Beko BEHPI 090 Manual de usuario

Owner’s Manual
EN
BEHPI 090/BEHPI 091 BEHPI 120/BEHPI 121
BEHPI 180/BEHPI 181 BEHPI 240/BEHPI 241
02M-8899283200-0321-01
IMPORTANT NOTE:
Inverter
Air Conditioner
Inverter

Please read this user manual first!
Dear Customer,
Thank you for preferring a B eko product. We hope that you get the best results from
your product which has been manufactured with high quality and state-of-the-art
technology. Therefore, please read this entire user manual and all other accompanying
documents carefully before using the product and keep it as a reference for future
use. If you handover the product to someone else, give the user manual as well. Follow
all warnings and information in the user manual.
Meanings of the symbols
Following symbols are used in the various section of this manual:
This product has been produced in environmentally friendly, modern facilities
Complies with the WEEE Regulation. Does not contain PCB.
C
Important information or
useful hints about usage.
A
Warning for hazardous
situations with regard to
life and property.
Risk of fire/flammable
materials
This symbol shows that
this appliance used a
flammable refrigerant. If
the refriaerant is leaked
and exposed to an external
ignition source, there
is a risk of fire. (For the
unit adopts R32/R290
Refrigerant only)
This symbol shows that the
operation manual should be
read carefully.
This symbol shows that a
service personnel should
be handling this equipment
with reference to the
installation manual.
This symbol shows that
information is available
such as the operating
manual or installation
manual.

Split-type room air conditioner / User Manual 3 / 28 EN
1 Safety instructions 4
2 Unit specifications and features 7
2.1 Unit parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.2 Achieving optimal performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.3 Inverter split type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.4 Fixed-speed type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
2.5 Other features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
3 Manual operation (without remote) 14
3.1 How to operate your unit without the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4 Care and maintenance 15
4.1 Cleaning your indoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.2 Cleaning your air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.3 Air filter reminders (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
4.3.1 Air filter cleaning reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
4.3.2 Air filter replacement reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
4.4 Maintenance – long periods of non-use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.5 Maintenance – pre-season inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5 Troubleshooting 20
5.1 Common issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.2 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
6 European disposal guidelines 24
7 Installation instructions 25
7.1 F-Gas instruction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
8 Specification 26
CONTENTS

4 / 28 EN Split-type room air conditioner / User Manual
Read safety precautions before installation
Incorrect installation due to ignoring instructions can
cause serious damage or injury.
The seriousness of potential damage or injuries is classified as
Warning.
Warning
tThis appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
Installation warnings
tAsk an authorized dealer to install this air conditioner. Inappropriate
installation may cause water leakage, electric shock, or fire.
tAll repairs, maintenance and relocation of this unit must be
performed by an authorized service technician. Inappropriate
repairs can lead to serious injury or product failure.
1 Safety instructions
WARNING:
Servicing shall only be performed as recommended by the
equipment manufacturer. Maintenance and repair requiring the
assistance of other skilled personnel shall be carried out under
the supervision of the person competent in the use of flammable
refrigerants. For more details, please refer to the “Information on
servicing" on "INSTALLATION MANUAL " (This is only required for the
unit adopts R32/R290 Refrigerant)

Split-type room air conditioner / User Manual 5 / 28 EN
tDo not use flammable sprays such as hair spray, lacquer or paint
near the unit. This may cause fire or combustion.
tDo not operate the air conditioner in places near or around
combustible gases. Emitted gas may collect around the unit and
cause explosion.
tDo not operate the air conditioner in a wet room (e.g., bathroom or
laundry room). This can cause electrical shock and cause the product
to deteriorate.
tDo not expose your body directly to cool air for a prolonged period
of time.
Electrical warnings
tOnly use the specified power cord. If the power cord is damaged, it
must be replaced by the manufacturer or certified service agent.
tKeep power plug clean. Remove any dust or grime that accumulates
on or around the plug. Dirty plugs can cause fire or electric shock.
tDo not pull power cord to unplug unit. Hold the plug firmly and pull
it from the outlet. Pulling directly on the cord can damage it, which
can lead to fire or electric shock.
1 Safety instructions
Warnings for product use
tIf an abnormal situation arises (like a burning smell), immediately
turn off the unit and pull the power plug. Call your dealer for
instructions to avoid electric shock, fire or injury.
tDo not insert fingers, rods or other objects into the air inlet or
outlet. This may cause injury, since the fan may be rotating at high
speeds.

6 / 28 EN Split-type room air conditioner / User Manual
1 Safety instructions
tDo not clean the air conditioner with excessive amounts of water.
tDo not clean the air conditioner with combustible cleaning agents.
Combustible cleaning agents can cause fire or deformation.
Warning
tIf the air conditioner is used together with burners or other heating
devices, thoroughly ventilate the room to avoid oxygen deficiency.
tTurn off the air conditioner and unplug the unit if you are not going
to use it for a long time.
tTurn off and unplug the unit during storms.
tMake sure that water condensation can drain unhindered from the
unit.
tDo not operate the air conditioner with wet hands. This may cause
electric shock.
tDo not use device for any other purpose than its intended use.
tDo not climb onto or place objects on top of the outdoor unit.
tDo not allow the air conditioner to operate for long periods of time
with doors or windows open, or if the humidity is very high.
tDo not use an extension cord, manually extend the power cord, or
connect other appliances to the same outlet as the air conditioner.
Poor electrical connections, poor insulation, and insufficient voltage
can cause fire.
Cleaning and maintenance warnings
tTurn off the device and pull the plug before cleaning. Failure to do
so can cause electrical shock.

Split-type room air conditioner / User Manual 7 / 28 EN
2.1 Unit parts
1
2
3
4
5
6
7
1. Front Panel
2. Display window
3. Power Cable (Some Units)
4. Remote control Holder (Some Units)
5. Remote Control
6. Functional Filter (On Front of Main Filter - Some Units)
7. Louver
Display code meanings
“ ” for 3 seconds when:
tTIMER ON is set
tFRESH, SWING, TURBO, SILENCE or SOLAR PV ECO features are turned on
“” for 3 seconds when:
tTIMER OFF is sett
tFRESH, SWING, TURBO, SILENCE or SOLAR PV ECO features are turned off
“” when anti-cold air feature is turned on
“” when defrosting
“” when unit is self-cleaning
“” when freeze protection is turned on
2 Unit specifications and features

8 / 28 EN Split-type room air conditioner / User Manual
2 Unit specifications and features
" " when wireless Control feature is activated (some units)
"" When ECO function(optional) is activated, the ' ' illuminates gradually one by one as -- --
--set temperature-- ...... in one second interval.
In Fan mode, the unit will display the room temperature.
In other modes, the unit will display your temperature setting.
C
Note:
A guide on using the infrared remote is not included in this literature package.
2.2 Achieving optimal performance
Optimal performance for the COOL, HEAT, and DRY modes can be achieved in the following
temperature ranges. When your air conditioner is used outside of these ranges, certain safety
protection features will activate and cause the unit to perform less than optimally.
2.3 Inverter split type
COOL mode HEAT mode DRY mode
Room temperature 17°C - 32°C
(63°F - 90°F)
0°C - 30°C
(32°F - 86°F)
10°C - 32°C
(50°F - 90°F)
Outdoor temperature
0°C - 50°C
(32°F - 122°F)
-15°C - 30°C
(5°F - 86°F)
0°C - 50°C
(32°F - 122°F)
-15°C - 50°C
(5°F - 122°F)
(For models with
low temp. cooling
systems.)
0°C - 60°C
(32°F - 140°F)
(For special tropical
models)
0°C - 60°C
(32°F - 140°F)
(For special tropical
models)
For outdoor units with auxiliary electric heater
When outside temperature is below 0°C (32°F ), we strongly recommend keeping the unit plugged in
at all time to ensure smooth ongoing performance.

Split-type room air conditioner / User Manual 9 / 28 EN
2.4 Fixed-speed type
COOL mode HEAT mode DRY mode
Room
temperature 17° - 32°C (63° - 90°F) 0° - 30°C
(32° - 86°F)
10° - 32°C (50° - 90°F)
Outdoor
temperature
18° - 43°C (64° - 109°F)
-7° - 24°C
(19° - 75°F)
11° - 43°C (52° - 109°F)
-7° - 43°C (19° - 109°F)
(For models with low-temp
cooling systems)
18° - 43°C (64° - 109°F)
18° - 54°C (64° - 129°F)
(For special tropical models)
18° - 54°C (64° - 129°F)
(For special tropical models)
To further optimize the performance of your unit, do the following:
tKeep doors and windows closed.
tLimit energy usage by using TIMER ON and TIMER OFF functions.
tDo not block air inlets or outlets.
tRegularly inspect and clean air filters.
For a detailed explanation of each function, refer to the Remote Control Manual.
2.5 Other features
tAuto-restart
If the unit loses power, it will automatically restart with the prior settings once power has been
restored.
tAnti-mildew (some units)
When turning off the unit from COOL, AUTO (COOL), or DRY modes, the air conditioner will continue
operate at very low power to dry up condensed water and prevent mildew growth.
tWireless control (some units)
Wireless control allows you to control your air conditioner using your mobile phone and a Wireless
connection.
tLouver angle memory (some units)
When turning on your unit, the louver will automatically resume its former angle.
tRefrigerant leakage detection (some units)
The indoor unit will automatically display “EC” when it detects refrigerant leakage.
For a detailed explanation of your unit’s advanced functionality (such as TURBO mode and its self-
cleaning functions), refer to the Remote Control Manual.
2 Unit specifications and features

10 / 28 EN Split-type room air conditioner / User Manual
C
Note:
Illustrations in this manual are for explanatory purposes. The actual shape of your
indoor unit may be slightly different. The actual shape shall prevail.
tSetting angle of air flow
Setting vertical angle of air flow
While the unit is on, use the SWING/DIRECT button to set the direction (vertical angle) of airflow.
1. Press the SWING/DIRECT button once to activate the louver. Each time you press the button, it
will adjust the louver by 6°. Press the button until the direction you prefer is reached.
2. To make the louver swing up and down continuously, press and hold the SWING/DIRECT button
for 3 seconds. Press it again to stop the automatic function.
Setting horizontal angle of air flow
The horizontal angle of the airflow must be set manually. Grip the deflector rod (See Fig.B) and
manually adjust it to your preferred direction.
For some units, the horizontal angle of the airflow can be set by remote control. please refer to the
Remote Control Manual.
C
Note on louver angles:
When using COOL or DRY mode, do not set louver at too vertical an angle for long
periods of time. This can cause water to condense on the louver blade, which will drop
on your floor or furnishings. (See Fig.A)
When using COOL or HEAT mode, setting the louver at too vertical an angle can reduce
the performance of the unit due to restricted air flow.
Do not move louver by hand. This will cause the louver to become out of sync. If this
occurs, turn off the unit and unplug it for a few seconds, then restart the unit. This will
reset the louver.
2 Unit specifications and features
Otros manuales para BEHPI 090
2
Este manual sirve para los siguientes modelos
7
Tabla de contenidos
Idiomas:

















