BCM EBC-3615 Manual de usuario
Quick Installation Guide
EBC-3615/3615L
All-in-One Transmeta TM5400 Single Board with Dual LCD, AC97 Audio,
& Dual 10/100Base-Tx Ethernet
1st Ed. – 8 April 2002
EBC-3615/3615L
EBC-3615/3615L Quick Installation Guide
2
FCC STATEMENT
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINTST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Quick Installation Guide
EBC-3615/3615L Quick Installation Guide 3
Notice:
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright Notice
Copyright 2002 BCM Advanced Research, ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
BCM Advanced Research. reserves the right to make changes, without notice, to any
product, including circuits and/or software described or contained in this manual in order to
improve design and/or performance. BCM Advanced Research assumes no responsibility
or liability for the use of the described product(s), conveys no license or title under any
patent, copyright, or mask work rights to these products, and makes no representations or
warranties that these products are free from patent, copyright, or mask work right
infringement, unless otherwise specified. Applications that are described in this manual are
for illustration purposes only. BCM Advanced Research. makes no representation or
warranty that such application will be suitable for the specified use without further testing or
modification.
EBC-3615/3615L
EBC-3615/3615L Quick Installation Guide
4
Life Support Policy
BCM Advanced Research’s PRODUCTS ARE NOT FOR USE AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR
WRITTEN APPROVAL OF BCM Advanced Research Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into body, or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to
perform can be reasonably expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
A Message to the Customer
BCM Customer Services
Each and every BCM’s product is built to the most exacting specifications to ensure reliable
performance in the harsh and demanding conditions typical of industrial environments.
Whether your new BCM device is destined for the laboratory or the factory floor, you can be
assured that your product will provide the reliability and ease of operation for which the
name BCM has come to be known.
Your satisfaction is our primary concern. Here is a guide to BCM’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Quick Installation Guide
EBC-3615/3615L Quick Installation Guide 5
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual, please visit our Web site at:
http://www.bcmcom.com/
If you still cannot find the answer, gather all the information or questions that apply to your
problem, and with the product close at hand, call your dealer. Our dealers are well trained
and ready to give you the support you need to get the most from your BCM’s products. In
fact, most problems reported are minor and are able to be easily solved over the phone.
BCM Advanced Research
1Hughes,
Irvine, CA, 92618
Tel: 949-470-1888
Fax: 949-470-0917
http://www.bcmcom.com
E-mail: [email protected]m
EBC-3615/3615L
EBC-3615/3615L Quick Installation Guide
6
Product Warranty
BCM warrants to you, the original purchaser, that each of its products will be free from
defects in materials and workmanship.
1. This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by BCM, or which have been subject to
misuse, abuse, accident or improper installation. BCM assumes no liability under the
terms of this warranty as a consequence of such events. Because of BCM’s high
quality-control standards and rigorous testing, most of our customers never need to use
our repair service. If any of BCM’s products is defective, it will be repaired or replaced at
no charge during the warranty period. For out-of-warranty repairs, you will be billed
according to the cost of replacement materials, service time, and freight. Please consult
your dealer for more details.
Quick Installation Guide
EBC-3615/3615L Quick Installation Guide 7
Packing List
Before you begin installing your single board, please make sure that the following materials
have been shipped:
1 EBC-3615/3615L All-in-One Transmeta TM5400 Computing Module
1 Quick Installation Guide
1 Audio jacks and USB connector daughter board
1 CD-ROM contains the followings:
— User’s Manual (this manual in PDF file)
— Ethernet driver and utilities
— VGA drivers and utilities
— Audio drivers and utilities
— Latest BIOS (as of the CD-ROM was made)
Cable set includes the followings:
— 1 PS/2 keyboard and mouse Y cable (6-pin, Mini-DIN)
—1IDE HDD cable(40-pin,pitch 2.54mm)
— 1 FDD cable (34-pin, pitch 2.0mm)
— 1 bracket with one Printer port cable (26-pin, pitch 2.0mm) and one Serial port
cable (10-pin, pitch 2.0mm)
— 2 flat cables (10-pin, pitch 2.0mm) for connecting the Audio/USB daughter board to
the EBC-3615
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.
EBC-3615/3615L
EBC-3615/3615L Quick Installation Guide
8
1. Safety Precautions
1.1 Warning!
Always completely disconnect the power cord from your chassis whenever
you work with the hardware. Do not make connections while the power is on.
Sensitive electronic components can be damaged by sudden power surges.
Only experienced electronics personnel should open the PC chassis.
1.2 Caution!
Always ground yourself to remove any static charge before touching the
CPU card. Modern electronic devices are very sensitive to static electric
charges. As a safety precaution, use a grounding wrist strap at all times.
Place all electronic components in a static-dissipative surface or
static-shielded bag when they are not in the chassis.
Quick Installation Guide
EBC-3615/3615L Quick Installation Guide 9
2. Jumper & Connector
2.1 Jumper & Connector Layout
EBC-3615/3615L
EBC-3615/3615L Quick Installation Guide
10
2.2 Jumper and Connector List
Connectors on the board are linked to external devices such as hard disk drives, a
keyboard, or floppy drives. In addition, the board has a number of jumpers that allow
you to configure your system to suit your application.
The following tables list the function of each of the board's jumpers and connectors.
Jumpers
Label Function Note
J1 Clear CMOS & PC/104+ voltage select 3 x 2 header, pitch 2.0mm
J5, J6 COM2 RS-232/422/485 select 3 x 2 header, pitch 2.0mm
6 x 2 header, pitch 2.0mm
(J5)
ATATX1 AT / ATX power select 3 x 1 header, pitch 2.0mm
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Computadora de placa única de BCM
Manuales populares de Computadora de placa única de otras marcas
WIN Enterprises
WIN Enterprises PL-80910 Manual de usuario
AXIOMTEK
AXIOMTEK SBC81206 Series Manual de usuario
Embest
Embest SOM-PH8800 Manual de usuario
SeaLevel
SeaLevel SBC-R9 Manual de usuario
SMART Embedded Computing
SMART Embedded Computing ATCA-8310 Manual de usuario
WinSystems
WinSystems PPM-LX800-G Manual de usuario
GIGAIPC
GIGAIPC QBiX-PPC Series Manual de usuario
OLIMEX
OLIMEX A10S-OLinuXino-MICRO Manual de usuario
Commell
Commell FS-978 Manual de usuario
GIGAIPC
GIGAIPC QBiP-8665A/ Manual de usuario
VersaLogic
VersaLogic Python EBX-11 Manual de usuario
Micro Computer Specialists
Micro Computer Specialists IRV-3702 Manual de usuario
