Belimo ZTH Series Guía de inicio rápido

Firmware Upgrade

ZTH-…

www.belimo.eu

T9-ZTH Firmware Upgrade • en • 02.2013

1 / 2

Firmware Upgrade of ZTH devices



Simplest use



No special material required



Actual Upgrade version:

ZTH-GEN V4.50

Type Overview

Type Description

ZTH-GEN Service-Tool for Belimo actuators (MF, MP, LON, MOD,...) and VAV controllers

ZTH-VAV Service-Tool for Belimo VAV controllers

General information

•The Firmware Upgrade may be applied only to devices listed in the type overview.

•The instructions concerning setup and workflow must be observed. Belimo assumes no

responsibility for devices, which are no longer usable due to inappropriate handling.

Required Material

Material

Obtaining

Notebook with Windows XP / 7 and free USB interface

Level converter ZIP-USB-MP with automatic MA/MO switching,

incl. USB cable

Belimo Sales

USB device driver for ZIP-USB-MP,

driver is usually pre-installed by the Belimo PC-Tool

Belimo Web

Connecting cable RJ12 to RJ12 (6P/6C),

e. g. Belimo ZK6-GEN (from September 2010)

Belimo Sales

Programming software "ZTH-Updater Vx_xx.exe",

Executable program incl. ZTH firmware

Belimo Web

Optional:

- quick start guide, can be affixed to the rear of the device

- for upgrade of ZTH-VAV: Sticker "ZTH-GEN" for the front of the device

Belimo Sales









ZTH-

Firmware Upgrade

2 / 2

T9-ZTH Firmware Upgrade • en • 02.2013

www.belimo.eu

Workflow

Preparation

Connect level converter ZIP-USB-MP to the computer. If the required device driver is not installed on

the computer, it can be downloaded from the Belimo Web (administrator privileges required).

The ZTH-Updater software can be downloaded from the Belimo Web. No installation is required.

Upgrade

1. Start ZTH-Updater Vx_xx

2. Select COM-Port

3. Click "Update SW…"

4. Keep the Minus button (-) pressed while connecting the ZTH device to the ZIP-USB-MP

5. Wait for completion of update process

▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒



ZTH will restart!

6. Check Welcome screen of the ZTH

BELIMO ZTH-GEN

HW 1.1 SW:4.xx

7. Disconnect ZTH device from ZIP-USB-MP

For the upgrade of further devices continue with step 3.

Post processing

The ZTH device is immediately ready to use. If required, the settings in the configuration menu can

be checked and adjusted.

Optional: Affix the newest quick start guide to the rear of the device.

Optional, for ZTH-VAV adjustment devices: The ZTH-VAV lettering on the front may be paste over

with an orange ZTH-GEN sticker.

Troubleshooting

ZIP-USB-MP not recognized

- Download and install USB device driver from Belimo Web (administrator privileges required)

COM-Port cannot be opened

- ZIP-USB-MP must be connected before starting the ZTH-Updater tool.

- Check COM Port (Windows control panel)

- Close potential conflict software (PC-Tool, synchronisation software, …)

Update process does not start

- Keep the Minus button (-) pressed while connecting the tool to the actuator.

- Check connecting cable, 6-core version required!

Este manual sirve para los siguientes modelos

Otros manuales de Controladores de Belimo

Belimo

Belimo LMB24-MFT Manual de usuario

Belimo

Belimo SY-3-T-TS Series Guía de inicio rápido

Belimo

Belimo AFB Series Manual de usuario

Belimo

Belimo LMB24-3 Series Manual del propietario

Belimo

Belimo TFC120-S US Manual de usuario

Belimo

Belimo GM24G-MF-T Manual de instrucciones

Belimo

Belimo GM24A-MOD Manual de instrucciones

Belimo

Belimo GKX24-MFT-X1 Manual de usuario

Belimo

Belimo FGVL Series Manual de usuario

Belimo

Belimo FSNF230 US Manual de usuario

Belimo

Belimo AR 24-3 Series Manual de usuario

Belimo

Belimo CMB24-3 Manual de usuario

Belimo

Belimo NM24A-MP Manual de instrucciones

Belimo

Belimo LM24A-SX-F Manual de instrucciones

Belimo

Belimo SRF24A-SR Manual de instrucciones

Belimo

Belimo CR24 Series Manual de usuario

Belimo

Belimo EXT-T24-D201 Manual de usuario

Belimo

Belimo AM230-SR Manual de usuario

Belimo

Belimo LF24-3 US Manual de usuario

Belimo

Belimo NF24A Manual de usuario

Belimo

Belimo AMB24-SR-X1 Manual de usuario

Belimo

Belimo PR Manual de usuario

Belimo

Belimo LF120 US Manual de instrucciones

Belimo

Belimo LRB24-MFT Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario