2
www.szbecen.com
product features
Light source: 200W LED white light module maximum power: 290W
Power supply: wide voltage input switching power supply 100V-240V 50-60Hz
Color temperature: 7500K
Lamp life: 50000 hours
Angle of light spot: 7-21 degrees
Control mode: 18 channels, DMX512 signal input, voice control, automatic operation.
X/Y scan: 540 degrees, vertical: 270 degrees
Color: 9 color plates + white light, rainbow effect, can be positioned arbitrarily.
Pattern: 7 pluggable pattern, pattern rotation, pattern water effect fixed pattern: 10 fixed pattern + white
light, with jitter, positive and negative water effect dimming: 0-100 linear dimming
Stroboscopic: 0-25ZH/S per second, synchronous pulse stroboscopic, random pulse stroboscopic effect
plate: 4 prism, with positive and negative rotation effect.
Display: LCD display, Chinese and English display, reverse display
product size: 343*232*537MM
Package size: 57x45x44MM net weight: 15KG
Gross weight: 18KG
Safety instructions
If the product has been exposed to an extremely unstable temperature (such as after transportation),
please do not immediately attach the power to the product, because the water droplets produced by
the temperature change may damage the product. Please use it after the product is restored to normal
temperature.
This product can be used in 90-260V voltage range and is used for indoor products. Please make sure
that the voltage is not higher than the product's acceptable range!! Power plug must be inserted into I
socket with good protection. Green or tea green conductors must be grounded.
Please check the power supply line of this product. Ensure that the power cord is not folded or
damaged, and does not connect to other lines. Special attention should be paid when connecting
power lines or related wiring. Always remove the power before using the product or before cleaning.
Before you use the product, please familiarize yourself with the operation function of the product.
Please do not expose children or unprofessional people to products.
Please don't shake this product. Do not use brute force when installing or operating products. Do not
let non professionals operate the product. Most of the damage is caused by unprofessional operation.
The products are not equipped with relevant maintenance accessories. The maintenance and repair of
products can only be done by professionals. Please do not alter the product without authorization,
otherwise it may damage the product, so the damage caused is not within the scope of warranty.
Moreover, unprofessional operation may lead to short circuit, burn or electric shock, and so on.
