BCM BC845DL Manual de usuario

P4 Socket 478

Motherboard

BC845DL

User’s Manual

http://www.bcmcom.com

- -1

Declaration

Rights:

No part of this manual, including but not limited to the products and software described in it,

may be reproduced, transmitted, transcribes, stored in a retrieval system, or translated in any

form or by any means without the expressed written permission from the manufacturer.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies and are used only for identification or

explanation purposes without intent to infringe.

 Intel, MMX and Pentium are registered trademarks of Intel Corporation.

 Microsoft and Windows are registered trademarks of Microsoft Corporation.

 Whizpro are registered trademarks of Whizpro Inc.

 ITE is registered trademark of ITE Corporation

Responsibility:

This manual is provided “As-Is” with no warranties of any kind, either expressed or implied,

including, but not limited to the implied warranties or conditions of this product’s fitness for

any particular purpose. In no event shall we be liable for any loss of profits, loss of business,

loss of data, interruption of business, or indirect, special, incidental, or consequential damages

of any kind, even the possibility of such damages arising from any defect or error in this

manual or product. We reserve the right to modify and update the user manual without prior

notice.

WARNING: Replace your system’s CMOS RAM battery only with the identical CR-2032 3V

Lithium-Ion coin cell (or equivalent) battery type to avoid risk of personal injury or physical

damage to your equipment. Always dispose of used batteries according to the manufacturer’s

instructions, or as required by the local ordinance (where applicable).

References:

This manual is created and written by BCM Technical Dept., but not limited, to the

information from the BC845DL External Production Specifications, and BC845DL

Specifications. If any comments, suggestions, or errors for this manual, please write and e-

mail to support@bcmcom.com.

- -2

Compliance & Certificate

ISO 9001 Certificate:

This device was produced in our plant with advanced quality system certified by DNV QA

Ltd. in according to ISO 9001. This Certificate is valid for:

DESIGN & MANUFACTURE OF MOTHERBOARD AND PERSONAL COMPUTERS.

CE Declaration:

CE marking is a visible declaration by the manufacturer or his authorized representatives that

the electrical equipment to which it relates satisfies all the provisions of the 1994

Regulations.

FCC Compliance:

FCC stands for Federal Communications Commission.

This product complies with FCC Rules Part 15 and has been tested, and complied with the

EMI rules by a certified body. In normal operation, there shall be no harmful interference

caused by this device nor shall this device accept any interference received, including

interference that may cause undesired operation of this product.

Year 2000 Compliance:

This product is test to be qualified to bear the NSTL Year 2000 Compliant logo. Year 2000

problem is mainly a problem of computer software (OS), and the hardware issue. With the

support of BIOS on motherboard, the Y2K problem can be thoroughly conquered.

- -3

Easy Installation

Easy Installation Steps

The following “Easy Installation” steps are for users accustomed

to the assembly of a computer system. For those individuals

requiring more specific information, please refer to the more

detailed descriptions located within the latter chapters of this

manual.

Note: You must keep your power cable unplugged until the

following installation steps are completed.

Getting Started

Touch a grounded metal surface to release static electricity

stored in your body before unpacking your motherboard. For

details please refer to Precaution section in Chapter 3.

Install the CPU by correctly aligning the CPU with the socket

478 as noted in the motherboard diagram. Once aligned, press

down on the CPU gently but firmly and lock it. Next, install the

3.3 volt un-buffered DDR SDRAM into the 184 pin DIMM slots.

Please see Sec. 3.4.

Plug in any peripheral card(s) that you want to be included in the

setup. Please see Sec. 3.5.

Plug in all cables included in the package except for the power

cord. Please see Sec. 3.6.

Please recheck all steps to ensure no mistakes have been made

and then plug in the power cord and turn on the power to enter

the BIOS setup, Chapter 4.

- -4

Table of Contents

Declaration............................................................................................................... 1

Compliance & Certificate ....................................................................................... 2

Easy Installation ...................................................................................................... 3

1. Introduction ......................................................................................................... 5

1.1 How To Use This Manual ................................................................................ 5

1.2 Check Your Device Items ................................................................................ 5

2. Features ............................................................................................................... 6

2.1 Features Of The Motherboard ......................................................................... 6

3. Installation ...........................................................................................................8

3.1 Motherboard Layout & Main Parts ................................................................... 8

3.2 Connectors and Jumpers .............................................................................. 11

3.3 CPU (Central Processing Unit)...................................................................... 13

3.4 System Memory (DDR SDRAM) ................................................................... 14

3.5 Expansion Slots .............................................................................................15

3.6 Connectors, Headers, and Ports ................................................................... 16

4. BIOS Setup ........................................................................................................ 24

4.1 BIOS Setup ....................................................................................................24

4.2 Main Setup Menu...........................................................................................25

4.3 General Configuration Menu ......................................................................... 26

4.4 Advanced Configuration Menu ......................................................................28

4.5 System Specific Setup ................................................................................... 30

4.6 Primary IDE Drives ........................................................................................ 31

4.7 Secondary IDE Drives ................................................................................... 32

4.8 Peripherals Setup Menu ................................................................................ 33

4.9 Serial and Parallel ports.................................................................................34

4.10 Power Management Setup Menu ................................................................ 36

4.11 PCI /PnP Configurations Menu.................................................................... 38

4.12 Hardware Monitor ........................................................................................ 39

4.13 Restore Default Settings.............................................................................. 40

4.14 Exit ...............................................................................................................40

5. Troubleshooting................................................................................................41

5.1 General Troubleshooting Tips .......................................................................41

- -5

Introduction

1.1 How To Use This Manual

This manual provides information necessary for Original

Equipment Manufactures (OEMs) and home users to build

an ATX compatible system using Intel mPGA Socket 478

CPU motherboard. Follow the installation procedure

presented on the Easy Installation Page and refer to the

section number following each step if you require more

detailed instructions.

USER MANUAL

1.2 Check Your Device Items

The standard package should contain the following items. If

you find any of these items be missing or damaged, please

contact your retailer.

 1 BC845DL motherboard

 1 IDE ribbon cable (80-pin for UATA)

 1 floppy ribbon cable

 1 CD with drivers for BC845DL Motherboard and

user manual on PDF format.

CHECK ITEMS

WARNING:

Intel i845chipset only support 1.5 volts AGP graphic boards

(regardless of 2x or 4x). Therefore the 3.3 volts VGA

graphic boards cannot be install in a Pentium 4 system.

Wrongfully of plug in a 3.3V graphic board, the graphic

board as well as the motherboard will be destroyed after

installing a 3.3-volt graphic board.

- -6

Features

2.1 Features Of The Motherboard

This product is based on the ATX form factor. It features the Intel latest P4 socket 478

micro PGA socket and provides support for high performance Industrial and

workstation. This motherboard incorporates Intel 845 chipset. Providing extra features

such 4 Serial Port, 2 ISA, 2 DDR Memory Slot support up to 2GB of PC2100, Ultra

DMA 33/66/100 IDE interface, ACPI Power Management, 10/100Mbps LAN, USB

connectivity, and soft sound support.

Processor

 Single Intel478 Pin Micro PGA mechanism for IntelPentium 4 FC-PGA2 packages

 400MHz system bus

Core Logic Chipset

 Intel© 845B MCH (Memory Controller Hub) in 593 ball FC-BGA package

 Intel 82801BA ICH2 (I/O Controller Hub) in 360 ball EBGA Package

 Intel 82802AB 4Mb FWH (Firmware Hub) or equivalent

 ITE IT8808F PCI-to ISA bridge chip in 160-pin PQFP

System Memory

 Two 184-pin DIMM socket

 Supporting 2 double-sided DIMMS up to 2GB PC2100/PC1600 DDR ECC/Non ECC

memory

 Memory Type Support Double Data Rate (DDR) in 64Mb, 128Mb, 256Mb and 512Mb

technologies.

PCI Bus Master IDE Controller

 Two PCI IDE Connectors (support up to 4 IDE devices)

 Supports Ultra DMA: PIO mode 4, 33/ 66/ 100MB/s

LAN Support (Optional)

 ICH2 integrated with LAN controller, with 82562ET (10/100 LAN)

Integrated I/O

 Low Pin Count (LPC) 3.3V interface between FWH and ICH2

 1 Parallel Port (SPP/ECP/EPP/ECP+EPP)

 4 Serial Port- 2-DB9 (16C550 Fast UART Compatible) and 2-pin header set for serial

port with RS-422/485 feature (ITE8661 for second set of 16550 UART)

 1 PS/2 Keyboard Port, 1 PS/2 Mouse Port

 1 Floppy connector

 4 Standard USB Ports (2 from the front connector and 2 from the back ports)

 3 Fan connectors

 Hardware Monitor Capability (optional)

System BIOS

 4Mb Flash device in FWH

 PC-99 and PnP (Plug ‘n Play) compatible

- -7

Features

 Supports ACPI (Advanced Configuration and Power Interface), and APM (Advanced

Power Management)

 Supports to boot from CD-ROM, SCSI, IDE, FDD, ZIP, and LS-120

Green Features

 Power Management APM version 1.2

 WOL (Wake On LAN), WOR (Wake On Ring), wake-up are supported.

Sound System

 AC97 Revision v. 2.1 integrated in ICH2

 3 Audio Phone Jacks (Line-Out, Line-In, Mic-In) and 1 MIDI/Game port

 Includes one of each: Tel-In, CD-In, and Aux-In

Expansion Slots

 1 1.5V 4X/2X AGP slot (1.5V AGP Only)

 4 PCI slots

 1 ISA

 1 Shared PCI/ISA slot.

Mechanical

 This motherboard complies with the ATX Form Factor specification and has a four

layers with dimensions of 12” x 9.625”

- -8

Installation

3.1 Motherboard Layout & Main Parts

CPU Socket

DIMM 1

DIMM 2

Floppy

Primary

IDE

Secondary

IDE

Front Panel

Connector

COM4

Heade

COM3

Heade

PCI Slot

ISA Slot

ATX Power

12V Power

AGP Slot

- -9

Installation

Significant Parts List

Expansion Slots

CPU Socket Refer to Sec. 3.3

System Memory Refer to Sec. 3.4

Expansion Slots Refer to Sec. 3.5

Front Panel Connectors/Back Panel Ports

IrDA Connector (Part of Front Panel Header) Refer to Sec. 3.6.5

Sleep Connector (Part of Front Panel Header) Refer to Sec. 3.6.5

Power Switch Connector (Part of Front Panel Header) Refer to Sec. 3.6.5

Reset Switch Connector (Part of Front Panel Header) Refer to Sec. 3.6.5

HDD LED Connector (Part of Front Panel Header) Refer to Sec. 3.6.5

Power LED Connector (Part of Front Panel Header) Refer to Sec. 3.6.5

Keyboard/Mouse Ports Refer to Sec. 3.6.6

USB/LAN Ports Refer to Sec. 3.6.6

Printer/VGA/Serial Ports Refer to Sec. 3.6.6

Game/Sound Ports Refer to Sec. 3.6.6

Connectors

Primary IDE Connector Refer to Sec. 3.6.1

Secondary IDE Connector Refer to Sec. 3.6.2

Floppy Connector Refer to Sec. 3.6.3

Power Connector Refer to Sec. 3.6.4

CD-In (CD-ROM) Connector Refer to Sec. 3.6.7

Aux-In (Auxiliary Line-In) Connector Refer to Sec. 3.6.7

WOL (Wake On LAN) Connector Refer to Sec. 3.6.7

WOR (Wake On Ring) Connector Refer to Sec. 3.6.7

SCSI LED Connector Refer to Sec. 3.6.7

Telephony Connector Refer to Sec. 3.6.7

CPU Fan Connector Refer to Sec. 3.6.7

FAN 2 Connector Refer to Sec. 3.6.7

FAN 3 Connector Refer to Sec. 3.6.7

Chassis Intrusion Connector Refer to Sec. 3.6.7

Front USB Connector Refer to Sec. 3.6.7

Mono Out Connector Refer to Sec. 3.6.7

Serial Port 2 Connector Refer to Sec. 3.6.7

Speaker Connection (Optional) Refer to Sec. 3.6.7

Otros manuales para BC845DL

Tabla de contenidos

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario