Becen BC-M260 Manual de usuario

USER’S MANUAL

Model: BC-M260

260W Beam Moving Head Light

Package Includes:

1 x beam moving head light

1 x clamp

1 x handle

1 x safe cable

1 x power cable

1 x DMX cable

Please read this manual before use

Contents

Chapter 1 Safety Guidance and Technical Parameters ..................................................1

1. Safety guidance................................................................................................1

2. Technical Specifications ..................................................................................2

Chapter 2 Panel Operation.............................................................................................3

1. An Overview....................................................................................................3

2. Operation..........................................................................................................4

2.1. Please use visual touch or assisted input to operate the lamp (Touch-enabled product) 4

2.2. Input parameters........................................................................................4

2.3. Set the Boolean parameter ........................................................................4

2.4. Subparameter page (parameters)...............................................................5

3. Function operations and parameter setting ......................................................5

3.1. Set the DMX address code........................................................................5

3.2. Set working mode of the lamp..................................................................6

3.3. Panel display settings................................................................................7

3.4. Scene mode...............................................................................................8

3.5. Set work parameters of the lamp...............................................................8

3.6. Check current status of the lamp.............................................................10

Chapter 3 Description of Channels..............................................................................11

1. Channel table..................................................................................................11

Chapter 4 Common Failures and Matters Needing Attention......................................14

1. Handling of common failures ........................................................................14

2. Matters needing attention...............................................................................15

3. Matters needing attention when RDM is used...............................................16

4. Installation of the lamp ..................................................................................16

5. Declaration.....................................................................................................17

www.szbecen.com

Chapter 1 Safety Guidance and Technical

Parameters

Attention

The equipment is well packaged when it leaves the factory. Please follow the user's manual, and the

machine failure is not covered by the warranty due to human reasons

1. Safety guidance

Please keep this instruction manual as a basis for a future consultation, and if you sell

this product to other users, please make sure that they also get it.

The lamp is only suitable for indoor drying places.

The installation and operation of the lamps should be carried out by professionals.



Equipment must be installed in a well-ventilated place, at least 50 cm from the adjacent

Ensure that the vents are



Do

The new lamp may have little smoke or odor, and will disappear after 15 minutes of



Before opening the lamp, please carefully check whether the power cord is damaged. If there is



Avoid flammable liquid, water, or metal and other electrical conductors from entering the lamp

interior to avoid electric shock or fire. If any foreign body enters the lamp, please cut off the

Avoid operating in a dirty and dusty environment,and clean and maintain the lamps regularly



Disconnect the power supply before replacing the fuse or light bulb.



There are no available parts inside the lamp, do not open the lamp shell without authorization

www.szbecen.com

Do not operate the machine by yourself. Non-professional operation will cause damage to the

equipment or functional failure. If maintenance is needed, please contact the nearest authorized

service center.



High temperature bulb explosion risk, do not open the lamp within 15 minutes of power

failu

Please replace the bulb when damaged, heat-



The light bulb will be very hot when the lamp is running. Do not touch it with your bare

Do not operate the machine when the bulb is not without a protective cover or the housing is

damaged.

2. Technical Specifications

Light source: 280W

Expected life of lamp bulbs: 2000 hours

Color temperature: 7800K

Voltage: AC100-240V,50/60HZ

Total power: 400W

Power port: Input/output port of Power Connector

Signal interface: Three-core DMX/RDM signal input/output

Advanced optical systems ensure clear image quality.

Beam angel: 0-2°

Control panel: LCD color panel +5 buttons; Chinese and English display interface;

Control mode: DMX512, RDM, self-propelled, master-slave, voice control functions

Control channel: 16CH

X-axis/Y-axis: 16-bit precision scanning; photoelectric reset system is used for horizontal and

vertical direction of X-axis 540° and Y-axis 270°. Accidental collision error can be

automatically retrieved and reset.

Color disc: One fixed color disc; a total of 13 kinds of colors (including white); the two-way

rainbow effect can achieve half-color, panchromatic, single and double color gradient and slow

motions in positive and negative directions. It also has Hall, magnet positioning and automatic

error correction function in any angle.

Fixed pattern plate: One fixed pattern plate, 10 kinds of metal patterns +3 kinds of glass

patterns. It also has Hall, magnet positioning and automatic error correction function in any

angle.

Dual Prism: It is equipped with a bi-directionally rotated and stacked 8 prism and a 16+8

Prism.

Stroboscopic: Mechanical stroboscopic design is used; the stroboscopic frequency is as high as

1-14 times/second; the stroboscopic frequency speed can be adjusted arbitrarily and the smooth

dimming is between 0% and 100%.

Independent atomizing effect

Independent seven-color sheets

www.szbecen.com

Dust-proof and oil-proof design

Electronic ballast

Bubble point system: The long-distance lamp bulb control system is designed to intelligently

control the openness and closure of lamp bulbs control system in distance and effectively

extend the service life of the lamp bulb.

Speed regulation through intelligent fan: Intelligent fan speed control: The fan will

automatically reduce its speed and reduce the noise of the fan when there is no point bubble or

the lamp is under the strobos-closed light state so as to create good performance environments.

Use DMX to connect and update the software.

Work environment

Maximum tolerable ambient temperature: 45°C

Maximum tolerable surface temperature: 65°C

The lowest acceptable operating temperature: -5°C

Chapter 2 Panel Operation

1. An Overview

The schematic diagram of lamp panel is shown in Figure 1. The upper title shows names of the

lamps and the lower part in the status bar, which shows signals of the current lamps and states

and faults of the lamp bulb (“ERR” will be displayed when there is no fault information;

otherwise, “NOR” will be displayed) and so on.

This lamp supports DMX/RDM protocol. When the lamp is searched by the RDM console, the

three letters "RDM" will appear on the panel to indicate that the lamp is enumerated normally.

In order to display and operate similar “Android operating system”, you can use your fingertip

or blunt object to click corresponding items.

Note: Do not use sharp objects to click the display so as not to damage it.

Figure 1 Schematic diagram of the display panel

www.szbecen.com

2. Operation

2.1 Please use visual touch or assisted input to operate the lamp (Touch-enabled

product)

The left zone is TFT display area and the touch area. Click the panel with your finger or hard

objects with dull surface and you can set parameters or view the status and do other operations.

The right area is used for auxiliary input. If you do not use the touch function of TFT, you can

use the auxiliary input to select the items you want to set or view and complete the operation.

2.2 Input parameters

If values need to be input into the selected parameter items, the window as shown in Figure 2 will

appear:

Fig 2. Number setting interface

Set the value: You can directly pull the slider to quickly set the required value or click the "up"

or "down" button on the right to set the required value accurately or use the auxiliary input to

set related values.

Apply the value: After data are well set by the "up" or "down" button, if you press the "Apply"

button in the lower left corner, the value will be sent to the lamp button immediately, but it is

not saved at that time.

Save the value: Click the "OK" button in the lower right corner to save the current value to the

internal memory. The saved values will be applied to the lamp next time you turn the lamp on.

2.3 Set the Boolean parameter

When the parameter is set to a Boolean value (such as ON or OFF), you only need to click

corresponding items directly to switch the parameters. The modified parameters will be saved

to the internal memory. Press the parameter option on the right and the corresponding options

will become gray. After you release your hand, corresponding parameters will be changed and

saved. If the parameter option is not the parameter you want to change, you can move your

finger to another part of the screen and corresponding parameters will not change.

Important Boolean parameters can be set through the window, as shown in Figure 3 below:

www.szbecen.com

Figure 3 Confirm the input window

2.4 Sub-parameter page (parameters)

3. Function operations and parameter setting

Enter the setting interface as shown in Figure 6-1:

In the main interface, you can enter corresponding parameter setting interfaces by selecting the

six buttons.

In the parameter setting interface, you can press the blue option on the left to quickly switch to

other setting interfaces.

3.1 Set the DMX address code

DMX address and channel mode can be set through the page shown in Figure 6-1.

The menu settings of lamps optimize the address setting. Operations for several kinds of address

setting are shown as follows:

Select “Previous” or “Next”, the address code of the precious one or the next one will be

automatically calculated according to the current address code and channel data. They can be

set quickly;

Click the address code value and you can enter the numeric editing window where you can set

any valid address codes. The lamp will automatically obtain current channel numbers of the

lamp and automatically filter unusable address codes (512- current channel number).

The lamp supports RDM protocol. You can set the address code of the lamp through RDM

www.szbecen.com

remotely.

Two buttons are provided:

Channel mode: Different channel modes can be selected circularly;

Lamp reset: Reset all motors.

3.2 Set working mode of the lamp

Operations modes of the lamp can be set to control the lamp bulb according to the page shown

in Figure 6-2. The lamp supports four operation modes (DMX mode, self-propelled mode,

voice-activated mode and scene mode). Please refer to the previous section for parameter value

setting. Detailed parameters are described as follows:

Operation mode

DMX mode

Under the console mode, it can receive DMX signal and RDM

signal.

Under the console mode, it can receive DMX signal and RDM

signal.

Self-propelled

mode

The lamp will be operated automatically according to the built-in

program.

Voice-activate

d mode

When the lamp detects strong sounds, the lamp will

automatically run a scene according to the built-in program,

otherwise, the last scene will continue.

Scene

mode 01

The lamp operates according to the scenes set; it supports the

customized editing of up to 10 scenes at most.

1~10

Output specified scenarios

Automatic

operation

Automatically output scenes in the sequence of

setting scene time (not 0). Scenes with time of 0

will be automatically ignored.

Master-slave

choice

It will become effective when it is not under DMX mode; please

select data output mode and the lamp will automatically detect

DMX status and automatically switch output to prevent data

conflicts.

Console

The lamp will be operated according to the built-in

program; if DMX has no signal, data will be output

(synchronization); otherwise, no data will be output.

Slave

The lamp will be operated according to the built-in

program and will not output data (it will not be

synchronized with other lamps).

Automatic

operation

If DMX has no signal, lamp will be operated

according to the built-in program; otherwise, the

lamp will be operated according to the DMX signal.

On-off

operation of

the lamp bulb

(Light sources of lamp bulbs) A confirmation dialog box will pop

up; select "sure" to confirm the current operation. Then, switch

on or off the lamp bulb and the time interval shall be set to be 30

seconds.

www.szbecen.com

Output of the current lamp bulb is turned off.

Open

The current light output is turned on.

Scene mode is suitable for single lamp or small numbers of scenes. You only need to output

fixed scenes or operate a simple program. The console may not be connected; you only need to

edit it on the scene page.

If the light source of the lamp is the lamp bulb, you need to wait for 10 minutes after you turn

off the lamp bulb. You can turn on the lamp bulb then.

3.3 Panel display settings

The lamp supports Chinese-English settings and upside-down display. You can set

corresponding parameter according to operations shown in Figure 6-3. Specific menu contents

are shown in the table below:

Display settings

Language

Set languages displayed

English

English display

Chinese

Chinese display

Screen

protection

Set screen display content or mode if there is no operation on the

screen within 30 seconds.

Keep the last operation page; the screen is on.

Mode 1

The screen is off

Mode 2

Black screen; address code of current lamp will be

displayed on the bottom left corner.

Mode 3

Display the trademark information, address code and

operation mode.

Screen

rotation

Set the display direction of the screen

Non-reverse display

Open

Reverse display

Automati

Automatically detect lamp direction and switch the

display direction.

DMX

indication

Set the indication mode of DMX signal indicator lamp

Mode 1

It lights up when there is a signal and goes off when

there is no signal.

Mode 2

It goes off when there is a signal and lights up when

there is no signal.

Mode 3

If flashes when there is a signal and goes off when there

is no signal.

Signal

indication

brightness

Set the brightness of the signal indicator

1~10

10 grades

Screen

backlight

Set the brightness of the screen backlight after there is no operation

for 10 seconds. All lights will be on during operation.

1~10

10 grades

www.szbecen.com

Touch switch

Select whether to disable the touch screen; when the screen touch

is accidentally damaged, you may disable the touch function and

use the auxiliary input to set the lamp.

Touch-screen

calibration

When the screen touch is not accurate, you can enter the correction

page to correct the screen.

The lamp supports touch operation. If the touch screen does not work, you can enter the

calibration page to rectify the touch precision of the touch screen again. Under normal

situations, you should not enter this page. If the touch screen is damaged, please select “Disable

Touch Switch”.

3.4 Scene mode

Enter the page displayed on Figure 6-4 and the lamp will enter the scene editing mode. On this

page, the lamp will not receive DMX console data. The edited data will be reflected to the lamp

instantly.

Contents of the page are based on the currently selected channel and the channel contents and

orders displayed are the same as those of the lamp channel table. 10 scenes can be edited on

this page and they are shown in the table below:

Scene mode

Scene

selection

Select the scene to operate on at present

1~10

Setup formats for 10 scenes

Scene time

Set the retention time of the current scene on automatic mode; unit:

0.1 second

The current scene does not

participate in the automatic scene

output

1-255

From 0.. 1 to 25.5 seconds

1. X-axis

0-255

Set data for each channel so that

the display contents and orders can

match the channel table for the

lamp

……

0-255

……

0-255

N. function

0-255

If effective reset data are edited by the reset channel in the scene, the lamps will be reset.

However, after that, values of corresponding reset channels will be automatically reset to zero

so as to prevent multiple consecutive resets.

Check this page to obtain the current channel table order of the lamp. Refer to the detailed

channel description for channel data.

3.5 Set work parameters of the lamp

Enter the page shown in Figure 6-5 to adjust on-field parameters of the lamp and to facilitate

field installation of the lamp:

Tabla de contenidos

Otros manuales de Luminaria de Becen

Becen

Becen BC-M211 Manual de usuario

Becen

Becen BC-M375 Manual de usuario

Becen

Becen BC-CMY195 Manual de usuario

Manuales populares de Luminaria de otras marcas

Emos

Emos CLASSIC ZY1431T Manual de usuario

Westinghouse

Westinghouse Outdoor Lighting Fixture Manual de usuario

Hedler

Hedler C 12 silent Manual de usuario

Blizzard Lighting

Blizzard Lighting Puck: CSI Manual de usuario

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manual de usuario

Lightmaxx

Lightmaxx Shaft 5R Manual de usuario

Triarch

Triarch 31083 Manual de usuario

Philips

Philips 32614 Series Manual de usuario

IKEA

IKEA TIVED Manual de usuario

Lightolier

Lightolier LP200 Manual de usuario

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manual de usuario

Martin

Martin MAC 250 Krypton Manual de usuario

Cooper Lighting

Cooper Lighting Halo L3232E Manual de usuario

Stageline

Stageline ODW-2410RGBW Manual de usuario

Light Sky

Light Sky Tornado Series Manual de usuario

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manual de usuario

Lightolier

Lightolier Lytespan 83ED17S Manual de usuario

Lightolier

Lightolier Calculite CS8226 Manual de usuario