Behringer Minimamp Gma 100 Manual de usuario

User Guide

Version 1.1 May 2006

MINIAMP GMA100

MINIMAMP GMA100

IMPORTANT SAFETY INSTRUCTIONS:

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the third prong are provided for

your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, conveni-

ence receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the ap-

paratus has been damaged in any way, such as power supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

DEUTSCH

MINIAMP GMA100

1. INTRODUCTION

The MINIAMP GMA100 is a compact but powerful guitar amplifier. With this unit, you can

adjust not only the volume of your electric guitar, but also the tone and level of distortion. And

you can play privately—the GMA100 includes a headphone connector. For your convenience,

the GMA100 can run on mains power (via a DC 9 V power adapter) or a 9 V battery.

1.1 Before you start

1.1.1 Shipment

Your GMA100 was carefully packed at the factory. Nevertheless, we recommend that you

carefully examine the packaging and its contents for any signs of physical damage that may

have occurred during transit.

If the unit is damaged, please do NOT return it to BEHRINGER. Instead,

notify your dealer and the shipping company immediately. Otherwise,

claims for damage or replacement may not be honored.

Always use the original packing carton to prevent damage during storage

or transport.

Make sure that no children are left unsupervised with the GMA100 or its

packaging.

Please ensure proper disposal of all packing materials.

1.1.2 Initial operation

Do not put the GMA100 on any equipment that generates intense heat, for example an

amplifier. Ensure that the ventilation openings are not covered or blocked. Use only a safety-

tested, certified 9 V adapter or a 9 V battery to power the device.

1.INTRODUCTION

MINIMAMP GMA100

2.CONTROLELEMENTSANDCONNECTIONS

1.1.3 Online registration

Please do remember to register your new BEHRINGER equipment right after your purchase

by visiting www.behringer.com (alternatively www.behringer.de) and kindly read the terms

and conditions of our warranty carefully.

Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as

possible.Toarrangeforwarrantyservice,pleasecontacttheretailerfromwhomtheequipment

was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may

directly contact one of our subsidiaries. Corresponding contact information is included in the

original equipment packaging (Global Contact Information/European Contact Information).

Should your country not be listed, please contact the distributor nearest you. A list of

distributors can be found in the support area of our website (www.behringer.com/support).

Registering your purchase and equipment with us helps us process your repair claims

quicker and more efficiently. Thank you for your cooperation!

2. CONTROL ELEMENTS AND CONNECTIONS

This chapter describes how to use the GMA100 and provides details about registering the

GMA100. The following table describes what each section of this chapter covers:

This section Introduces what you need to...

2.1 Control Elements modify a guitar signal and monitor the status of the GMA100 (on or off)

2.2 Connectors connect the GMA100 to a guitar, headphones, and mains power

2.3 Battery Compartment and Accessories run the GMA100 on a battery and use the setup accessories

2.4 Serial Number register the GMA100

2.1 Control elements

This section illustrates and provides descriptions of the GMA100 control elements that you

need to:

DEUTSCH

MINIAMP GMA100

2.CONTROLELEMENTSANDCONNECTIONS

Vmodify a guitar signal

Vmonitor the status of the GMA100 (on or off)

Fig. 2.1: The top of the GMA100

Before you connect a guitar to the GMA100 ( ), turn the VOLUME ( )

control to the minimum setting.

GAIN control:

To adjust the amount of signal distortion, turn this knob toward min (zero, no distortion)

or, alternatively max (maximum distortion).

VOLUME control:

To adjust the volume level of the GMA100, turn this control toward min (no volume) or,

alternatively max (maximum volume).

POWER LED:

As long as you supply power to the GMA100, this LED is illuminated. For details about:

Vmains power, see 2.2 Connectors

Vbattery power, see 2.3 Battery Compartment and Accessories

TONE control: To adjust the signal tone, turn this control toward min (bass) or,

alternatively, max (treble).

MINIMAMP GMA100

2.CONTROLELEMENTSANDCONNECTIONS

2.2Connectors

This section illustrates and provides descriptions of what you need to connect the GMA100 to:

Van electric guitar

Vheadphones

Vmains power

Fig 2.2: The side of the GMA100

PHONES connector:

To connect headphones to the GMA100 and mute the loudspeaker, use this 1/8" stereo

connector.

High volume levels can overload headphones speakers, which create

distortion. If this happens, reduce the VOLUME setting ( ).

INPUT connector:

To connect an electric guitar to the GMA100, use this 1/4" TS connector (mono).

As long as a guitar is connected to the GMA100, the GMA100 consumes

energy. When you do not use the GMA100 for prolonged periods of time,

unplug your guitar from the INPUT connector.

DEUTSCH

MINIAMP GMA100

2.CONTROLELEMENTSANDCONNECTORS

DC 9 V connector:

To supply mains power to the GMA100, plug a DC 9 V power adapter in this connector.

You can also power the GMA100 via a 9 V battery. For details, see 2.3 Battery

Compartment and Accessories.

2.3 Battery compartment and accessories

This section illustrates and provides descriptions of the setup accessories and battery

compartment.

Fig. 2.3: The rear of the GMA100

Belt Clip: To hang the GMA100 from your belt or a wall fixture, use this hook.

Stand: When you set the GMA100 on a table or floor, pull out this stand. This stand

stabilizes the GMA100 and directs the amplified sound upward.

Battery compartment:

To supply battery power to the GMA100, do the following:

1. Remove the cover from the battery compartment.

Inside the battery compartment, you find the 9 V battery connector.

2. Connect a 9 V battery to the 9 V connector.

3. Replace the cover on the battery compartment.

MINIMAMP GMA100

3.BASIC SETTINGS

2.4 Serial number

The serial number that uniquely identifies your GMA100 is located on the bottom of the unit.

You need this number to register your GMA100. In most countries, register online at

www.behringer.com. In Japan, fill out the warranty card that comes with your unit.

3. BASIC SETTINGS

The sounds that you create with the GMA100 depend on your playing style and guitar. To

find the sounds you want, experiment with the GMA100. To help you get started, the

following table identifies some basic GMA100 settings:

DEUTSCH

MINIAMP GMA100

4.SPECIFICATIONS

4. SPECIFICATIONS

INPUT

Type 1/4" TS connector (mono)

Impedance approx. 500 kΩ

PHONES

Type 1/8" stereo connector

Impedance min. 32 Ω

Max. output level 85mW

LOUDSPEAKER

Size 3" (approx. 76 mm)

Impedance 4 Ω

Power rating 5 W

POWER

Power amp output 2 W @ 4 Ωload

Power supply - External power supply: 9 V / min. 250 mA

- Battery: 9 V [type: 61 LR 61 (IEC) or 1604D (ANSI)]

Mains voltages

USA/Canada 120 V~, 60 Hz

China/Korea 220 V~, 50 Hz

U.K./Australia 240 V~, 50 Hz

Europe 230 V~, 50 Hz

Japan 100 V~, 50 - 60 Hz

Power consumption approx. 250 mA

DIMENSIONS/WEIGHT

Dimensions (H x W x D) approx. 6" x 5" x 2 1/2"

(approx. 155 mm x 130 mm x 65 mm)

Weight approx. 1 lb. (approx. 0.5 kg)

BEHRINGERisconstantlystrivingto manintainthehighest professionalstandards.Asaresultoftheseefforts, modificationsmaybe

madefrom timeto timeto existingproducts withoutprior notice.Specifications andappearancemaydifferfromthoselistedorillustrated.

MINIMAMP GMA100

5. WARRANTY

§1 OTHER WARRANTYRIGHTSAND NATIONAL LAW

1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular,

any such rights against the seller that arise from a legally effective purchase contract.

2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of

national warranty law.

§ 2 ONLINE REGISTRATION

Please do remember to register your new BEHRINGER equipment right after your purchase by visiting

www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions of our

warranty carefully.

Registering your purchase and equipment with us helps us process your repair claims quicker and more

efficiently.

Thank you for your cooperation!

§3WARRANTY

1. BEHRINGER (BEHRINGER International GmbH including all BEHRINGER subsidiaries listed on the

enclosed page, except BEHRINGER Japan) warrants the mechanical and electronic components of this

product to be free of defects in material and workmanship for a period of one (1) year* from the original

date of purchase, in accordance with the warranty regulations described below. If the product shows any

defects within the specified warranty period that are not excluded from this warranty as described under

§ 5, BEHRINGER shall, at its discretion, either replace or repair the product using suitable new or

reconditioned parts. In the case that other parts are used which constitute an improvement, BEHRINGER

may, at its discretion, charge the customer for the additional cost of these parts.

2. If the warranty claim proves to be justified, the product will be returned to the user freight prepaid.

3. Warranty claims other than those indicated above are expressly excluded.

§ 4 RETURN AUTHORIZATION NUMBER

1. To obtain warranty service, the buyer (or his authorized dealer) must call BEHRINGER (see enclosed

list) during normal business hours BEFORE returning the product. All inquiries must be accompanied by a

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Amplificador de instrumentos musicales de Behringer

Behringer

Behringer ultrabass BX1200 SPEAKERS Manual de usuario

Behringer

Behringer Bass V-Amp Manual de usuario

Behringer

Behringer ULTRA-DI DI100 Manual de usuario

Behringer

Behringer ULTRABASS BXL1800A Manual de usuario

Behringer

Behringer V-AMPIRE Manual de usuario

Behringer

Behringer ultrabass BX1200 SPEAKERS Manual de usuario

Behringer

Behringer V-Tone GM110 Manual de usuario

Behringer

Behringer V-tone GM108 Manual de usuario

Behringer

Behringer Ultrabass BX300 Manual de usuario

Behringer

Behringer Ultracoustic ACX1000 Manual de usuario

Behringer

Behringer V-AMPIRE LX1200H/LX210 Manual de usuario

Behringer

Behringer Ultratwin GX212 Manual de usuario

Behringer

Behringer HA-40R Manual de usuario

Behringer

Behringer V-AMPIRE LX1200H Manual de usuario

Behringer

Behringer ULTRABASS BX1800 Manual de usuario

Behringer

Behringer V-TONE GM212 Manual de usuario

Behringer

Behringer Ultratwin GX212 Manual de usuario

Behringer

Behringer V-AMPIRE LX1200H Manual de usuario

Behringer

Behringer UltraBass BX4500H Manual de usuario

Behringer

Behringer ULTRATONE KT108 Manual de usuario

Behringer

Behringer Ultrastack BG412S Manual de usuario

Behringer

Behringer V-tone GM108 Manual de usuario

Behringer

Behringer Ultrastack BG412V Manual de usuario

Behringer

Behringer Vintager FC112 Manual

Manuales populares de Amplificador de instrumentos musicales de otras marcas

Peavey

Peavey Wiggy Manual de usuario

acus

acus One Forstreet 10 Manual de usuario

Marshall Amplification

Marshall Amplification MG10KK Manual de usuario

Pyle Pro

Pyle Pro PPG860A Manual de usuario

Laney

Laney BC30 Manual de usuario

Vox

Vox Pathfinder 15SMR Manual de usuario

Marshall Amplification

Marshall Amplification JVM205C Manual de usuario

Crate

Crate Professional BV-120H Manual de usuario

Peavey

Peavey Basic 60 Manual de usuario

Fender

Fender Bassman 1200 Manual de usuario

ZT Club Manual de usuario

Ibanez

Ibanez IFS2X Manual de usuario

Crate

Crate GLX1200H Manual de usuario

Laboga

Laboga THE BEAST Manual de usuario

Falken1

Falken1 Traveller Pro Manual de usuario

Hughes & Kettner

Hughes & Kettner Bass Kick 303 Manual de usuario

Yamaha

Yamaha GA-10 Manual de usuario

Engl

Engl Powerball-2 Manual de servicio