1-701-475-2361 1-888-475-2361
www.bekspyder.com
6. Select “Set Scheduled Times” at the bottom of the screen.
7. You will now see a list of actions that are sorted by device type. You can select the switch you
want to use under the Switches or Dimmers group (names will vary based on the naming scheme
your system uses).
8. Select “Using the [Switch Name]”.
9. In the next screen select Using the [Switch Name] turn it on”.
10. In the next screen select “Save this action”.
11. We now have a rule set that will turn on a switch at 5:00 p.m., but we still have to create another
rule that will turn off the switch at 7:00 p.m..
12. Repeat steps 1 – 5, but instead of setting the time
at 5:00 p.m., set it at 11:00 p.m. for step 4, set it to
turn it off in step 9. In the end, you should have 2
rules created; one that turns on the switch,
and one that turns off the switch (gure right).
RECEIVING TEXTS WHEN MOTION SENSOR DETECTS MOTION
With the BEK SpyderProtect system, you can easily set up rules that will send your phone a text when an
event has occurred. In this example, we will create a rule to send a text message if motion is detected.
1. At the Main Menu, select “Rules”.
2. In the rules app, select “Home/Business
Automation Rules.”
3. Click “Add a new Automation Rule”.
4. You will see a list of devices that can be used to
create a condition.
5. Select “When the motion sensor [Sensor Name]”.
(names will vary depending on naming scheme).
6. In the next screen select “When [motion detector’s
name] identies motion…”.
7. On the next screen select, “When the [motion
sensors name] identies motion is detected.”.
8. Save the condition.
9. To create an action that sends a text message, on the next screen select,
“Send a text message to…”.
10. Enter the mobile phone number that you want to
receive the text message.
11. Save the action.
