Betstco FHM WCX52 Guía de aplicación
Specificationssubjecttochangewithoutnotice.
Rugged Labor Saving Equipment Since 1995
OPERATION & PARTS MANUAL
Please read these instructions carefully before using! Always grease all
fittings and be sure to always check and fill with oil before operating!
Retain this manual for future reference.
Specificationssubjecttochangewithoutnotice.
WCX52 WOOD CHIPPER
F
ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
Contact our support desk for any questions or concerns at
(541)895-3083
1 INTRODUCTION
Congratulations on your choice of a Farmer Helper 3 Point Hitch Wood Chipper to compliment your
operation. This equipment has been designed and manufactured to meet the needs of a discerning timber
or landscaping industry.
Safe, efficient and trouble free operation of your Farmer Helper Wood Chipper requires that you and
anyone else who will be using or maintaining the chipper, read and understand the Safety, Operation,
Maintenance Trouble Shooting information contained within the Operator's Manual.
WCX5
This manual covers the Farmer Helper 3 Point Hitch Wood Chipper WCX52 Use the Table of
Contents or Index as a guide to locate required information.
Keep this manual handy for frequent reference and to pass on to new operators or owners.
OPERATOR ORIENTATION - The directions left, right, front and rear, as mentioned throughout this
manual, are determined when sitting in the tractor driver's seat and facing in the direction of travel.
2 SAFETY
SAFETY ALERT SYMBOL
This Safety Alert symbol means
ATTENTION! BECOME ALERT!
YOUR SAFETY IS INVOLVED!
The Safety Alert symbol identifies
important safety messages on the
Farmer Helper 3 Point Hitch Wood
Chipper and in the manual. When
you see this symbol, be alert to
the possibility of personal injury or
death. Follow the instructions in the
safety message.
Why is SAFETY important to you?
3 Big Reasons
Accidents Disable and Kill
Accidents Cost
Accidents Can Be Avoided
SIGNAL WORDS:
Note the use of the signal words DANGER,
WARNING and CAUTION with the safety
messages. The appropriate signal word for
each message has been selected using the
following guide-lines:
DANGER - Indicates an imminently hazardous
situation that, if not avoided, will
result in death or serious injury. This
signal word is to be limited to the
most extreme situations typically for
machine components which, for
functional purposes, cannot be
guarded.
WARNING - Indicates a potentially hazardous
situation that, if not avoided, could
result in death or serious injury, and
includes hazards that are exposed
when guards are removed. It may
also be used to alert against unsafe
practices.
CAUTION - Indicates a potentially hazardous
situation that, if not avoided, may
result in minor or moderate injury. It
may also be used to alert against
unsafe practices.
SAFETY
YOU are responsible for the SAFE operation and
maintenance of your Farmer Helper 3 Point Hitch
Wood Chipper. YOU must ensure that you and
anyone else who is going to use, maintain or work
around the 3 Point Hitch Wood Chipper be familiar
with the using and maintenance procedures and
related SAFETY information contained in this
manual. This manual will take you step-by-step
through your working day and alerts you to all good
safety practices that should be used while using the
3 Point Hitch Wood Chipper.
Remember, YOU are the key to safety. Good safety
practices not only protect you but also the people
around you. Make these practices a working part of
your safety program. Be certain that EVERYONE
using this equipment is familiar with the
recommended using and maintenance procedures
and follows all the safety precautions. Most
accidents can be prevented. Do not risk injury or
death by ignoring good safety practices.
• 3 Point Hitch Wood Chipper owners must give
operating instructions to operators or employees
before allowing them to operate the machine,
and at least annually thereafter.
• The most important safety device on this
equipment is a SAFE operator. It is the
operator’s responsibility to read and understand
ALL Safety and Operating instructions in the
manual and to follow these. Most accidents can
be avoided.
• A person who has not read and understood all
using and safety instructions is not qualified to
use the machine. An untrained operator
exposes himself and bystanders to possible
serious injury or death.
• Do not modify the equipment in any way.
Unauthorized modification may impair the
function and/or safety and could affect the life
of the equipment.
• Think SAFETY! Work SAFELY!
2.1 GENERAL SAFETY
1. Read and understand the
Operator’s Manual and all
safety signs before using,
maintaining, adjusting or
cleaning the
3 Point Hitch Wood Chipper.
2. Have a first-aid kit available for
use should the need arise and
know how to use it.
3. Have a fire extinguisher
available for use should the
need arise and know how to
use it.
4. Do not allow riders.
5. Wear appropriate
protective gear. This list
includes but is not
limited to:
- A hard hat -
Protective
shoes with slip
resistant soles
- Protective glasses,
goggles or face shield -
Heavy gloves
- Wet weather gear
- Hearing Protection
- Respirator or filter mask
6. Install and secure all guards
before starting.
7. Wear suitable ear protection for
prolonged exposure to
excessive noise.
8. Turn machine off, stop and
disable engine, remove ignition key and place
in your pocket, set park brake and wait for all
moving parts to stop before servicing, adjusting,
repairing or unplugging.
9. Clear the area of people, especially small
children, before using the unit.
10. Review safety related items annually with all
personnel who will operating or maintaining the
3 Point Hitch Wood Chipper.
2.2 EQUIPMENT SAFETY GUIDELINES
1. Safety of the operator and bystanders is one of
the main concerns in designing and developing
equipment. However, every year many
accidents occur which could have been avoided
by a few seconds of thought and a more careful
approach to handling equipment. You, the
operator, can avoid many accidents by
observing the following precautions in this
section. To avoid personal injury or death, study
the following precautions and insist those
working with you, or for you to follow them.
2. In order to provide a better view, certain
photographs or illustrations in this manual may
show an assembly with a safety shield removed.
However, equipment should never be used in
this condition. Keep all shields in place. If shield
removal becomes necessary for repairs, replace
the shield prior to use.
3. Replace any safety sign or instruction sign that
is not readable or is missing. Location of such
safety signs is indicated in this manual.
4. Never use alcoholic beverages or drugs which
can hinder alertness or coordination while using
this equipment. Consult your doctor about using
this machine while taking prescription
medications.
5. Under no circumstances should young
children be allowed to work with this
equipment. Do not allow persons to use or
assemble this unit until they have read this
manual and have developed a thorough
understanding of the safety precautions and
of how it works. Review the safety instructions
with all users annually.
6. This equipment is dangerous to children and
persons unfamiliar with its operation. The
operator should be a responsible, properly
trained and physically able person familiar with
machinery and trained in this equipment's
operations. If the elderly are assisting with work,
their physical limitations need to be recognized
and accommodated.
7. Never exceed the limits of a piece of machinery.
If its ability to do a job, or to do so safely, is in
question - DON'T TRY IT.
8. Do not modify the equipment in any way.
Unauthorized modification may result in serious
injury or death and may impair the function and
life of the equipment.
9. In addition to the design and configuration of this
implement, including Safety Signs and Safety
Equipment, hazard control and accident
prevention are dependent upon the awareness,
concern, prudence, and proper training of
personnel involved in the operation, transport,
maintenance, and storage of the machine. Refer
also to Safety Messages and operation
instruction in each of the appropriate sections of
the tractor and machine manuals. Pay close
attention to the Safety Signs affixed to the tractor
and the machine.
Tabla de contenidos
Otros manuales de Alegre de Betstco
