Becker CentralControl CC41 Manual de usuario
CC41
Stand 07/2021
First steps
Short instruction
3
Aufbau und AnschlüsseFirst steps
•Plug in the mains cable and wait approx. 5 s
•The red LED on the front flashes red and
blue alternately several times (change of
network configuration)
•After that, the blue LED lights up continuously
and the red LED flashes cyclically, indicating
that the access point is activated - the unit is
now in setup mode
4
Aufbau und AnschlüsseFirst steps
•Install the Becker CentralControl app
(iOS/Android) using the following QR code
•(also included in the operating instructions),
or enter "Becker CentralControl" in the
search field of the AppStore or PlayStore.
•Start the app
5
Aufbau und AnschlüsseFirst steps
•Select the CentralControl CC41
6
Aufbau und AnschlüsseFirst steps
•You will be advised that the CC41 must be
in set-up mode
•If the CentralControl is already in your
network, for example when connected with
a cable, it will appear under
"CentralControls in your network".
• Press „Continue“
7
Aufbau und AnschlüsseFirst steps
•Allow your mobile phone to connect to the
Access Point of the CC41 and press
"Connect".
•If you are asked for location permissions,
please allow them - the app needs them to
find your CentralControl in the network later.
8
Aufbau und AnschlüsseFirst steps
•Select your WLAN from the list of networks
foundTragen Sie den Netzwerkschlüssel ein
•Tap on „Connect“
•Attention! Please do not use guest networks
to operate your CentralControl. These
usually prohibit communication between
your smartphone and other network
participants such as the CentralControl.
9
Aufbau und AnschlüsseFirst steps
•The CC41 now connects to your home
network
•The LED in the CC41 lights up blue to
indicate that the connection was successful.
•Make sure that your smartphone and the
CentralControl are then in the same
network.
10
Aufbau und AnschlüsseFirst steps
•If the connection was successful, your
CentralControl will now be found
automatically
•Now tap on the upper menu item or
alternatively set up remote access directly
via the Becker Gateway server
•Done! You can now control your
CentralControl with your smartphone
Otros manuales para CentralControl CC41
1
Tabla de contenidos
Otros manuales de Automatización del hogar de Becker
