Belkin F9K1106 Manual de usuario
User Manual
F9K1106v1 8820-00923 Rev. A01
Dual-BanD WIRElESS
Range Extender
TABLE OF CONTENTS
Getting Started ........................................... 1
What’s in the Box ............................................1
Initial Setup .................................................2
Getting to Know Your Dual-Band Wireless Range Extender ... 5
Front Panel .................................................5
Back Panel ..................................................6
Technical Details ......................................... 7
Technical Features ...........................................7
System Requirements ........................................7
Advanced Settings ....................................... 8
Resetting the Dual-Band Wireless Range Extender .......... 16
Troubleshooting, Support, and Warranty ................... 18
Troubleshooting ............................................18
Technical Support ...........................................20
Belkin International, Inc., Limited 2-Year Product Warranty ........21
Regulatory Information .................................. 23
FCC Statement .............................................23
1
GETTING STARTED
Congratulations on buying a Dual-Band Wireless Range Extender
(the Range Extender). This device will enable you to extend the range
of your dual-band router to eliminate “dead spots” in your wireless
network. Belkin’s MultiBeam technology gives enhanced coverage
and performance to the areas of your house that need it. Lastly, the
dual-band feature extends both your 2.4GHz and 5GHz networks.
What’s in the Box
Dual-Band Wireless Range Extender
Installation Guide
Power Supply
Networking Cable
User Manual on CD
2
GETTING STARTED
Step 1: Connect the cable to the
Ethernet port on your PC, and
then plug in the power supply.
Step 2: Open a browser, visit
http://Belkin.range, and follow
the onscreen instructions.
Step 3: Once the Range
Extender has successfully
joined the wireless network,
disconnect it from the PC, and
unplug the power supply.
http://Belkin.range|
Initial Setup
To get started, you will need:
• Yourprimarywirelessrouter,
its network name (SSID), and
password. If it’s a dual-band
router, please be sure you have
both SSIDs and passwords.
• Apersonalcomputer
with a web browser
3
GETTING STARTED
Step 5: Plug in the power supply.Step 4: Place the Range Extender in an area where you can still
access your wireless network without problems, but close to the
area where you want to establish your extended network.
4
GETTING STARTED
Step 6: Join your new extended wireless network.
5
Your Range Extender’s status is shown by the light on the front.
Off: The Range Extender is not plugged into a power source.
The Range Extender is starting up.
The Range Extender is connected to the Wi-Fi®network.
The Range Extender is connected to the
Wi-Fi network but is experiencing a weak signal. The weak
signal may be either the 2.4GHz or 5GHz band. A weak
signal may lead to performance problems. Consider moving
the Range Extender closer to the wireless router.
The Range Extender is not connected
to the Wi-Fi network. Check to make sure that your
wireless router is functioning properly, and/or move the
Range Extender closer to the wireless router.
The Range Extender is ready
to be set up. (Refer to “Getting Started” for instructions
on how to set up your Range Extender.)
The WPS button on the front of your Range Extender can be
used to help establish a secure connection between your Range
Extender and other WPS-enabled Wi-Fi devices such as computers.
To use the WPS feature on your Range Extender, see “Getting
Started > Adding Computers to Your Network > Using the WPS
Button.” The small light near the WPS button shows what is
happening while you are using WPS to establish a connection.
Off: Idle
The Range Extender is listening for
a WPS-enabled computer or other device.
The Range Extender has made a secure
connection with the computer or other device.
A connection was not created.
6
Connect AV devices such as a TV, Blu-ray™ player, gaming console,
and other wired devices to these ports using Ethernet cables.
This button is used to restart your Range Extender in rare
cases when it functions incorrectly. Resetting the Range
Extender will preserve your settings. This button may also
be used to restore the factory default settings. Please see
the Troubleshooting section for more information.
Connect the included power supply to this jack.
7
TECHNICAL DETAILS
Specifications
Wireless Standards with Link Rate
• IEEE802.11n(upto300Mbpsfor2.4GHzand5GHz*)
• IEEE802.11g(upto54Mbps*)
• IEEE802.11a(upto54Mbps*)
• IEEE802.11b(upto11Mbps*)
WirelessOperatingSpectrum:
• SimultaneousDual-Band
• 2.4GHzand5GHz
WirelessSecurity:
• Wi-FiProtectedSetup™
• 256-bitWPA®/WPA2®encryption
• 64/128-bitWEPencryption
VPNSupport:
• PPTP
• IPSecpass-through
Ports:
• 4LANFastEthernetports
System Requirements
• 802.11a/b/g/n2.4GHzand/or5GHzwireless
routerwithbroadbandInternetconnection
• Atleastonecomputerwith:
InstalledwirelessnetworkinterfacecardandTCP/IPprotocol
Windows®XP32(SP3orgreater),WindowsVista®32/64,
orWindows732/64;orMacOS®Xv10.5or10.6
InternetExplorer®v7orabove,Firefox®,
GoogleChrome™,orSafari®
Minimum1.8GHzprocessor
Minimum512MBRAM
8
1. Quick-Navigation Links
You can go directly to any of the Range Extender’s
advanced UI pages by clicking directly on these links.
2. Language
Shows the active language for the Advanced User Interface. Select
the desired language by clicking one of the available languages.
3. Page Name
The page you are on can be identified by this name. This User
Manual will sometimes refer to pages by name. For instance,
“LAN > LAN Settings” refers to the “LAN Settings” page.
4. Version Info
The Version Info section gives you information on the
hardware part number, version number, firmware version,
and serial number. Belkin Technical Support may ask you
for this information in certain troubleshooting situations.
5. Features
This section details whether the WPS function is enabled or
disabled, and for which extended network (2.4GHz or 5GHz).
6. and 7.
These sections provide detailed information on
the 2.4GHz and 5GHz extended networks.
The Status Page
ADVANCED SETTINGS
Connecting to the Web Interface
Using your Internet browser, you can access the Range
Extender’s Web-Based Advanced User Interface (UI). In your
browser, type “belkin.range.” Then press the “Enter” key.
1
3
2
4
6
5
7
This page shows the detailed status of your Range Extender.
The meaning of the various items is detailed on the right.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Extensor de Belkin
Belkin
Belkin SURF N300 Manual de usuario
Belkin
Belkin F1D086U Manual de usuario
Belkin
Belkin F1D084 - annexe 1 Manual de usuario
Belkin
Belkin F9K1127 Manual de usuario
Belkin
Belkin OmniView F1DE008C Manual de usuario
Belkin
Belkin RX7500 Manual de usuario
Belkin
Belkin F1D084 - annexe 1 Manual de usuario
Belkin
Belkin F1D084V2 Manual de usuario
Belkin
Belkin WV-HD121-100M Manual de usuario
Belkin
Belkin SURF N300 Manual de usuario
Belkin
Belkin N300DB Manual de usuario
Belkin
Belkin N600 DUAL-BAND Manual de usuario
Belkin
Belkin OmniView F1D084vea2 Manual de usuario
Belkin
Belkin OmniView ENTERPRISE F1DE008B Manual de usuario
Belkin
Belkin OmniView ENTERPRISE Quad-Bus Series Manual de usuario
Belkin
Belkin F9K1015au Manual de usuario
Belkin
Belkin EXPANDVIEW CAT5 Manual de usuario
Belkin
Belkin OmniView Manual de usuario
Belkin
Belkin OmniView F1D086Uea Manual de usuario
Belkin
Belkin PLAY N600 Manual de usuario
