BiAL ILS Manual de usuario
ITEN ES FR HRDE SL SRRU
User Manual
Electric Heang Element
Electric Heang Element
Gebrauchsanweisung — Elektroheizpatrone | Manual de usuario — Elemento calefactor
Gebrauchsanweisung — Elektroheizpatrone | Manual de usuario — Elemento calefactor
eléctrico | Mode d’emploi — Kit résistance électrique | Upute za upotrebu — Električni
eléctrico | Mode d’emploi — Kit résistance électrique | Upute za upotrebu — Električni
grijač | Manuale d'uso — Elemento Elerico Riscaldante | Инструкция по применению
grijač | Manuale d'uso — Elemento Elerico Riscaldante | Инструкция по применению
— Электронагреватель | Navodila za uporabo — Električni grelec | Uputstva za upotrebu
— Электронагреватель | Navodila za uporabo — Električni grelec | Uputstva za upotrebu
— Električni grejač
— Električni grejač
ILS
3
EN
User Manual
Our products have been designed and manufactured in such a way to ensure
that all quality, functionality and aesthetic requirements are met. We would
like to congratulate you on the purchase of this great product and wish you
a pleasant experience with it.
Electric radiator
Guide to safe installation anduse.
1. Do not install the heater under an electrical socket point.
2. Your electric heater should be lled with a carefully measured amount of
liquid. In the case of loss of heating medium, or in any other case which
demands its supplementation, contact your supplier.
3. The device is not equipped with an external temperature controller.
Do not use the device in a small room if unsupervised disabled or inca-
pacitated individuals are inside it. Only use the device if those individu-
als are under constant supervision.
4
4. Electric heater is not a toy. Children under the age of 3 should not be al-
lowed within close proximity of the device without the supervision of an
adult.
Children aged 3 to 8 should only be allowed to operate the heater when
it has been properly installed and connected. The child must be under
adult supervision or have been trained to safely operate the device while
understanding the risks.
5. Note: Some parts of the radiator can be very hot and can cause burns. Pay
special attention to the presence of children or people with disabilities.
6. If the device is used as a clothes and towel dryer, ensure that the fabrics
drying on it have only been washed in water, avoiding contact with any
harsh chemicals.
7. To ensure the safety of very small children, install the electric dryer so
that the lowest tube is at least 600mm above the oor.
8. The device should only be installed by a qualied installer in accordance
with the applicable regulations regarding safety and all other regulations.
9. All installations to which the device is connected should comply with reg-
ulations applicable in the country of installation and use.
10. Extension leads or electric plug adapters should not be used in order to
supply power to the heater.
5
EN
11. While connecting the radiator to electric installation ensure that the cur-
cuit has a 30 mA residual-current circuit breaker and an appropriate over-
current circuit breaker. With the permanent installation (cable connec-
tion without plug) it is also mandatory to have an omni-pole cut-out for
disconnecting the device on all poles, by points of contact with the clear-
ance of 3 mm.
12. The device version labelled PB can be installed in bathrooms in zone 1,
as dened by applicable law, subject to any additional regulations con-
cerning electrical installations in wet areas.
Other versions of the device can be installed in Zone 2 or beyond.
13. The device is recommended for use solely as described in the manual.
14. Ensure that the heater has been installed on a wall in accordance with
its installation manual.
15. Please forward this instruction manual to the end user.
6
Zone 1
Zone 2
7
EN
Electric Heating Element
Safety requirements — installation
1. Fitting and connection of the heating element should only be performed
by a qualied installer.
2. Connect the unit to a sound electrical installation (see the ratings on the
heater).
3. Ensure that the power cord does not touch the hot parts of the heating
element or radiator.
4. Before installing or removing the device, make sure it is disconnected
from the power source.
5. Do not open the device — any interference with internal components
will invalidate the warranty.
6. The heating element’s power output must not exceed the radiators pow-
er output for the parameters 75/65/20° C.
7. The pressure in the radiator should not exceed 10atm. Ensure that an
air cushion is preserved in electric radiators. In central heating systems,
leave one valve open to prevent pressure build up due to the thermal
expansion of the liquid.
8
8. The device is intended for home use only.
9. Fitting and Installation of the device must be carried out in accordance
with all local regulations for electrical safety, including installation within
permissible locations only. Observe bathroom electrical zone regulations.
Safety requirements — use
1. The heating element must be fully submerged in the heating liquid dur-
ing its operation.
2. Regularly check the device for damage to ensure it is safe to use.
3. If the power cord is damaged the device should not be used. Unplug the
device and contact the manufacturer or distributor.
4. Do not allow ooding into the heating element casing.
5. The heating element and radiator can heat up to high temperatures. Please
be cautious — avoid direct contact with the hot parts of the equipment.
6. Do not open the heating element casing.
7. In the central heating system, always make sure that one valve of the ra-
diator remains open.
9
EN
8. Ensure that minors aged 8 and above or those with a physical or mental
disability are supervised if operating the device.
9. The device is not a toy. Keep it out of the reach of children.
10. The device must be disconnected from the mains during cleaning and
maintenance.
11. Cleaning of the equipment by children under 8years of age is only per-
mitted under appropriate supervision.
10
Intended use of device
The heang element is an electric device
intended solely for installaon in radiators
(standalone or connected to the central
heang system).
Heang element power output should be
matched with radiator output for parame-
ters of 75/65/20° C
Technical informaon
Model markings
(power cable type):
PB (Straight cable without plug) *
Type of electrical connecon: Y
Power supply: 230 V / 50 Hz
Insulaon class: Class II
Towel rail connecon thread: G 1/2"
Casing protecon class [IP]: IPx5
The maximum pressure allowed
in the radiator:
1.0 MPa
Length of heang element: 400 600 800 1000 [W]
350 465 600 670 [mm]
* Device intended to be connected permanently to the system
Otros manuales para ILS
1
Tabla de contenidos
Idiomas:
Otros manuales de Calentador de BiAL
Manuales populares de Calentador de otras marcas
Empire Heating Systems
Empire Heating Systems WCC65 Manual de usuario
Wetekom
Wetekom 92 86 43 Manual de usuario
Desa
Desa SPC170-F Manual de usuario
Watlow
Watlow Watrod Electric Tubular Heaters Manual de usuario
Haverland
Haverland ECO-DRY GPS Series Manual de lista de piezas
Stelpro
Stelpro ASILVC2060 Series Manual de usuario