
Installation Preparation
03
Important Tips:
Bestsin cameras can only be set up with 2.4G Wi-Fi network. (First,
the cameras set up with 2.4G Wi-Fi network, then it's ok to use both
4G Date and Wi-Fi to live viewing.)
You may possibly need a Wi-Fi extender when it is long between the
camera and Wi-Fi transmitter.
Before installing the micro SD card make sure the camera powered
off. (Micro SD card is not included in the package)
Please charge the battery at the side of the solar panel before
installation(using the extra 8 feet USB cable in the package), may
take up to 6-8 hours to charge fully.
Please pair the camera before installing outside and make sure the
distance between your cell phone, router and the camera is no more
than 1.5 feet(will make pairing esier).
Please do not install the camera on a soft wall or soft wood, it may
cause shaking when windy and rainy.
The PIR range is 18 feet around, we recommend camera install
height is 9 feet to avoid too many false alarms, we suggest you do
not install the camera with nearby bushes, shrubs and tree leaves
caming into the PIR range as this may trigger false alarms.
1
2
3
4
5
6
7