BestScope BS-2046 Manual de usuario
BS-2046 Biological Microscope
Instruction Manual
BS-2046B
This manual is for BS-2046 series biological microscopes. To ensure your safety, obtain optimum
performance, and to familiarize yourself fully with the use of this microscope, we recommend
that you learn the instruction manual carefully before using the microscope.
BestScope International Limited
1
Contents BS-2046
User Notices........................................................................................ 2
1. Components Name........................................................................ 4
2. Structure Overview....................................................................... 5
3. Installation.................................................................................... 7
3-1 Installing Diagram ..................................................................................7
3-2 Installing Steps .......................................................................................8
3-2-1 Installing the viewing head ...........................................................8
3-2-2 Installing the eyepiece..................................................................8
3-2-3 Installing the condenser................................................................8
3-2-4 Installing the objective..................................................................9
3-2-5 Install the filter.............................................................................9
3-2-6 Connecting the power pord ........................................................10
4. Adjustment And Operation..........................................................11
4-1 Turn on the power................................................................................11
4-2 Adjust the brightness and color temperature.......................................11
3-3 Mount and move specimen..................................................................12
4-4 Adjust interpupillary distance...............................................................13
4-5 Diopter adjustment ..............................................................................13
4-6 Adjusting the condenser.......................................................................13
4-7 Focusing ...............................................................................................14
4-8 Focusing upper limit.............................................................................14
4-9 Adjust the tightness of the focusing hand-wheel..................................14
5. Technical specification .................................................................15
6. Troubleshooting Guide.................................................................16
BestScope International Limited
2
User Notices BS-2046
I. Safety Symbols
II. Safety Notes
1. Open the box carefully to avoid the accessories, like lens, being polluted by fingerprint or
sweat strain, dropping to ground and being damaged.
2. Do keep the instrument out of direct sunlight, high temperature or humidity, dusty and easy
shaking environment. Make sure the stage is smooth, horizontal and firm enough.
3. When moving the microscope, one hand hook into the bottom slot front of the frame, and
the other hand hold the rear end of the cross beam.
4. If the bacterium solution or the water splash to the stage, objective or viewing tube, pull out
the power cord at once, and wipe up the microscope. Otherwise, the instrument will be
damaged.
5. Be sure to keep at least 10cm away from the left, right, top, rear of the microscope from
walls and other objects, so as not to plug natural convection air, which is used for cooling.
6. Make sure the instrument is earthed, to avoid lightning strike.
7. Check the input voltage: be sure the input voltage which signed in the back of the
microscope is consistent with the power supply voltage, or it will bring a serious damage to the
instrument.
Symbol
Meaning
Main power switch is on
Main power switch is off
The WEEE flag, discarding this product must be sent to the appropriate facility
for recycling and recycling.
Represents the focusing limiting knob direction, “ADJUST”: adjust the upper
limit, “SET”: locks the upper limit
Represents the tension adjustment collar direction, “+”: tightening the collar,
“-”: loosing the collar
Light intensity and color temperature direction. Turn toward the tip, the light
intensity and color temperature changes from strong to weak
Pass CE
BestScope International Limited
3
BS-2046
III. Maintenance
1. All the lenses have been well checked and adjusted. It is forbidden to disassemble them by
yourself.
2. The nosepiece, coarse and fine focusing parts are so delicate that it is forbidden to
disassemble them carelessly by yourself.
3. Keep the instrument clean, wipe dust regularly, and be attention to avoid contaminating the
optical elements especially. The objective lenses should be cleaned every month by professional.
4. We can clean the contaminations such as fingerprints and oil smudges on the prism by using
the tissue paper and solution, which is mixed by ether (70%) and alcohol (30%).
Noting that alcohol and ether are highly flammable, do keep them away from the fire or
potential sources of electrical sparks, and use them in a drafty room as possible as you can.
5. Don’t use organic solvent to wipe the non-optical elements, when you need to clean, use
the soft detergent, please.
6. When using, if the microscope is splash by liquid, cut off the power at once, and wipe up the
moisture.
7. Do not disassemble any parts of the microscope. That will affect the function or decline the
performance of the microscope.
8. Place the instrument in a cool, dry position. After using the microscope, remember to cover
it with dust helmet.
BestScope International Limited
4
1. Components Name BS-2046
Objective
Eyepiece
Viewing Head
Condenser
Nosepiece
Main Body
Stage
BestScope International Limited
5
2. Structure Overview BS-2046
1
2
3
4
5
6
1. Left fine focus knob
2. Left coarse focus knob
3. Focusing limiting knob
handwheel
4. Main switch
5. Display screen
6. Aperture diaphragm adjustment
BestScope International Limited
6
BS-2046
1. Fixing screw for Viewing Head
2. Fixing screw for condenser
3. X direction adjustment knob
4. Y direction adjustment knob
5. Brightness and color temperature adjustment knob
6. Right fine focus knob
7. Right coarse focus knob
8. Tension adjustment collar
9. Power socket
10. Anti-theft lock hole
1
3
4
5
6
7
8
9
2
10
BestScope International Limited
7
3.Installation BS-2046
3-1 Installing Diagram
The following figure shows the installation sequence of the components. The number in the
figure shows the assembly steps.
Before installing, be sure every component is clean, do not score any parts or glass
surface.
Keep well with hexagon wrench provided. When replacing the components, you will need
it again.
`
①
②
③
④
BestScope International Limited
8
BS-2046
3-2 Installation Steps
3-2-1 Installing the viewing head (Fig.1)
Install the viewing head into the microscope
circular swallow tail by the path ① shown in
Fig.1, tighten the auxiliary screw and turn it to
the proper position, then fix up it by bolt.
3-2-2 Installing the eyepiece (Fig.2)
Insert the eyepieces into the eyepiece tube
until they are against each other according to the
path ②shown in Fig.2.
3-2-3 Installing the condenser (Fig.3)
Place the condenser in right place so that
the adjustment position mark of the aperture iris
diaphragm faces front. Then tighten two screws
to fix up the condenser.
Fig.1
Fig.2
Fig.3
Fastening screw for condenser
screw
Auxiliary screw
①
②
BestScope International Limited
9
BS-2046
3-2-4 Install the Objective (Fig.4)
1. Adjust the coarse &fine focus knob, till the
mechanical stage to the low limited place.
2.The objective with the lowest
magnification rate is twisted to the nosepiece
from the left or right side, then push the
objective nosepiece clockwise, Install other
objective lenses in order from low to high
magnification. (The objective magnification shall
be consistent with the show on the display, and
the product was installed at the factory).
Clean the objective frequently.
At first, use the 10X objective to looking for
image, then change another one.
Turn the objective till hear the “click” sound,
make sure the objective enter the objective
center.
3-2-5 Install the Filter (Fig.5)
Put the filter in the seat of illuminator
according to the path ①shown in Fig.5 .
The standard filter is green.
Fig.4
Fig.5
①
Tabla de contenidos
Otros manuales de Microscopio de BestScope
BestScope
BestScope BS-2010BD Manual de usuario
BestScope
BestScope BS-3012 Series Manual de usuario
BestScope
BestScope BS-6012 Series Manual de usuario
BestScope
BestScope BLM-210 Manual de usuario
BestScope
BestScope BS-7000B Manual de usuario
BestScope
BestScope BS-3040 Manual de usuario
BestScope
BestScope BS-6024RF Manual de usuario
BestScope
BestScope BS-2082 Series Manual de usuario
BestScope
BestScope BLM-205 Manual de usuario
BestScope
BestScope BS-3015 Series Manual de usuario
BestScope
BestScope BS-6022RF Manual de usuario
BestScope
BestScope BS-2094 Series Manual de usuario
BestScope
BestScope BS-2092 Manual de usuario
BestScope
BestScope BS-7000A Manual de usuario
BestScope
BestScope BS-2052BDBD Manual de usuario
BestScope
BestScope BS-6030 Manual de usuario
BestScope
BestScope BS-3010A Manual de usuario
BestScope
BestScope BS-2040FB(LED) Manual de usuario
BestScope
BestScope BS-3003 Manual de usuario
BestScope
BestScope BPM-620 Manual de usuario
Manuales populares de Microscopio de otras marcas
VWR
VWR VisiScope 384 Series Manual de usuario
Nikon
Nikon ECLIPSE E200 POL Manual de usuario
Leica
Leica DI C800 Manual
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Manual de usuario
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Manual de usuario
Olympus
Olympus SZ61 Manual de usuario