DashLink Install Guide - Page 6
Step 5: Congure BigRoad Truck for DashLink
Launch the BigRoad application on an Android device and sign in to
your fleet.
If the vehicle has previously been added to the BigRoad account for
your fleet, then ensure it is selected in the mobile app by pressing the
menu button, choosing “Switch Truck” and selecting the truck.
Otherwise add a new truck:
a. Press the menu button
b. Choose “Switch Truck”
c. Press “Add”
d. Enter the correct truck number,
license plate and odometer
units (miles/km)
e. Press “Add Truck”
Navigate to the DashLink screen by pressing the menu button,
choosing “Settings”, then “DashLink”.
Turn on the vehicle.
Press “Connect DashLink”.
Ensure the DashLink device is found and the VIN that is shown
matches the VIN of the vehicle. If no VIN is shown then ensure the
device ID that is shown matches the value printed on the DashLink
device. If the VIN or device ID does not match then choose “Skip”
until the correct DashLink device is shown.
1
2
3
4
5
6
