Example:
For gates on step-by-step operation, to automatically close every night at 10pm send SMS:
1234#1#sun,mon,tue,wed,thu,fri,sat#2200#
For gates on automatic closing, to hold open between 8am and 7pm, send SMS:
1234#2#sun,mon,tue,wed,thu,fri,sat#0800# and then a second SMS:
1234#3#sun,mon,tue,wed,thu,fri,sat#1900#
Note: Up to 40 events can be stored.
Delete ALL Automatic Triggering times
1234*#
Notification Number
This feature will send a SMS notification to a master user phone number every time the intercom
is used to grant access. It will send a SMS any time a relay is activated.
To use this feature firstly turn the function on:
9999#802# (change 2to 1to disable again).
Now you must store the phone number which is to receive the notification:
9999#78number#
Now you may store a customised SMS content, which will be sent to the stored number:
9999#79enter any text here#
For example, you may wish to store the following message “My Gates Triggered”, or “Gates
Opened”.
Programming as an Alarm Dialling Device
This advanced GSM unit is also able to be used as a GSM alarm device. If the input terminals are
triggered with a closing connection, the device will call up to 4 phone numbers in sequence.
