3500/42 Proximitor/Seismic Monitor Module
iv
Contents
1. Receiving and Handling Instructions 1
1.1 Receiving Inspection 1
1.2 Handling and Storing Considerations 1
2. General Information 2
2.1 Triple Modular Redundant (TMR) Description 3
2.2 Available Data 4
2.2.1 Statuses 4
2.2.2 Proportional Values 8
2.3 LED Descriptions 9
3. Configuration Information 10
3.1 Software Configuration Options 10
3.1.1 Proximitor/Seismic Monitor Configuration Options 10
3.1.2 Radial Vibration Channel Options 14
3.1.3 Thrust Position Channel Options 24
3.1.4 Differential Expansion Channel Options 33
3.1.5 Eccentricity Channel Options 39
3.1.6 Acceleration Channel Options 47
3.1.7 Velocity Channel Options 57
3.2 Setpoints 66
3.3 Software Switches 70
4. I/O Module Descriptions 72
4.1 Setting the I/O Jumper 72
4.2 Proximitor/Seismic I/O Module (Internal Termination) 77
4.3 Proximitor/Seismic Internal Barrier I/O Module (Internal Termination) 78
4.3.1 Wiring Euro Style Connectors 79
4.4 External Termination I/O Modules 80
4.4.1 Proximitor/Seismic I/O Module (External Termination) 80
4.4.2 Proximitor/Seismic TMR I/O Module (External Termination) 81
4.4.3 External Termination Blocks 82
4.4.4 Cable Pin Outs 88
5. Maintenance 90
5.1 Verifying a 3500 Rack - Proximitor/Seismic Monitor Module 90
5.1.1 Choosing a Maintenance Interval 91
5.1.2 Required Test Equipment 91
5.1.3 Typical Verification Test Setup 92
5.1.4 Using the Rack Configuration Software 93
5.1.5 Radial Vibration Channels 96
5.1.6 Thrust Position and Differential Expansion Channels 125
5.1.7 Eccentricity Channels 135
5.1.8 Velocity Channels 148
5.1.9 Acceleration Channels 168
5.1.10 Verify Recorder Outputs 182
5.1.11 If a Channel Fails a Verification Test 183
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
