BeeVision 270 User Manual v1.3.9
Reset button: When pressed, the device is shut down gracefully. When pressed
for 3 seconds, device is forcefully shut down.
4
4 Turning ON/OFF
When the power cord is inserted into the power port and given mains voltage,
the device is automatically turned on and will be ready for use. The input mains
voltage for the power adapter provided with BeeVision dimensioners must be at
an interval between 100V-240V and 50Hz/60Hz.
To connect the BeeVision dimensioner to a computer or a local network for data
transfer, simply use an Ethernet cable. A detailed explanation of the connection
settings is provided in the Software Guide document.
In order to view the results of measurements and device settings on a monitor,
just connect one end of any standard HDMI male-to-male cable to the HDMI port
of the device and the other end to the monitor. If you use a touch-screen monitor,
connect the USB cable to one of the USB 3.0 ports on the device for enabling touch
operation. After connecting the cable for the first time, you may need to restart
the device depending on the driver of the touch-screen monitor. If you have
problems using the touch-screen, get in touch with the 3DTIM support team.
The mouse cursor is by default hidden in Volumizer UI. If you would like
to connect a mouse and a keyboard, you can enable/disable mouse
cursor with Ctrl+Shift+M combinations in your keyboard.
To turn off the device, simply unplug the power cord.
BeeVision starts in headless mode when no monitor is attached and the
device can only be controlled via Volumizer-WebUI or Volumizer API
web services. In order to bring up Volumizer GUI, connect a monitor and
reboot the device.
