BCM MX266 Manual de usuario

Motherboard

with VIA Eden Processor

MX266

User’s Manual

http://www.bcmcom.com

Declaration

Rights:

Information in this document is subject to change without notice.

No part of this manual, including but not limited to the products and software described in it, may

be reproduced, transmitted, transcribes, stored in a retrieval system, or translated in any form or by

any means without the expressed written permission from the manufacturer.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies and are used only for identification or explanation

purposes without intent to infringe. VIA Eden®are registered trademarks of VIA Technologies

Inc, .

zMicrosoft and Windows®are registered trademarks of Microsoft Corporation.

zPhoenix®and Award®are registered trademarks of Phoenix Technologies LTD..

Responsibility:

This manual is provided “As-Is” with no warranties of any kind, either expressed or implied,

including, but not limited to the implied warranties or conditions of this product’s fitness for any

particular purpose. In no event shall we be liable for any loss of profits, loss of business, loss of

data, interruption of business, or indirect, special, incidental, or consequential damages of any kind,

even the possibility of such damages arising from any defect or error in this manual or product. We

reserve the right to modify and update the user manual without prior notice.

WARNING:

There is a danger of a new battery exploding if it is incorrectly installed, replace your system’s

CMOS RAM battery only with the identical CR-2032 3V Lithium-Ion coin cell (or equivalent)

battery type to avoid risk of personal injury or physical damage to your equipment. Do not dispose

battery along with household waste. Contact your local waste disposal agency for address nearest

disposal site or as required by the local ordinance (where applicable).

CAUTION:

References:

This manual is created and written by BCM Technical Dept., but not limited, to the information

from the MX266 External Production Specifications, and MX266 Specifications. If any comments,

suggestions, or errors for this manual, please write an e-mail to support@bcmcom.com.

Compliance & Certificate

ISO 9001 Certificate:

This device was produced in our plant with advanced quality system certified by DNV QA Ltd. in

according to ISO 9001. This Certificate is valid for:

DESIGN & MANUFACTURE OF MOTHERBOARD AND PERSONAL COMPUTERS.

CE Declaration:

CE marking is a visible declaration by the manufacturer or his authorized representatives

that the electrical equipment to which it relates satisfies all the provisions of the 1994

Regulations.

FCC Compliance:

FCC stands for Federal Communications Commission.

This product complies with FCC Rules Part 15 and has been tested, and complied with the EMI

rules by a certified body. In normal operation, there shall be no harmful interference caused by this

device nor shall this device accept any interference received, including interference that may cause

undesired operation of this product.

Easy Installation

Easy Installation Steps

The following “Easy Installation” steps are for users

accustomed to the assembly of a computer system. For those

individuals requiring more specific information, please refer

to the more detailed descriptions located within the latter

chapters of this manual.

Note: You must keep your power cable unplugged until the

following installation steps are completed.

Getting Started

-Touch a grounded metal surface to release static electricity

stored in your body before unpacking your motherboard. For

details please refer to Precaution.

-Install the 3.3 volt un-

uffered DDR SDRAM into the 184

pin DIMM slots.

-Plug in any peripheral card(s) that you want to be included in

the setup.

-Plug in all cables included in the package except for the

power cord.

-Please recheck all steps to ensure no mistakes have been

made and then plug in the power cord and turn on the power

to enter the BIOS setup, Chapter 3.

USER’S NOTICE 1

MANUAL REVISION INFORMATION 1

COOLING SOLUTIONS 1

CHAPTER 1 INTRODUCTION OF MX266 MOTHERBOARD

1-1 FEATURE OF MOTHERBOARD 3

1-2 SPECIFICATION 4

1-3 LAYOUT DIAGRAM 5

1-4 JUMPER & CONNECTOR SETTING 6

CHAPTER 2 HARDWARE INSTALLATION

2-1 HARDWARE INSTALLATION STEPS 8

2-2 CHECKING MOTHERBOARD'S JUMPER SETTING 8

2-3 INSTALL CPU 10

2-3-1 GLOSSARY 10

2-3-2 ABOUT INTEL PENTIUM 4 478-PIN CPU 11

2-4 INSTALL MEMORY 12

2-5 EXPANSION CARD 13

2-5-1 PROCEDURE FOR EXPANSION CARD INSTALLATION 13

2-5-2 ASSIGNING IRQ FOR EXPANSION CARD 13

2-5-3 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD 14

2-6 CONNECTORS, HEADERS 15

2-6-1 CONNECTORS 15

2-6-2 HEADERS 19

2-7 STARTING UP YOUR COMPUTER 23

CHAPTER 3 INTRODUCING BIOS

3-1 ENTERING SETUP 24

3-2 GETTING HELP 24

3-3 THE MAIN MENU 25

3-4 STANDARD CMOS FEATURES 27

3-5 ADVANCED BIOS FEATURES 29

3-6 ADVANCED CHIPSET FEATURES 32

3-6-1 DRAM TIMING SETTINGS 33

3-7 INTEGRATED PERIPHERALS 34

3-7-1 ONBOARD IDE FUNCTION 35

3-7-2 ONBOARD DEVICE FUNCTION 37

3-7-3 ONBOARD SUPER IO FUNCTION 38

3-8 POWER MANAGEMENT SETUP 40

3-9 PNP/PCI CONFIGURATION SETUP 42

3-10 PC HEALTH STATUS 43

3-11 MISCELLANEOUS CONTROL 44

3-12 LOAD STANDARD/OPTIMIZED DEFAULTS 44

3-13 SET SUPERVISOR/USER PASSWORD 45

MX266 Motherboard I/O Mechanical Draw 47

TABLE OF CONTENT

USER’S NOTICE

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE

REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR

BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER.

THIS MANUAL CONTAINS ALL INFORMATION NECESSARY TO USE OF MX266 MOTHER-

BOARD AND WE DO ASSURE THIS MANUAL CONTENT AS MANY INFORMATION AS

POSSIBLE, BUT WE RESERVE RIGHT TO CHANGE, UPDATE ANYTIME WITHOUT PRIOR

NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY

KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR

CONSEQUENTIAL DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF

BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS OF ANY KIND ALIKE).

PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE

REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND

THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S

BENEFIT, WITHOUT INTENT TO INFRINGEMENT.

Manual Revision Information

Reversion Revision History Date

1.0 First Release Sept. 2004

1.01 Update IDE connector orientation and add Signal Pin Out Oct. 2004

1.02 Update audio header signal pin out Feb. 2005

Item Checklist

5MX266

580 wire ATA66/100 IDE cable

5SATA data cable

52 COM port cable (DB9)

5CD for motherboard utilities

5Standard I/O Shield for MX266

5MX266 User’s Manual on CD (Digital Format)

5MX266 Quick Reference Guide

VIA Eden ESP Processor Family

Advanced CoolStream Architecture

The MX266 has been design with VIA Eden processor and CLE266 Chipset that incorporate with the low

heat and high performance x86 processor

The VIA Eden ESP10000 and ESP8000 employ VIA's advanced CoolStream™ architecture that is packed

with new digital media performance features, including support for sixteen pipeline stages, SSE multimedia

instructions, StepAhead™ Advanced Branch Prediction, an efficiency- enhanced 64KB Full-Speed

Exclusive L2 cache with 16-way associativity, and a full-speed FPU.

When coupled with the VIA CLE266 chipset, the VIA Eden ESP10000 and ESP8000 deliver exceptional

performance for all the most critical data streaming, Internet, productivity, and digital media applications,

including Voice over IP, video conferencing, web browsing, digital video, and MP3 and DVD playback.

Designed for entertainment and communication applications, the VIA CLE266 chipset integrates hardware

MPEG-2 decoding and video scaling for high quality DVD acceleration and an integrated 128-bit 2D and

64-bit 3D graphics engine with internal AGP 8X and Alpha Blending for multimedia applications. Together,

the VIA Eden ESP processors and CLE266 chipset provide the ultimate low power digital media platform

through additional support for DDR266, USB 2.0, TV-out, VIA Vinyl 5.1 surround sound and integrated

networking that is highly suited to cool, quiet and low profile digital media devices.

VIA Eden URL

http://www.via.com.tw/en/Products/eden_esp10000.jsp

Chapter 1

Introduction

1-1 Feature of motherboard

The MX266 motherboard is built with VIA Eden ESP Series Processor and CLE266 Chipset with integrated

128bit 2D/ 3D graphics engine, 8X AGP, mini PCI, dual LAN, serial ATA, and LVDS panel support, memory

size expandable to 1.0GB. MX266 provide ultimate low power communication and digital media platform

solution.

The MX266 motherboard use the VIA CLE266 & VT8237 Chipset Supports 133MHz System Bus in data

transfer rate, This motherboard provided a wide range of memory choices with 100/133MHz DDR

SDRAM clock frequency to support DDR266/200 DDR SDRAM. MX266 also offers ULTRA ATA 133

and SATA RAID 0 or 1 provide speedier HDD throughout that boosts overall system performance.

With integrated 8x AGP 2D/3D Graphics Accelerator which supports 128bit 2D/ 3D graphics engine, supports

hardware motion compensation assist for software MPEG/DVD decode, makes this board a low cost and high

performance solution. The MX266 also provide DFP support for those who wish to use of a digital display

equip with LVDS TFT panel.

The MX266 motherboard equip with dual onboard LAN , one VT8237 Ethernet controller with VT6103

PHY 10/100 and one Realtek RTL8100C 10/100 PCI LAN Controller.

Also integrated onboard an AC’97 2.2 VIA VT1612A Audio CODEC, which is fully compatible with

Sound Blaster Pro®that gives you the best stereo sound quality and compatibility.

With USB control as well as capability of expanding to 8 USB2.0 ports to meet faster data transfer, and

built-in hardware monitor function. This enable system monitor and protect your computer.

MX266 does provides high performance & Longevity for Embedded Application. It is really a wise choice

of computing solution.

1-2 Specification

Spec Description

Design ∗Mini ITX form factor 6 layers PCB size: 6.69”(W) x 6.69”(D) (170 x

170 mm)

Chipset ∗VIA VT8623 North Bridge Chipset

∗VIA VT8237 South Bridge Chipset

CPU Socket

∗Support VIA Eden ESP10000 (Nehemiah) processor 2x64K cache on

0.13 micron process EBGA processor.

∗CPU bus Frequency 133MHz

∗Reserves support for future Eden processors

Video Display

∗Integrated Intel High Performance 2D/3D

∗Video Memory 8/ 16/ 32/ 64 SMA Technology

∗48-bit LVDS Interface

Memory Socket ∗184-pin DDR SDRAM module socket 1x

∗Support Memory Type up to 512Mbit x8/x16 Technology

∗Support 1M, 2M, 4M, 8M, 32M, 64M x N DRAMs

∗Support DDR266/200 SDRAM

∗Expandable to 1GB

Expansion Slot ∗32-bit PCI slot x1 (Optional 2 PCI riser)

∗Mini PCI x1

Integrate IDE ∗Two PCI IDE controllers support PCI Bus Mastering, ATA

PIO/DMA and the ULTRA DMA 33/66/100 functions that deliver

the data transfer rate up to 100 MB/s

∗Two Serial ATA host controller with independent DMA operation on

2 port. Data transfer rates up to 1.5Gb/s

∗Compact flash connector (Optional custom build)

LAN On Board

∗VIA VT6103 PHY

∗Realtek RTL8100C 10/100 ( Optional custom build, RTL8110SB,

Intel 82559 10/100 or GbE RC82540 or RC82550PCI LAN

Controller chip)

Audio ∗AC’97 Digital Audio controller integrated

∗AC’97 2.2 Audio CODEC on board

∗Sound Blaster Pro compliant

∗Audio driver and utility included

BIOS ∗Phoenix/ Award 4MB Flash ROM

Multi I/O ∗PS/2 keyboard and PS/2 mouse connectors

∗Floppy disk drive connector x1

∗Parallel port x1, Serial port x2 (one on header)

∗USB 2.0 connector x6, (2 on header)

∗Audio connector Line-out, MIC

1-3 System Diagram

MX266 Mainboard Diagram

Otros manuales para MX266

Tabla de contenidos

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario