6.2 ALOHA Reconnecting BK-D

1. After ALOHA paired with BK-D, the next time ALOHA will automatically reconnect

to BK-D if your turn on the BK-D first and then turn on ALOHA.

2. When ALOHA is disconnected from BK-D due to distance reason, you may press [P]

on BK-D or press PTT transmission button, and BK-D will automatically reconnect to

ALOHA.

6.3 Using ALOHA and BK-D

1. ALOHA +BK-D

After successful pairing of ALOHA and BK-D, you are ready to use BK-D audio

signal.

2. ALOHA (1-on-1 intercom)+BK-D

When you are to use ALOHA 1-on-1 intercom and BK-D at the same time, please

establish the 1-on-1 intercom first. At this point, the BK-D audio signal can be heard

on both ALOHA headsets while the two headsets are in 1-on-1 intercom.

3. ALOHA connected to cell phone +BK-D

BK-D can be used during ALOHA in cell phone conversation or playing music)

4. ALOHA connected to Garmin 660and cell phone +BK-D

ALOHA supports simultaneous connection to both devices. Please pair the cell phone with

Garmin 660 when you want to connect BK-D to both devices.

Note: During 1-on-1 intercom, to receive an incoming call (with Garmin 660 present),you

must press [A] to end the intercom before answering the call; otherwise, the phone

conversation will be heard in the other headset.

Caution:

When two ALOHA headset have their respective BK-D, please do not use BK-D (radio

transmission) during 1-on-1 intercom; otherwise, feedback noise will interfere the radio.

Tabla de contenidos

Manuales populares de Enrutador inalámbrico de otras marcas

Milesight

Milesight UG67 Manual de usuario

Airlogic

Airlogic AirSync Class 1 Manual del propietario

Samsung

Samsung WCH730B Manual de usuario

TELEFONICA

TELEFONICA USB Adapter Manual de usuario

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manual de usuario

Askey

Askey RAC2V1K Manual de usuario

Alloy

Alloy WLF2454AP-S Manual de usuario

TP-Link

TP-Link TL-WR542G Manual de usuario

NETGEAR

NETGEAR WNR2000v4 Manual de usuario

Hama

Hama 53120 Manual de usuario

Intellinet

Intellinet 524582 Manual de usuario

Asus

Asus RT-N10P Manual de usuario

D-Link

D-Link DIR-506L Manual de usuario

Sapido

Sapido GR297n Manual de usuario

Asus

Asus DSL-N55U Manual de usuario

AMTC

AMTC WR7502 Manual de usuario

Compaq

Compaq CP-2W - iPAQ Connection Point Manual de usuario

SMC Networks

SMC Networks WBR14-N2 FICHE Manual de usuario