BIGSTONE C500B-LCD Manual de usuario
www.IonElectricBicycles.com
Model C500B-LCD Instructions
p
age
1
CONTENT
ABOUT THE USER MANUAL…………………………………………......………........………….. 2
OUTLOOK AND SIZE………………………………………………....….……....…………….…… 2
MA TERIAL AND SIZE……………………………………………………………………………… 2
BUTTON DEFINITION…………………….......................................................................………….. 3
FUNCTION SUMMARY…………………..............................................................…………………. 4
FUNCTION SUMMARY……………………………………………………………………………. 4
FULL VIEW AREA………………………………………………………………………………….. 6
NORMAL VIEW AREA…………………………………………………………………................... 6
NORMAL OPERATION…………………………………………………..…….………………....…..7
1.ON/OFF…………………………………………………………………………………………… 7
2. CURRENT DISPLA Y……………………………………………………………………………... 7
3.RIDING MODE SELECTION………………………………………………………….………… 7
4. SPEED DISPLAY……………………………………………………………………………...….. 8
5. KM/H & MPH………………………………………………………………………………...…… 8
6. BACKLIGHT INDICA TOR……………………………………………………………………..… 8
7. 6KM/H WORK...........................................................................................................................9
8. PAS LEVEL SELECTION..........................................................................................................9
9. ERROR CODE INDICA TOR......................................................................................................9
10. SET OPERA TION………………………………………………………………………………. 10
11. DISTANCE INDICA TOR………………………………………………………………………. 11
12. TRIP TIME INDICA TOR……………………………………………………………….………. 13
13. BA TTERY INDICA TOR………………………………………………………….…………….. 13
14. MOBILE PHONE CHARGING INDICA TOR……………………………………………....…. 14
15. CABLE DEFINITION………………………………………………………………………….. 14
16. AUTO SLEEP AFTER 5 MINUTES…………………………………………………...……… .15
COMMON PROBLEMS & SOLUTIONS……………………………………………….....….….. 15
QUALITY & W ARRANTY…………………………………………………………..…….......….... 15
QUALITY & W ARRANTY…………………………………………………………………………15
OTHER ITEMS …………………………………………………………………………………… 15
ERROR CODE TABLE…………......……………………………………..………………..…....…..16
p
age
2
ABOUT THE USER MANUAL
Dear users,
To ensure better performance of your e-bike, please read through the
C500-LCD product introduction carefully before using it.
OUTLOOK AND SIZE
MATERIAL AND SIZE
C500B display is made of black ABS and the bracket is made of nylon
material. Operating temperature of 0F to 120F.
p
age
3
Dimension figure (unit: mm)
BUTTON DEFINITION
C500B has four buttons including ON/OFF、SET、UP and DOWN.
“ON/OFF” names to “ ”, “SET” names to “SET”;“UP” names to
“ ＋” and “DOWN” names to “－”.
p
age
4
FUNCTION SUMMARY
FUNCTION SUMMARY
C500B provides a wide range of functions and indicators to fit the users’
needs. The indicated contents are as below.
1.ON/OFF
2.Current display
3.
Riding mode selection - Optional Not Available On All Bikes
4.Speed display
5.KM/H & MPH
6.Backlight indicator
7.6KM/H work
8.PAS level selection
9.Error code indicator
10.SET operation
11.Distance indicator
11.1 Total distance (ODO)
11.2 Trip distance
11.3 Remaining distance (without this function by default
)
12.Trip time indicator
13.Battery indicator
p
age
5
13.1 Battery residual capacity indicator
13.2 Battery voltage
13.3 Battery capacity percentage (without this function by default)
13.4 Battery charging and discharging times (without this function
by default)
14.Mobile phone charging indicator
15.Cable definition
16.Auto sleep after 5 minutes
p
age
6
FULL VIEW AREA
NORMAL VIEW AREA
With the display on ,the default display are riding speed、ODO、PAS
level、battery indicator as show in fig below. Press SET to switch the
display information. In turn shows: ODO, trip distance and trip time.
p
age
7
NORMAL OPERATION
1.ON/OFF
Hold ON/OFF and start the display. The display will provide power
for the controller. Hold ON/OFF again can open the backlight. With
display on, press ON/OFF for 3 seconds to turn off the power. With the
display off, there is no battery consumption battery power. The leakage
current is no more than 2µA.
※ The panel will go to sleep when the speed is 0 km/h for 5 minutes.
2.CURRENT DISPLAY
That represents the discharging current of the controller currently, each
mark is 2A, six segments is >=12A.
3.
RIDING MODE SELECTION- Optional Not Available
On All Bikees
There are three modes for riding with arrow selection, including
POWER，NORMAL and ECO. The default option is NORMAL.
p
age
8
4.SPEED DISPLAY
The speed display is as below，and user can select KM/H or MPH in
SET4.
5.KM/H & MPH
Select KM/H or MPH for the speed and mileage, display will be to the
currently selected units display.
6.BACKLIGHT INDICATOR
With the power on, click the ON/OFF and turn on the backlight. Click it
again and turn off the backlight.
p
age
9
7.
6KM/H Walking Cruise Control
Hold the DOWN(-)for 2 seconds to get in 6km walking mode to work, and
when you release the button the walking mode will stop The display is as
below.
8.PAS LEVEL SELECTION
Click UP or DOWN to change the stages and output power ratio, the
default mode is mode 6 and it’s output power range from level 1 to level 5
The default value is level 1.
9.ERROR CODE INDICATOR
If there is something wrong with the electronic control system, the
display will flash at 1 HZ and show the error code automatically. See the
Otros manuales para C500B-LCD
3
Tabla de contenidos
