Belkin F4U024 Manual de usuario

SuperSpeed USB 3.0

2-Port ExpressCard™

User Manual

8820-00417 F4U024

Table of Contents SECTIONS 1 2 3 4

TABLE OF CONTENTS

SuperSpeed USB 3.0 2-Port ExpressCard™

Introduction .............................1

Features . . . . . . . . . . . . . . . . . . . . . . 2

USB Specifications . . . . . . . . . . . . . . . . 2

Package Contents . . . . . . . . . . . . . . . . . 2

System Requirements . . . . . . . . . . . . . . . 2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Windows XP . . . . . . . . . . . . . . . . . . . . 3

Windows Vista and Windows 7 . . . . . . . . . . 4

Hardware Installation . . . . . . . . . . . . . . . 5

Verifying Proper Installation (XP) . . . . . . . . . 7

Verifying Proper Installation

(Windows Vista, Windows 7) . . . . . . . . . . . 7

Troubleshooting .........................8

Information.............................10

SuperSpeed USB 3.0 2-Port ExpressCard™

Table of Contents SECTIONS 12 3 4

INTRODUCTION

Welcome to Belkin SuperSpeed Connectivity!

Thank you for purchasing the Belkin SuperSpeed USB 3.0 2-Port ExpressCard.

Now you can upgrade your laptop to the latest USB technology, for better speed and performance. You will be ready to take advantage of

a host of new SuperSpeed USB 3.0 products!

Connecting your USB 3.0 products to your computer with the ExpressCard will allow them to work much faster than ever before. This

includes your hard drives, thumb drives, video cameras, and more. Your current or legacy-generation USB devices will continue to

work as they always have, and in some cases, even better. Just follow the simple installation instructions in this User Manual to get your

ExpressCard set up and working well—then, enjoy the speed and convenience of Belkin USB 3.0 connectivity!

SuperSpeed USB 3.0 2-Port ExpressCard™

Table of Contents SECTIONS 12 3 4

INTRODUCTION

Features

• Single chip NEC µPD720200F1USB 3.0 host controller

• Supports ExpressCard form-factor design

• 2 SuperSpeed USB 3.0 ports

• Simultaneous connection capability for low-, full-, high-, and

SuperSpeed USB devices

• Auto-detection of new devices as they are connected, along

with the speed of each device

• Backward-compatibility with legacy USB devices (1.1, 2.0)

• Plug-and-play technology

USB Specifications

• Intel Extensible Host Controller Interface (xHCI) revision

0.96 compliant

• Current: 900mA per port

• USB 3.0 revision 1.0-compliant

• USB-IF Certified

Package Contents

• One - Belkin SuperSpeed USB 3.0 2-Port ExpressCard

• One - Power Adapter

• One - User Manual

• One - Driver Installation CD

System Requirements

• A Pentium®class PC with one available ExpressCard slot and a

CD-ROM drive

• Windows®XP (SP3), Windows Vista®(SP1), or Windows 7

operating system

SuperSpeed USB 3.0 2-Port ExpressCard™

Table of Contents SECTIONS 1 23 4

INSTALLATION

Installation is composed of three parts: Install Drivers, Install Hardware, and Initialize Drivers with Hardware.

Driver installation is recommended prior to installing the ExpressCard into your laptop computer. Please refer to the section that

corresponds to your operating system.

Windows XP

1. Insert the Driver Installation CD into your CD-ROM drive and the installation wizard should start immediately. If it does not, please open

“My Computer” and right-click on your CD-ROM drive and select “Explore”. Then double-click “Setup” to start the installation wizard.

2. Using the default options, complete the install wizard.

3. Once the installation is complete, click the “Start” button in the lower, left-hand corner of your Windows desktop display. Next, click

“Shutdown” and then select “Shutdown” from the drop-down menu.

4. Follow the hardware installation steps for the ExpressCard in the next section.

SuperSpeed USB 3.0 2-Port ExpressCard™

Table of Contents SECTIONS 1 23 4

INSTALLATION

Windows Vista and Windows 7

1. Insert the Driver Installation CD into your CD-ROM drive and the installation wizard should start immediately. If it does not, click

the Start icon, click “Computer”, right-click on your CD-ROM drive, and select “Explore”. Then double-click “Setup” to start the

installation wizard.

2. Using the default options, complete the install wizard.

3. Once the installation is complete, click the “Start” button in the lower, left-hand corner of your Windows desktop display, and then

select “Shutdown”.

4. Follow the hardware installation steps for the ExpressCard in the next section.

SuperSpeed USB 3.0 2-Port ExpressCard™

Table of Contents SECTIONS 1 23 4

INSTALLATION

Hardware Installation

1. Locate your computer’s ExpressCard slot.

2. Insert the ExpressCard into the slot. Apply pressure as needed until the Card is fully seated.

3. The ExpressCard will be detected and hardware will be installed automatically. Installation is now complete.

Note: Depending on the speed of your computer, it may take up to 30–60 seconds for the ExpressCard to be detected.

The installation procedure is now complete.

SuperSpeed USB 3.0 2-Port ExpressCard™

Table of Contents SECTIONS 1 23 4

INSTALLATION

Verifying Proper Installation (XP)

After installation, you may check the Device Manager to confirm

that the ExpressCard has been properly installed.

1. Right-click on “My Computer”.

2. Select “Properties”.

3. Select the “Hardware” tab and click the “Device

Manager” button.

4. Expand “Universal Serial Bus Controllers”.

5. Look for an entry called “NEC Electronics USB 3.0

Host Controller”.

6. Look for an entry called “NEC Electronics USB 3.0 Root Hub”.

Verifying Proper Installation (Windows Vista,

Windows 7)

After installation, you may check the Device Manager to confirm

that the ExpressCard has been properly installed.

1. Click “Start” and right-click “Computer”.

2. Select “Properties”.

3. Click the “Device Manager” link on the left panel.

4. Expand “Universal Serial Bus Controllers”.

5. Look for an entry called “NEC Electronics USB 3.0

Host Controller”.

6. Look for an entry called “NEC Electronics USB 3.0 Root Hub”.

Note: If your computer features built-in USB ports, you will see

additional USB controller and root-hub entries in the Device

Manager list.

SuperSpeed USB 3.0 2-Port ExpressCard™

Table of Contents SECTIONS 1 2 34

TROUBLESHOOTING

With which operating systems will the ExpressCard work?

Windows XP (SP3), Windows Vista (SP1), and Windows 7

What are the hardware requirements for the ExpressCard?

Pentium class computer with one available ExpressCard slot

My notebook computer does not detect the ExpressCard.

What should I do?

1. Make sure your computer meets all hardware and

software requirements.

2. Make sure the ExpressCard is properly seated into the

ExpressCard slot.

3. Make sure the power adapter is plugged into your ExpressCard.

4. Make sure your operating system has the latest updates and

service packs.

SuperSpeed USB 3.0 2-Port ExpressCard™

Table of Contents SECTIONS 1 2 34

TROUBLESHOOTING

My USB device does not work when connected to the Belkin

USB 3.0 ExpressCard. What should I do?

Confirm the correct installation of the Belkin USB 3.0

ExpressCard. Confirm the correct installation of your USB device.

Note: It may be necessary to reinstall the software/drivers for your

USB device when switching USB ports.

Which ports are SuperSpeed USB 3.0 ports?

All the ports on the ExpressCard are compatible with Hi-Speed

USB 3.0 and legacy USB.

Will my low-, full-, or high-speed (USB 1.1, 2.0) device run at

SuperSpeed (USB 3.0) on this ExpressCard?

No. The ExpressCard will not increase the speed of 2.0 or

1.1 devices.

How far away from my computer can a USB 3.0 peripheral

be located?

The maximum USB 3.0 cable length is three meters (9 feet).

Anything longer will begin to cause problems due to propagation

delays and compromised signal integrity.

Otros manuales para F4U024

Tabla de contenidos

Otros manuales de Hardware de computadora de Belkin

Belkin

Belkin F5U252ea Manual de usuario

Belkin

Belkin F5U222V Manual de usuario

Belkin

Belkin F5D8071 Manual de usuario

Belkin

Belkin Wireless Gplus Notebook Card Manual de usuario

Belkin

Belkin F8T002 Manual de usuario

Belkin

Belkin F5U506ea Manual de usuario

Belkin

Belkin F5U222 Manual de usuario

Belkin

Belkin F5U213 Manual de usuario

Belkin

Belkin F5D8071ak Manual de usuario

Belkin

Belkin F4U024 Manual de usuario

Belkin

Belkin Wireless G F5D7000 Manual de usuario

Belkin

Belkin P73890EA-A Manual de usuario

Belkin

Belkin FireWire ExpressCard F5U505 Manual de usuario

Belkin

Belkin F5D8001 Manual de usuario

Belkin

Belkin F5U505ea Manual de usuario

Belkin

Belkin ExpressCard P75481 Manual de usuario

Belkin

Belkin F5U504ea Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario