Behringer POWERPLAY P16-M Manual de usuario

BASS

Controls the bass EQ level for mono

channel, stereo-linked pair, or MAIN stereo

signal.

MID

Controls the mid-range EQ for the currently

selected mono channel, stereo-linked pair,

or MAIN stereo signal.

FREQ

Selects the specic mid-range frequency

band to be cut or boosted using the MID

control.

TREBLE

Controls the treble EQ level for mono

channel, stereo-linked pair, or MAIN stereo

signal.

LINK

Button combines adjacent mono

channels into linked stereo pairs

GROUP

Groups any selected mono or

stereo-linked channels in to one or

more groups, which can be stored into

user presets.

RECALL

Loads one of the 16 user presets

available.

STORE

Saves current settings to one of the 16

user presets available.

OUTPUT LIMITER – controls the

limiter threshold for the master

output.

OUTPUT LEVEL – controls the

overall master output level

POWERPLAY P16-M CONTROLS

MAIN

Selects the main stereo bus signal, which has its

own settings for volume, balance and equaliza-

tion.

SOLO

Mutes all channels except for the selected mono

channel, stereo-linked pair, or group.

MUTE

Mutes the selected channel(s) or the MAIN signal

(full mute).

PAN/BAL

Adjusts the stereo placement of mono channels and

the relative left-right balance of stereo-linked

channels or the MAIN stereo bus signal.

VOLUME

Adjusts the mix level for selected mono or

stereo-linked channel, group or the MAIN stereo bus

signal

CHANNEL SELECT

Buttons activate mono and stereo-linked channels

and groups for individual mix adjustment and

editing.

POWERPLAY 16 (P16-M) – BASIC MIX SETUP

1. Turn the OUTPUT LEVEL knob all the way down to the full counter-clockwise position.

2. Turn the OUTPUT LIMITER knob all the way up to the full clockwise position.

3. Confirm that the ULTRANET LED is lit.

4. Activate your audio channels by pressing each CHANNEL SELECT button until the LED lights up

red.*

5. While playing audio, slowly turn the OUTPUT LEVEL knob clockwise until you have a comfortable

basic monitoring level.

6. Slowly turn the OUTPUT LIMITER knob counter-clockwise to get the limiter working and find an

acceptable balance between dynamics and control of volume peaks.

7. Create stereo channels by pressing the LINK button and then any CHANNEL SELECT button. The

related adjacent channel will get stereo-linked. Press the LINK button again to release the LINK

menu.

8. To adjust any individual or stereo channel in the mix, press the channel’s CHANNEL SELECT

button until the button lights red.

9. Turn the PAN/BAL knob clockwise or counter-clockwise to adjust the channel’s position in the

stereo field.

10. Turn the VOLUME knob clockwise or counter-clockwise to adjust the channel’s relative level in

the mix.

11. Adjust the channel’s bass and treble frequencies using the BASS and TREBLE knobs.

12. Target a specific mid-range frequency for adjustment using the FREQ knob, and then adjust that

frequency’s level using the MID knob.

13. Adjust any other channels using the same procedure as necessary.

14. To group several channels together, press the GROUP button (button will blink), and then press

the desired CHANNEL SELECT buttons. The LEDs for the selected channels will blink. Press the

GROUP button again to exit. The selected channels may then be adjusted as a group in the mix

with a single level adjustment using the VOLUME knob.

15. Save your settings to a preset by holding the STORE button and then select the target preset by

pressing any of the 16 CHANNEL SELECT buttons. Press the same CHANNEL SELECT button again

to confirm the STORE process.

16. Load a preset by holding the RECALL button and then pressing the CHANNEL SELECT button

containing the desired preset.

* Green LED flickering = audio signal activity

Red LED constant = mono channel or stereo-linked pair selected

Red LED blinking = channel is part of a selected group, but channel is not currently selected

POWERPLAY 16 (P16-M) - SETUP

1. Make sure the ON/OFF button is set to the “OFF” position.

2. Turn the OUTPUT LEVEL knob all the way down to the full counter-clockwise position.

3. Make sure the P16-M is connected to the p16-I via a CAT-5 cable at the ULTRANET IN port.

4. Plug your headphones into the PHONES jack using a TRS plug.

5. Power on the P16-M by pressing the ON/OFF button to the “ON” position.

Otros manuales para POWERPLAY P16-M

Otros manuales de Mezclador de música de Behringer

Behringer

Behringer Xair18 Manual de usuario

Behringer

Behringer VINTAGE TUBE MONSTER VT999 Instrucciones de instalación

Behringer

Behringer XENYX X1832USB Manual de usuario

Behringer

Behringer XENYX X1222USB Manual de usuario

Behringer

Behringer CP3A-M Manual de usuario

Behringer

Behringer EURORACK UBB1002 Manual de usuario

Behringer

Behringer Eurorack UB802 Manual

Behringer

Behringer Europower PMP1280S Manual de usuario

Behringer

Behringer PRO MIXER DJX750 Manual de usuario

Behringer

Behringer EURORACK UB1622FX-PRO Manual de usuario

Behringer

Behringer XENYX QX1204USB Manual de usuario

Behringer

Behringer EURODESK MX9000 User's Manual de usuario

Behringer

Behringer XENYX 1002B Instrucciones de montaje

Behringer

Behringer Pro Mixer DX626 Manual de usuario

Behringer

Behringer B-CONTROL DEEJAY BCD2000 Manual de usuario

Behringer

Behringer DANALOG DDX3216 Manual de usuario

Behringer

Behringer EURORACK UB1002FX Manual de usuario

Behringer

Behringer PRO MIXER DJX USB DJX900USB Manual de usuario

Behringer

Behringer Europower PMH2000 Manual de usuario

Behringer

Behringer Xenyx XL1600 Manual de usuario

Behringer

Behringer XENYX X1204USB Manual de usuario

Behringer

Behringer XENYX 1002 Manual de usuario

Behringer

Behringer EURORACK UB1204-PRO Manual de usuario

Behringer

Behringer X32 DIGITAL MIXER Manual de usuario

Manuales populares de Mezclador de música de otras marcas

Neve

Neve 8816 Manual de usuario

Mackie

Mackie Onyx Analogue Mixer Manual de usuario

Peavey

Peavey S-32 Sanctuary Series Manual de usuario

Rane

Rane MP 4 Manual de usuario

True

True T9 Touchscreen Console Manual de usuario

Studiomaster

Studiomaster Air Pro 24 Manual de usuario

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Manual de usuario

Roland

Roland M-160 Manual de usuario

Yamaha

Yamaha MR1642 Manual de usuario

Ecler

Ecler MAC40v Manual de usuario

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Manual de usuario

Veeder-Root

Veeder-Root TLS-350 Series Manual de usuario

Alto

Alto APM80.QUAD Manual de usuario

Omnitronic

Omnitronic PM-211 Manual de usuario

SoundCraft

SoundCraft B400 Manual de usuario

Roland

Roland SoundCanvas SC-8820 Manual de usuario

CARVIN

CARVIN RX 1200 Manual de usuario

Roland

Roland M-16E Manual de usuario