BenQ LW61ST Manual de usuario

Network Projector Operation Guide

Table of contents2

Ta b l e o f c o n t e n t s

Preparation.......................................................................................3

Connecting the projector with your computer ........................................3

Wired connection...................................................................................................................... 3

Wireless connection (for selective models)........................................................................ 4

QPresenter ......................................................................................7

Minimum system requirements.....................................................................7

Downloading QPresenter...............................................................................7

Installing QPresenter .......................................................................................7

For PC .......................................................................................................................................... 7

For MAC ...................................................................................................................................... 8

Using QPresenter.............................................................................................8

Controlling the projector remotely through

a web browser ............................................................................. 11

Using the web control lock..........................................................................18

Projecting computer screen contents .................................... 20

One projector displaying one computer screen .....................................20

One projector displaying screens of up to 4 computers ......................20

Up to 8 projectors displaying one computer screen .............................21

Up to 255 projectors displaying one computer screen

(for selective models) ....................................................................................21

Using the USB cable to display computer content

(for selective models) ....................................................................................22

Supported Resolutions ..................................................................................22

Using the Projection Login Code................................................................22

Using the USB Camera (for selective models) ........................................23

PJLink Commands........................................................................ 24

Preparation 3

Preparation

Your BenQ projector is equipped with the wired and/or wireless network function. You

can manage and control the projector from one or more remote computers using a web

browser when they are properly connected to the same local area network. You can also

sent the contents of your computer to the projector for projection using the QPresenter.

Connecting the projector with your computer

Wired connection

If you are in a DHCP environment:

1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector

and the other end to the RJ45 port on your Ethernet or router.

2. Do one of the following:

•PressNETWORK SETTING on the remote control. The Network

Settings page is displayed.

•PressMENU/EXIT and then press / until the SYSTEM SETUP:

Advanced menu is highlighted. Press to highlight Network Settings and

press MODE/ENTER. The Network Settings page is displayed.

3. Highlight Wired LAN and press MODE/ENTER.

4. Make sure the Status is Connect.

5. Press to highlight DHCP and press / to select On.

6. Press to highlight Apply and press MODE/ENTER.

7. Re-enter the Network Settings > Wired LAN page. The IP Address, Subnet

Mask, Default Gateway, and DNS settings will be displayed. Note down the IP

address displayed in the IP Address row.

If the IP Address still does not appear, contact your ITS administrator.

If you are in a non-DHCP environment:

1. Repeat steps 1-4 above.

2. Press to highlight DHCP and press / to select Off.

3. Contact your ITS administrator for information on the IP Address, Subnet Mask,

Default Gateway, and DNS settings.

Wired LAN

Laptop computer

Desktop computer

Projector

RJ45 cable

Preparation4

4. Press to select the item you want to modify and press MODE/ENTER.

5. Press / to move the cursor and the press / to enter the value.

6. To save the settings, press MODE/ENTER. If you do not want to save the settings,

press MENU/EXIT.

7. Press to highlight Apply and press MODE/ENTER.

After the above steps, your projector is now connected to your local area network and

ready to be accessed by any computer on the same local area network.

Wireless connection (for selective models)

1. Plug a BenQ wireless dongle (optional) to the USB Type A connector on the

projector.

2. Do one of the following:

•PressNETWORK SETTING on the remote control. The Network

Settings page is displayed.

•PressMENU/EXIT and then press / until the SYSTEM SETUP:

Advanced menu is highlighted. Press to highlight Network Settings and

press MODE/ENTER. The Network Settings page is displayed.

3. Highlight Wireless LAN and press MODE/ENTER.

4. Make sure the Status is Connect.

5. Make sure the SSID Display is On.

6. Make sure the SSID information is displayed. The default SSID is "NetworkDisplay".

7. Press to highlight Connection Mode and press / to select AP or

Infrastructure.

8. Press to highlight Apply and press MODE/ENTER.

Depending on the Connection Mode you selected, there are two ways to continue:

In the AP mode

The projector is able to operate as a wireless LAN access point, which is the default

setting of the projector. In this mode, the projector establishes a wireless LAN which

allows computers to connect to this specific wireless LAN.

1. Make sure the BenQ wireless dongle (optional) is plugged to the USB Type A

connector on the projector.

2. Press SOURCE to display the source bar and select Network Display to access

the SSID. The default SSID is "NetworkDisplay".

3. Search for this wireless LAN by the projector’s SSID from your computer.

Laptop computer

Desktop computer

Projector

Wireless dongle

Preparation 5

4. Click "Connect" in your wireless network connection window.

In the Infrastructure mode

In this mode, the projector is connected to the local area network wirelessly and ready to

be accessed by any computer on the same local area network.

1. Connect both the RJ45 cable to the RJ45 port and wireless dongle to the USB port

of the projector.

2. Make sure the projector is connected to the local area network through wired

connection. See "Wired connection" on page 3 for detail.

3. Enter the address of the projector in the address bar of your browser and press

Enter.

4. Open the Admin page of the Projector Network Display System and log in.

See page 16 for details.

5. Go to the Wireless LAN page and change the Connection mode to

Infrastructure mode.

Wired/wireless LAN

Laptop computer

Desktop computer

Projector RJ45 cable

RJ45 cable

Wireless dongle

Wireless

dongle

Preparation6

6. Click Search in the SSID row to list all the available wireless access points. Click the

desired SSID in the Search result list and click Apply.

7. Disconnect the RJ45 cable from the computer.

8. Select the same SSID from your computer.

9. Open QPresenter and search for the correct projector and click Connect.

QPresenter 7

QPresenter

QPresenter is an application running on the host PC. It helps connect your computer to an

available network projector and transfer the desktop contents and/or audio signal to the

network projector via local network connection.

Minimum system requirements

• Supported OS: Windows®XP 32 bit/64 bit, Windows®2003, Windows®7 32 bit/64

bit, Mac OS 10.5 and Mac OS 10.6.

• CPU: Intel Pentium 4, 3.0G CPU (for1:1audio output through projector’s speaker),

Core2 Duo 2.40GHz CPU (for broadcasting function)

• Memory: 1 GB (for1:1audio output through projector’s speaker) or 2GB (for

broadcasting function)

• Free HDD space: 32 MB or more

• Web browser: Internet Explorer version 7 or 8 (Java Plug-in should be installed and

JavaScript should be enabled.)

BenQ does not guarantee the compatibility in respective user environments. Different PC/notebook may have

different compatibility results.

Downloading QPresenter

There are several ways to do it:

• From the projector

The projector also provides QPresenter for Mac computers. If you are using a Mac computer, the projector

automatically provides Mac version of the QPresenter for you to download.

i. Connect the computer to the projector. See "Connecting the projector with

your computer" on page 3 for detail.

ii. Enter the address of the projector in the address bar of your browser and press

Enter.

iii. Open the Admin page of the Projector Network Display System.

iv. Click the Download icon.

• From the user manual CD (for selective models)

i. Insert the user manual CD that comes with your projector into your CD-ROM

drive.

ii. Download QPresenter-Broadcast.setup.

• From BenQ.com

i. Please go to your local BenQ.com to download the latest version of QPresenter.

Installing QPresenter

For PC

1. When the download is complete, click the exe file.

2. Click "Next" to continue.

3. Click "I agree" to agree the License Agreement.

4. Click "Next" to install the component.

QPresenter8

5. Click "Next" to confirm the installation path.

6. Set user name and password of Qpresenter and then click "Next".

7. Click "Install" to complete the process.

For MAC

1. When the download is complete, click the dmg file.

2. Double-click the file, and this will mount the disk image called QPresenter.

3. Double-click the disk image "QPresenter" in order to view the contents.

Using QPresenter

1. The Search page allows you to search and connect to a projector.

• To connect to a projector, type the projector IP address and click Connect.

• To search for projectors, simply click Search to list all the projectors on the

same local area network. Click the desired projectors in the Search result list,

and click Connect. You can also type a desired projector name and click Search.

• To play sound through the projector speaker, simply click Activate audio out.

Mac version of the QPresenter does not support this function.

2 5

QPresenter 9

2. The Special Feature page provides some advanced functions to manage the projected

images.

• To display a full screen, click Full Screen.

• To display a partial screen, click Selectable. A square appears on your screen.

You can adjust its size and place it where you want to project.

This function is not available when audio out is activated.

• To pause projection, click Pause.

• If there are multiple computers connected to the projector, you can decide a

display location by clicking 1, 2, 3, 4, L, R, or Full Screen.

3. The Basic Settings page allows you to configure QPresenter.

• To activate Remote Desktop function, cl i c k Ye s . Ty p e t h e n a m e a n d p a s s w o rd

for your computer. Go to the projector OSD menu SYSTEM SETUP:

Advanced > Network Settings > Remote Desktop, and enter Account

(the name for your computer) and Password, and highlight Connect, press

MODE/ENTER.

QPresenter10

• The QPresenter only accepts up to 8 characters consisting of English

capitalized letters and digits 0-9 for the name, full 6 digits consisting of 1 to 4

for the password.

• To change the QPresenter interface language, click the down arrow to reveal a

drop-down list and select a desired language. Click Apply.

• To allow notification messages to appear, click Yes. Click Apply.

• To display your computer screen on multiple projectors, click Activate 1:N

Display. Click Apply. It can display up to 8 projectors at the same time.

4. The Advanced Settings page allows you to configure QPresenter.

• To display still pictures, click the down arrow to reveal a drop-down list and

select Graphic. Click Apply. To display video clips, click the down arrow to

reveal a drop-down list and select Video. Click Apply.

Graphic mode: worse image quality but faster transmission speed.

Video mode: better image quality but slower transmission speed.

However, the actual transmission speed was determined by the network traffic

at that time.

• To adjust the capture rate, move the slide bar. The network bandwidth may

also affect the performance.

• To launch QPresenter when your computer operating system is started, click

Yes for Boot and launch. Click Apply.

• To utilize the broadcasting function, see "Up to 255 projectors displaying one

computer screen (for selective models)" on page 21 for details.

• To link to the Projector Network Display System web page, click Link.

5. Disconnect

To disconnect from the projector(s), click the Disconnect icon.

• Be sure to turn off other virtual network control programs before using QPresenter.

• Firewall in the PC must be switched off to allow QPresenter and USB Display to work.

• Wireless keyboard mouse combo is not supported by Pixelworks currently.

Otros manuales para LW61ST

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Proyector de BenQ

BenQ

BenQ TK860 Manual de usuario

BenQ

BenQ MX520 Manual de usuario

BenQ

BenQ W1600UST Manual de usuario

BenQ

BenQ MP780 ST Manual de usuario

BenQ

BenQ CinePrime Series Manual de usuario

BenQ

BenQ BH3002 Manual de usuario

BenQ

BenQ QSG-3 Series Manual de usuario

BenQ

BenQ MX812ST Manual de usuario

BenQ

BenQ MP523 - XGA DLP Projector Manual de usuario

BenQ

BenQ L720D Series Manual de usuario

BenQ

BenQ Mainstream MP770 Manual de usuario

BenQ

BenQ MX863UST Manual de usuario

BenQ

BenQ LU960UST Manual de usuario

BenQ

BenQ W1400 Manual de usuario

BenQ

BenQ LU9245 Manual de usuario

BenQ

BenQ MX661 Manual de usuario

BenQ

BenQ LK990 Manual de usuario

BenQ

BenQ EP5920 Manual de usuario

BenQ

BenQ MW721 Manual de usuario

BenQ

BenQ MP776 - XGA DLP Projector Manual de usuario

BenQ

BenQ LU9715 Manual de usuario

BenQ

BenQ W1700 Manual de usuario

BenQ

BenQ W1200 Manual de usuario

BenQ

BenQ MX805ST Manual de usuario

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Epson

Epson VS400 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Epson

Epson PowerLite Pro Cinema 6020UB Manual de usuario

Epson

Epson PowerLite Home Cinema 705HD Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario

Asus

Asus ZenBeam Latte Manual de usuario