01 02
1. Safety Information
Thank you for purchasing and using the DLB wireless device of BENY. This document contains important
instructions and warnings to follow when using and maintaining DLB wireless devices. To help you use
this product correctly, please read this manual carefully before charging.
DLB Wireless Device DLB Wireless Device
Warning
Supervise the operation of the device around children.
Use DLB wireless device only within the specified operating parameters.
Please read this mandatory document in full before using DLB wireless device.
Stop using the DLB wireless device which is defective, fractured, worn, broken or otherwise damaged
or inoperable, and do not use the charger.
Do not install or use DLB wireless devices near flammable, explosive, irritating or combustible
materials, chemicals or steam.
Do not attempt to disassemble, repair, tamper with, or modify DLB wireless device. Please contact the
user for any repair or maintenance.
Do not touch the terminals of the DLB wireless device with sharp metal objects, such as wires, tools,
or needles.
Please confirm whether the charger parameters match the DLB wireless device before use, otherwise
it may be unusable.
Do not insert foreign matter into any part of the DLB wireless device.
Do not forcibly fold or press any part of the DLB wireless device, or damage the DLB wireless device
with sharp objects.
Notes
There shall be no strong signal interference around the operating device.
This product does not contain any part that can be maintained by users. Please do not try to repair
and maintain it yourself.
When there is a linear communication barrier, the communication distance will be attenuated
accordingly.
Do not operate the device at temperatures outside the working range of -30 to + 55 . ℃ ℃
If there is a metal object near the antenna or the device is placed in a metal shell, the signal will be
attenuated significantly.
If the device cannot be used normally according to this operation manual, please contact the dealer for
repair or replacement.
This product is only applicable to the EV charger.
2. Product Introduction
2.1 Product appearance
DLB wireless device is designed according to EN 61010-1, EN61000-6 standard, with one end built in
charging pile, and the other end connected with DLB through network cable and placed externally
through the guide rail. DLB wireless device can solve the wiring trouble and realize long-distance data
sending and receiving.
External device (BCP-W485-DLB)
Built-in device (BCP-W485-EV)
