Beijer Electronics IX T15C - C23 Manual de usuario

iXT15C

InstallationManual

English

MAEN083D,2013-09

Foreword

InstallationmanualforiXT15C

Foreword

All operator panels are developed to satisfy the demands of human-machine

communication. Built-in functions such as displaying and controlling text,

dynamic indication, time channels, alarm and recipe handling are included.

The operator panel works primarily in an object-oriented way, making it easy to

understand and use. Conﬁguration is carried out on a PC using the iX Developer

conﬁguration tool. The project can then be transferred and stored in the operator

panel itself.

Various types of automation equipment such PLCs, servos or drives can be

connected to the operator panels. In this manual, the term “the controller” refers

to the connected equipment.

This manual explains how to install the operator panel. Please refer to the

iX Developer reference manual for further information.

Order no: MAEN083D

The information in this document is subject to changewithoutnoticeandisprovidedasavailableatthe

time of printing. Beijer Electronics AB, including all its group companies, reserves the right to change any

information without updating this publication. Beijer Electronics AB, including all its group companies,

assumesnoresponsibilityforanyerrorsthatmayappearinthisdocument. Readtheentireinstallation

manual prior to installing and using this equipment. Only qualiﬁed personnel may install, operate or repair

this equipment. Beijer Electronics AB, including all its group companies, are not responsible for modiﬁed,

altered or renovated equipment. Because the equipment has a wide range of applications, users must acquire

the appropriate knowledge to use the equipment properly in their speciﬁc applications. Persons responsible

for the application and the equipment must themselves ensure that each application is in compliance with

all relevant requirements, standards and legislationinrespecttoconﬁgurationandsafety. Onlypartsand

accessories manufactured according to speciﬁcations set by Beijer Electronics AB,including all its group

companies, may be used.

BEIJER ELECTRONICS AB, INCLUDING ALL ITS GROUP

COMPANIES, SHALL NOT BE LIABLE TO ANYONE FOR ANY

DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE INSTALLATION, USE OR

REPAIR OF THIS EQUIPMENT, WHETHER ARISING IN TORT,

CONTRACT, OR OTHERWISE. BUYER'S SOLE REMEDY SHALL

BE THE REPAIR, REPLACEMENT, OR REFUND OF PURCHASE

PRICE, AND THE CHOICE OF THE APPLICABLE REMEDY SHALL

BE AT THE SOLE DISCRETION OF BEIJER ELECTRONICS AB,

INCLUDING ALL ITS GROUP COMPANIES.

BeijerElectronics, MAEN083D

Contents

1 SafetyPrecautions ....................................................... 4

1.1 General ........................................................... 4

1.2 DuringInstallation .............................................. 4

1.3 DuringUse ....................................................... 5

1.4 Service and Maintenance ........................................ 5

1.5 Dismantling and Scrapping ..................................... 5

1.6 Appearance of Air in Touch Screen ............................. 5

2 Installation ............................................................... 6

2.1 SpaceRequirements ............................................. 6

2.2 InstallationProcess .............................................. 7

2.2.1 ConnectionstotheController .................................. 9

2.2.2 OtherConnectionsandPeripherals ............................. 9

3 HardwareReplacement ................................................. 10

3.1 Replacing the Fan and Filter ..................................... 10

3.2 Replacing the 2.5” SATA MassStorage ......................... 12

3.3 ReplacingaCompactFlashorCFastMemoryCard ........... 14

3.4 ReplacingtheBattery ............................................ 15

4 TechnicalData ........................................................... 16

5 ChemicalResistance .................................................... 18

5.1 MetalCasing ..................................................... 18

5.2 Touch Screen and Overlay ....................................... 19

5.2.1 AutotexF157/207 ...............................................19

5.2.2 TouchScreenSurface ............................................20

5.2.3 Autotex ..........................................................20

6 OperatorPanelDrawings .............................................. 21

6.1 Connectors ....................................................... 21

6.2 CommunicationPorts ........................................... 21

6.3 iXT15COutline ................................................. 23

7 Additional Installation Tips ............................................ 25

7.1 Grounding the Operator Panel ................................. 25

7.2 EthernetConnectionintheOperatorPanel ................... 26

7.3 To Achieve Better EMC Protection ............................. 28

7.4 AmbientTemperature ........................................... 29

7.5 Safety ............................................................. 30

7.6 Cable and Bus Termination RS485 ............................. 31

7.7 BootPriority ..................................................... 32

7.8 EnteringBIOS ................................................... 32

7.9 ResetSwitch ...................................................... 33

BeijerElectronics, MAEN083D

Safety Precautions

1SafetyPrecautions

Both the installer and the owner and/or operator of the operator panel must read

and understand this installation manual.

1.1 General

•Read the safety precautions carefully.

•Check the delivery for transportation damage. If damage is found, notify the

supplier as soon as possible.

•Do not use the operator panel in an environment with high explosive hazards.

•The supplier is not responsible for modiﬁed, altered or reconstructed

equipment.

•Use only parts and accessories manufactured according to speciﬁcations of

the supplier.

•Read the installation and operating instructions carefully before installing,

using or repairing the operator panel.

•Neverallowﬂuids,metalﬁlingsorwiringdebristoenteranyopeningsinthe

operator panel. This may cause ﬁre or electrical shock.

•Only qualiﬁed personnel may operate the operator panel.

•Storing the operator panel where the temperature is lower/higher than

recommended in this manual can cause the LCD display liquid to

congeal/become isotopic.

•The LCD display liquid contains a powerful irritant. In case of skin contact,

wash immediately with plenty of water. In case of eye contact, hold the eye

open,ﬂushwithplentyofwaterandgetmedicalattention.

•Theﬁguresinthismanualservesanillustrativepurpose. Becauseofthemany

variables associated with any particular installation, the supplier cannot

assume responsibility for actual use based on the ﬁgures.

•The supplier neither guarantees that the operator panel is suitable for your

particular application, nor assumes responsibility for your product design,

installation or operation.

•It is recommended to turn on and shut down the operator panel at least once

before installing any components/cards or before connecting the operator

panel to external devices, like for example serial devices.

1.2 DuringInstallation

•The operator panel is designed for stationary installation on a plane surface,

where the following conditions are fulﬁlled:

–no high explosive risks

–no strong magnetic ﬁelds

–no direct sunlight

–no large, sudden temperature changes

•Install the product according to the accompanying installation instructions.

•Ground the product according to the accompanying installation instructions.

•Only qualiﬁed personnel may install the operator panel.

•Separate the high voltage, signal and supply cables.

•Make sure that the voltage and polarity of the power source is correct before

connecting the product to the power outlet.

BeijerElectronics, MAEN083D 4

Safety Precautions

•Peripheral equipment must be appropriate for the application and location.

1.3 DuringUse

•Keep the operator panel clean.

•Emergency stop and other safety functions may not be controlled from the

operator panel.

•Do not use too much force or sharp objects when touching the keys,

touchscreen etc.

1.4 ServiceandMaintenance

•Only qualiﬁed personnel should carry out repairs.

•The agreed warranty applies.

•Before carrying out any cleaning or maintenance operations, disconnect the

equipment from the electrical supply.

•Clean the display and surrounding front cover with a soft cloth and mild

detergent.

•Replacing the battery incorrectly may result in explosion. Only use batteries

recommended by the supplier. During the warranty period, the battery needs

to be replaced by an authorized Beijer Electronics service center.

•The unit can be reset by using the reset switch located behind the fan.

1.5 DismantlingandScrapping

•The operator panel or parts thereof shall be recycled according to local

regulations.

•The following components contain substances that might be hazardous

to health and the environment: lithium battery, electrolytic capacitor and

display.

1.6 AppearanceofAirinTouchScreen

•Thelayerstructureofthetouchscreencontainsairandinrarecases

appearance of bubbles can arise. This is purely cosmetic and does not affect

any functionality of the panel. The appearance can occur under certain

environmental conditions such as temperature, humidity, and atmospheric

pressure.

BeijerElectronics, MAEN083D 5

Installation

2Installation

2.1 SpaceRequirements

•Maximum installation plate thickness: 8 mm

•Space requirements in millimeters when installing the operator panel:

410 mm

286 mm

100 mm

50 mm 50 mm 100 mm

100 mm

Note:

Thedimensionsonthedrawingarenotproportional.

Caution:

Theopeningsontheenclosureareforairconvection. Donotcovertheseopenings.

BeijerElectronics, MAEN083D 6

Installation

2.2 InstallationProcess

The following is needed:

•ATorxTX7screwdriver

1. Unpack and check the delivery. If damage is found, notify the supplier.

Note:

Placetheoperatorpanelonastablesurfaceduringinstallation.

Droppingthepanelorlettingitfallmaycausedamage.

2. Usethecutoutdimensionsthatareincludedontheoutlinedrawing,found

in section Operator Panel Drawings and in the Technical Data table, to cut

a correct opening in the cabinet. A separate cut out drawing is available for

download from the Beijer Electronics web site.

3. Secure the operator panel in position by screwing the M4 Torx screw, allowing

the built-in bracket to tighten against the panel:

M4 x 20.7

0.4 Nm

BeijerElectronics, MAEN083D 7

Installation

4. Connect the cables in the speciﬁed order, according to the drawing and steps

below.

Caution:

•Ensurethattheoperatorpanelandthecontrollersystemhavethesameelectrical

grounding(referencevoltagelevel),otherwiseerrorsincommunicationmay

occur.

•Theoperatorpanelmustbebroughttoambienttemperaturebeforeitisstarted

up. Ifcondensationforms,ensurethattheoperatorpanelisdrybeforeconnecting

ittothepoweroutlet.

•Ensurethatthevoltageandpolarityofthepowersourceiscorrect.

•Useonlyshieldedcommunicationcables.

•Separatehighvoltagecablesfromsignalandsupplycables.

24V DC

RS232/

RS422/

RS485 24V DC

Controller

Power

Ethernet

–Connect cable A.

–Connect cable B, using an M5 screw and a grounding conductor (as short

as possible) with a cross-section of minimum 2.5 mm2.

–Connect cable C.

–Connect cable D. The recommended cross-section of the cable is

2.5 mm2.

5. Carefully remove the laminated ﬁlm over the operator panel display, to avoid

static electricity that could damage the panel.

BeijerElectronics, MAEN083D 8

Installation

2.2.1 ConnectionstotheController

For information about the cables to be used when connecting the operator panel to

the controller, please refer to the help ﬁle for the driver in question.

2.2.2 OtherConnectionsandPeripherals

Cables, peripheral equipment and accessories must be suitable for the application

and its environment. For further details or recommendations, please refer to the

supplier.

BeijerElectronics, MAEN083D 9

Hardware Replacement

3 HardwareReplacement

This section contains instructions on how to replace operator panel hardware.

Only components included in the latest bill of material and spare parts list are

allowed.

3.1 ReplacingtheFanandFilter

The following is needed:

•Anewfan

•A Torx TX10 and a TX20 screwdriver

Note:

MakesuretouseadequateESDprotection.

Follow the steps below to replace the fan and fan ﬁlter:

1. Power off the operator panel.

2. Remove the fan lid by removing the two M3x6 Torx screws.

3. Remove the fan ﬁlter.

BeijerElectronics, MAEN083D 10

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Panel táctil de Beijer Electronics

Beijer Electronics

Beijer Electronics X2 control 4-B2 Manual de usuario

Beijer Electronics

Beijer Electronics T15BR Manual de usuario

Beijer Electronics

Beijer Electronics X2 pro 15-B2 Manual de usuario

Beijer Electronics

Beijer Electronics X2 pro 12-B2 Manual de usuario

Beijer Electronics

Beijer Electronics X2 control 10-B2 Manual de usuario

Beijer Electronics

Beijer Electronics X2 pro Manual de usuario

Beijer Electronics

Beijer Electronics X2 extreme 15 HP Manual de usuario

Beijer Electronics

Beijer Electronics EXTER T150 Manual de usuario

Beijer Electronics

Beijer Electronics X2 extreme 15 SL HP Manual de usuario

Beijer Electronics

Beijer Electronics X2 pro 4-B2 Manual de usuario

Beijer Electronics

Beijer Electronics X2 pro 7-B2 2eth Manual de usuario

Beijer Electronics

Beijer Electronics X2 marine 15 - B2 Manual de usuario

Beijer Electronics

Beijer Electronics iX T15BR-HP-HB Manual de usuario

Beijer Electronics

Beijer Electronics X2 base 10 v2 HP Manual de usuario

Beijer Electronics

Beijer Electronics T15BM Manual de usuario

Beijer Electronics

Beijer Electronics X2 pro 7-B2 Manual de usuario

Beijer Electronics

Beijer Electronics X2 pro 15 web Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

Beijer Electronics

Beijer Electronics EPC T170/170 C2D Nautic Manual de usuario

Beijer Electronics

Beijer Electronics X2 marine 7-B2 Manual de usuario

Beijer Electronics

Beijer Electronics X2 pro 21-B2 Manual de usuario

Beijer Electronics

Beijer Electronics X2 control 15-B2 Manual de usuario

Beijer Electronics

Beijer Electronics X2 base 10 Manual de usuario

Beijer Electronics

Beijer Electronics X2 extreme 15 Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario

B&R Industries

B&R Industries MAPPC900-ENG Manual de usuario

Beijer Electronics iX T15C - C23 Manual de usuario

Manuales populares de Panel táctil de otras marcas