Becom Bluetechnix Argos 3D P32X Manual de usuario

Argos 3D -

P32X

Quick Start Guide

Version 4

BECOM Bluetechnix GmbH

Gutheil Schoder Gasse 17

1230 Vienna

AUSTRIA

[email protected]om

www.bluetechnix.com

Argos3D-P32X –Quick Start Guide

Document No.: 900-308 / A

Publication date: February 20, 2017

Subject to change without notice. Errors excepted.

transmitted for any purpose in any form or by any means, electronically or mechanically, without expressly

written permission by Bluetechnix GmbH.

Windows is a registered trademark of Microsoft.

Table of Contents

1Unboxing .......................................................................................................................................... 5

1.1 In the box .................................................................................................................................. 5

1.2 Opening your Argos3D–P32X ................................................................................................... 5

1.3 Connecting your Argos3D–P32X .............................................................................................. 6

1.4 Connector Overview ................................................................................................................. 6

1.4.1 Connecting the power supply............................................................................................ 7

1.4.2 Connecting the Ethernet Cable ......................................................................................... 7

2Downloading the Evaluation Software ............................................................................................. 8

2.1 Support website ........................................................................................................................ 8

2.2 Start-up screen ......................................................................................................................... 9

2.3 Prepare your Network Interface Card (NIC) ............................................................................ 10

3Start using your Argos3D–P32X with ‘BltTofSuite’........................................................................ 11

4System Requirements & Support................................................................................................... 12

4.1 Support ................................................................................................................................... 12

5Product History ................................................................................ Error! Bookmark not defined.

5.1 Argos3D-P320........................................................................... Error! Bookmark not defined.

5.1.1 Version Information............................................................ Error! Bookmark not defined.

5.1.2 Anomalies .......................................................................... Error! Bookmark not defined.

5.2 Argos3D-P321........................................................................... Error! Bookmark not defined.

5.2.1 Version Information............................................................ Error! Bookmark not defined.

5.2.2 Anomalies .......................................................................... Error! Bookmark not defined.

5.3 Document Revision History .................................................................................................... 13

The information herein is given to describe certain components and shall not be considered as a guarantee

of characteristics.

Terms of delivery and rights of technical change reserved.

We hereby disclaim any warranties, including but not limited to warranties of non-infringement, regarding

circuits, descriptions and charts stated herein.

Bluetechnix makes and you receive no warranties or conditions, express, implied, statutory or in any

communication with you. Bluetechnix specifically disclaims any implied warranty of merchantability or fitness

for a particular purpose.

Bluetechnix takes no liability for any damages and errors causing of the usage of this board. The user of this

board is responsible by himself for the functionality of his application. He is allowed to use the board only if he

has the qualification. More information is found in the General Terms and Conditions (AGB).

Information

For further information on technology, delivery terms and conditions and prices please contact Bluetechnix

(http://www.bluetechnix.com).

Warning

Due to technical requirements components may contain dangerous substances.

Quick Start Guide - Argos 3D - P32X Last change: 20 February 2017

Version 4

1Unboxing

1.1 In the box

Argos3D–P32X

CAT5/7 Ethernet Cable

Quick Start Guide

Power Supply *

* Note

The power supply’s operating temperature is specified from 0 to +40°C. This represents not

the effective working temperature of the Argos3D–P32X sensor!

1.2 Opening your Argos3D–P32X

To access the connector compartment unscrew the two screws on the Argos3D-P32X front and take

off the connector compartment lid.

Figure 1-1: Argos3D–P32X connector compartment screw positions

Quick Start Guide - Argos 3D - P32X Last change: 20 February 2017

Version 4

1.3 Connecting your Argos3D–P32X

1.4 Connector Overview

a. Power Connector

b. Ethernet

c. General purpose input 1 & 2

d. General purpose output 1 & 2

e. Modulation Light Interface

f. Trigger

g. RS232 / RS485

h. DIP-Switch

i. Reset-Button

j. Debug-UART

k. Status LED

Marks Pin #1

b a c f

ed g i

h j

Figure 1-2: Argos3D–P32X connectors and interfaces

Note

Please follow the next steps in the right order to get your ‘Argos3D-P32X’ up and running

correctly.

Quick Start Guide - Argos 3D - P32X Last change: 20 February 2017

Version 4

1.4.1 Connecting the power supply

To ensure, that your Argos3D–P32X works correctly, connect the ‘Argos3D’to a 12-30V DC power supply

using connector (a) and wait for approximately 20 seconds until the camera boots up.

Pin assignment on the power connector (a): Pin #1: +12V to +30V, Pin#2: GND

Note

The power supply connector is protected against wrong polarity but the ‘Argos3D’ will not

work in case you don’t use the correct polarity! If the Argos3D–P32X doesn’t work please

check the power supply polarity first!

1.4.2 Connecting the Ethernet Cable

Plug in the Ethernet cable (b) and connect your Argos3D–P32X to your PC.

Figure 1-3: Argos3D–P32X with connected power supply and Ethernet cable

Quick Start Guide - Argos 3D - P32X Last change: 20 February 2017

Version 4

2Downloading the Evaluation Software

Please log in to our support website at https://support.bluetechnix.com/ and download the Argos-P32X

customer software package. This package also includes the Bluetechnix ToF-Suite.

2.1 Support website

Select ‚free access‘

Figure 2-1: Download Evaluation Package

Quick Start Guide - Argos 3D - P32X Last change: 20 February 2017

Version 4

2.2 Start-up screen

Figure 2-2: Start-up screen

Please select your product: Argos 3D –P32X

Please follow the instructions on the WEB-Site

Quick Start Guide - Argos 3D - P32X Last change: 20 February 2017

Version 4

2.3 Prepare your Network Interface Card (NIC)

Once you have connected your Argos3D–P32X to a Network Interface Card (NIC) of your PC give this NIC

the IP-Address 192.168.0.1 with a subnet mask of 255.255.255.0.

No driver must be installed on your PC!

The Argos3D–P32X uses IP-Address 192.168.0.10 with subnet mask 255.255.255.0.

Tabla de contenidos

Otros manuales de Unidad de control de Becom

Becom

Becom CM-BF527 Instrucciones de uso

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario