BCM IN915GVE Manual de usuario

P4 Socket 775 Motherboard

IN915GVE

User’s Manual

http://www.bcmcom.com

Declaratio

USER’S NOTICE

THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY

BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY

FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE

MANUFACTURER.

THIS MANUAL CONTAINS INFORMATION NECESSARY TO USE OF IN915GVE

MOTHER-BOARD AND WE HAVE TRY TO INCLUDE IN THIS MANUAL AS MANY

INFORMATION AS POSSIBLE, BUT WE RESERVE RIGHT TO CHANGE, UPDATE

ANYTIME WITHOUT PRIOR NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS

IS ” WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY

INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES (INCLUDING

DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA,

INTERRUPTION OF BUSINESS OF ANY KIND ALIKE).

PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY

NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE

COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION

AND TO THE OWNER’S BENEFIT, WITHOUT INTENT TO INFRINGEMENT.

zIntel, Pentium

4 are registered trademarks of Intel ® Corporation.

zMicrosoft ® and Windows

are registered trademarks of Microsoft ® Corporation.

zPhoenix /Award

are registered trademarks of Phoenix Technologies LTD..

WARNING:

Incorrectly battery installation might cause battery to explode. Replace your system’s CMOS RAM

battery with the identical CR-2032 3V Lithium-Ion coin cell (or equivalent) battery type only to

avoid risk of personal injury or physical damage to your equipment. Lithium battery might content

toxic chemical, always dispose used batteries according to the manufacturer’s instructions, or as

required by the local ordinance (where applicable).

References:

This manual is created and written by BCM Technical Dept., but not limited, to the information

from the IN915GVE External Production Specifications, and IN915GVE Specifications. If any

comments, suggestions, or errors for this manual, please write an e-mail to support@bcmcom.com.

Compliance & Certificate

ISO 9001 Certificate:

This device was produced in our plant with advanced quality system certified by DNV QA Ltd. in

according to ISO 9001. The Certificate is valid for:

DESIGN & MANUFACTURE OF MOTHERBOARD AND PERSONAL COMPUTERS.

CE Declaration:

CE marking is a visible declaration by the manufacturer or his authorized representatives

that the electrical equipment to which it relates satisfies all the provisions of the 1994

Regulations.

FCC Compliance:

FCC stands for Federal Communications Commission.

This product complies with FCC Rules Part 15 and has been tested, and complied with the EMI

rules by a certified body. In normal operation, there shall be no harmful interference caused by this

device nor shall this device accept any interference received, including interference that may cause

undesired operation of this product.

Easy Installatio

The following “Easy Installation” steps are for users accustomed to the

assembly of a computer system. For those individuals requiring more

specific information, please refer to the more detailed descriptions

located within the latter chapters of this manual.

Note: You must keep your power cable unplugged until the following

installation steps are completed.

Getting Started

Touch a grounded metal surface to discharge static electricity stored in

your body before unpacking your motherboard. For details please refer

to Precaution.

Install the CPU by correctly aligning the CPU with the socket LGA775

(refer to CPU Installation Section). Next, install the 1.8 volt un-

buffered DDRII SDRAM into the 240 pin DIMM slots.

Plug in any peripheral card(s) that you want to be included in the

system .

Plug in all cables included in the package except for the power cord.

Please recheck all steps to ensure no mistakes have been made and then

lug in the power cord and turn on the power to enter the BIOS setup,

Chapter 3.

USER’S NOTICE

MANUAL REVISION INFORMATION

COOLING SOLUTIONS

CHAPTER 1 INTRODUCTION OF IN915GVE MOTHERBOARD

1-1 FEATURE OF MOTHERBOARD 3

1-2 SPECIFICATION 4

1-3 SYSTEM DIAGRAM 5

1-4 LAYOUT DIAGRAM 6

CHAPTER 2 HARDWARE INSTALLATION

2-1 HARDWARE INSTALLATION STEPS 8

2-2 CHECKING MOTHERBOARD'S JUMPER SETTING 8

2-3 INSTALL 9

2-3-1 GLOSSARY 9

2-3-2 ABOUT INTEL PENTIUM 4 LGA 775 CPU 10

2-4 INSTALL MEMORY 12

2-5 EXPANSION CARD 13

2-5-1 PROCEDURE FOR EXPANSION CARD INSTALLATION 13

2-5-2 ASSIGNING IRQ FOR EXPANSION CARD 13

2-5-3 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD 14

2-6 CONNECTORS, HEADERS 15

2-6-1 CONNECTORS 15

2-6-2 HEADERS 18

2-7 STARTING UP YOUR COMPUTER 21

CHAPTER 3 INTRODUCING BIOS

3-1 ENTERING SETUP 23

3-2 GETTING HELP 23

3-3 THE MAIN MENU 23

3-4 STANDARD CMOS FEATURES 25

3-5 ADVANCED BIOS FEATURES 27

3-6 ADVANCED CHIPSET FEATURES 29

3-6-1 DRAM TIMING SETTINGS 29

3-7 INTEGRATED PERIPHERALS 31

3-7-1

PCI EXPRESS FUNCTION 31

3-7-2

CHIPSET IDE DEVICES

3-7-3

ONBOARD DEVICES 33

3-7-4 LEGACY DEVICES 34

3-8 POWER MANAGEMENT SETUP 36

3-9 PNP/PCI CONFIGURATION SETUP 38

3-10 PC HEALTH STATUS 40

3-11 POWER BIOS FEATURE 41

3-12 LOAD STANDARD/OPTIMIZED DEFAULTS 41

3-13 SET SUPERVISOR/USER PASSWORD 42

Mechanical Draw

TABLE OF CONTENT

Manual Revision Information

Reversion Revision History Date

1.0 First Release Dec. 2005

Item Checklist

1 x IN915GVE Mainboard

1 x Cable for IDE/Floppy

1 x CD for motherboard utilities

1 x IN915GVE Quick Reference Guide

1 x IN915GVE User’s Manual Digital Format on CD or DVD

1 x IN915GV Standard I/O Shield

1 x SATA cable

□Cable for USB Port ¾ (Optional)

□S/PDIF Module (Optional)

Intel Pentium 4

Processor Family

Cooling Solutions

As processor technology pushes to faster speeds and higher performance, thermal management

becomes increasingly crucial when building computer systems. Maintaining the proper thermal

environment is key to reliable, long-term system operation. The overall goal in providing the

proper thermal environment is keeping the processor below its specified maximum case

temperature. Heatsinks induce improved processor heat dissipation through increased surface area

and concentrated airflow from attached fans. In addition, interface materials allow effective

transfers of heat from the processor to the heatsink. For optimum heat transfer, Intel recommends

the use of thermal grease and locking mechanism to attach the heatsink to the processor.

When selecting a thermal solution for your system, please utilize an Intel recommend heatsink for

use with Intel processors. Note, those heatsinks are recommended for maintaining the specified

Maximum T case requirement. In addition, this collection is not intended to be a comprehensive

listing of all heatsinks that support Intel processors.

Please visit Intel website below for CPU installation video :

http://www.intel.com/cd/channel/reseller/asmo-na/eng/100617.htm

Chapter 1

Introduction of IN915GVE Motherboard

1-2 Feature of motherboard

The IN915GVE motherboard is design for use Intel latest Pentium

4 LGA775 Processor, with

Hyper-Threading Technology supported, the Intel 915GV

Chipset delivers a high performance and

professional desktop, workstation platform solution. Which utilize the Socket LGA775 design.

IN915GVE motherboard use the Intel 915GV

Chipset Supports 533/800MHz System Bus in data

transfer rate.

Up to 2GB Dual Channel DDR2 Memories. DDR2 is the next generation memory technology to

replace the current DDR. With initial speeds from 400 and 533MHz, DDR2 memory provides

bandwidth up to 4.3GB/s. Doubled by the dual-channel architecture, the widest memory bus

bandwidth 8.6GB/s is achieved on this motherboard.

The ICH6R offers 4 SATA ports to provide speedier HDD throughout that boost overall system

performance, one PIDE connection support UDMA33/ATA 66/ATA 100, allows 2 IDE devices

connection.

With integrated Intel Graphics Media Accelerator 900 2D/3D supports 333MHz graphics core, and

supports hardware motion compensation assist for software MPEG/DVD decode, by using a PCIE x16

connector, for alternative graphics solution, the IN915GVE is the most valuable and flexible solution .

The IN915GVE motherboard include LAN onboard, an Realtek 10/100 PCI LAN Controller

(Optional Realtek Gbe).

Its also has integrated onboard an AC’97 2.1 Audio CODEC, which is fully compatible with Sound

Blaster Pro®that gives you the best sound quality and compatibility.

With USB control as well as capability of expanding to 8 USB2.0 function ports to meet faster data

transfer, built-in hardware monitor function. This enable system monitor and protect your computer.

These motherboards provided design in hardware to protect BIOS from virus crash BIOS data.

IN915GVE is the best value solution with high performance & Longevity for Embedded PC

Applications.

1-2 Specification

Spec Description

Design ∗Micro ATX form factor 4 layers PCB size: 9.6”(W) x 9.6”(D) (245 x

244 mm)

Chipset ∗Intel

915GV Graphics Memory Controller Hub (GMCH) Chipset

∗Intel

82801FB I/O Controller Hub (ICH6) Chipset

CPU Socket

(PLGA 775 Socket) ∗Support Intel Pentium 4 LGA775 processor

∗Support CPU Frequency 533/800MHz

∗Support Intel 775 Pin Celeron D 3xx/ Pentium 4 5xx/ 6xx processor

∗Reserves support for future Intel Pentium 4 processors

Video Display ∗Integrated Intel High Performance Graphics Media Accelerator 900

2D/3D, Graphics Core at 333MHz.

Memory Socket ∗240-pin DDRII SDRAM module socket x2

∗Support Memory Type 128Mbit, 256Mbit, 512Mbit and 1Gbit

Technology

∗Support Only 8x and 16x SDRAM device with 4 banks

∗Support 1.8V DDR2 400/DDR2 533

∗Expandable to 2GB

Expansion Slot ∗1x PCI Express x16 slot (by 4 lines) for PCI Express VGA

∗3x 32-bit PCI slot (PCI v2.3 compliant)

Integrate IDE ∗One IDE interface support PCI Bus Mastering, ATA PIO/DMA and

the ULTRA DMA 33/66/100 functions that deliver the data transfer

rate up to 100 MB/s, support up to 2 IDE device.

SATA ∗Four Serial ATA host controller with independent DMA operation on

all ports.

∗Data transfer rates up to 1.5Gb/s

USB ∗8x USB connectors, USB 2.0 compliant (4 connectors at rear panel

and 4 on board header)

LAN ∗Realtek RTL8100C

10/100 LAN

Audio ∗AC’97 Digital Audio controller integrated

∗On board Realtek ALC-655 AC’97 2.3 Audio CODEC

∗2 or 6 Channel Audio selectable

∗Audio driver and utility included

BIOS ∗Phoenix

Award 4MB Flash ROM

Multi I/O ∗PS/2 keyboard and PS/2 mouse connectors

∗Floppy disk drive connector x1

∗Parallel port x1, Serial port x2 (one on header)

∗Audio connector Line-in, Line-out, MIC

1-3 System Diagram

IN915GVE Mainboard Diagram

Tabla de contenidos

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario