Bigblu EASY MOUNT SYSTEM Manual de usuario
SELF-INSTALL GUIDE
WITH EASY MOUNT
SYSTEM
2
THE EASY MOUNT SYSTEM
Please note Easy Mount system may differ from image
3
For any help with your self-install please call bigblu technical support:
01869 222 900
BUILDING THE EASY MOUNT SYSTEM
Option 1
Included with your Easy Mount System - Option 1:
Bolt kit that includes :
Slab trays (A) x2
Pole (B) x1
Pole braces (C) x2
Bolt (1) X2
Bolt (2) X2
Bolt (3) X4
Please note that this kit does not include cement slabs.
4
ASSEMBLY OF THE EASY MOUNT SYSTEM
Option 1
To assemble the base of the mount, place the two slab trays (A) on either
side of the pole (B) with the holes at the base of the pole
matching up with the trays.
Once you have assembled the baseplates you will need to add the
pole braces to secure the base plate and pole together.
Lean both braces on the pole and secure them together using both of
screws (set 2).
Now use Screw (set 1) to secure the braces to the base plate.
Once everything is secure and all nuts are tightened, your Easy Mount
System will be complete and assembly of the Dish Kit can commence.
5
BUILDING THE EASY MOUNT SYSTEM
Option 2
Included with your Easy Mount System - Option 2:
1 x Pole
2 x Baseplates
2 x Bolts
6
To build the mount, place the pole in-between the two base plates and se-
cure with the two bolts provided.
There is a 2nd installation option by using only 1 baseplate.
To build the mount place the pole in the middle of the base plate and secure
with the two bolts provided.
ASSEMBLY OF THE EASY MOUNT SYSTEM
Option 2
7
Open the Dish Kit box and nd the back plate (C), the back bracket (B)
and the dish bracket (A). Refer to the picture on the right.
Place the dish plate (C) on the inside of the dish bracket (A) and using the
curved end screws, attach the back bracket (B) to the plate
securing the dish bracket (A) in the middle of the two.
Ensure that the back bracket (B) is upright by checking that the
engraved numbers on the side are upright
Use all 4 of the (set3) screws to secure the base in place.
Add the pole mounting brackets to the back bracket
(B)
ASSEMBLY OF THE DISH
8
Once the mounting bracket is
secured, attach the dish bracket to
the Easy Mount System.
Tighten the screws on the mounting
bracket, so that the dish can still
move slightly left and right. Tighten
and secure it later after the dish has
been pointed.
Now attach the dish face to the dish
bracket.
Simply do this with the ve
rounded edged screws, line up the
holes in the dishface with the holes
in the bracket and secure tightly.
Once the dish face is
attached, the E-TRIA mounting arm
needs to be attached.
Now attach the dish face to the dish
bracket. Simply do this with the ve
rounded edged screws, line up the
holes in the dishface with the holes
in the bracket and secure tightly.
Themountingpoleisthelongrounded
metal pole. Insert the rectangular
end into the bottom of your dish
bracket and secure tight with the 4
edged bolts.
9
Now the dish is built.
Attach the E-TRIA to the end of the dish, along with the coax cable that
runs through the arm of the dish.
Run one end of the coax cable through the back of the E-TRIA arm and
push it all the way into the front so it is pointing out, connect your E-TRIA
to the cable by screwing in the end of the coax cable into the E-TRIA.
Slot the E-TRIA into the end of the TRIA arm and tighten with the two
screws provided in the E-TRIA box on the bottom of the E-TRIA arm pole.
Once you have done this, your dish installation is complete and you now
need to start with the modem installation and dish pointing.
10
Before you can proceed with the installation you will need the
following information:
POINTING THE DISH
Spot beam colour
Elevation angle
Azimuth degrees
All of this information can be found at the following website
http://nder.tooway-instal.com or by using the KaSat Finder App
(Available on both IOS and Android free of charge). Please note: if you do
not have a internet connection these applications will not work.
If you call the bigblu ofce one of our friendly staff members will be able to
get this information for you.
Tabla de contenidos
