BCM IN845GVD Manual de usuario

P4 Socket 478 Motherboard

IN845GVD

User’s Manual

http://www.bcmcom.com

Declaration

Rights:

No part of this manual, including but not limited to the products and software described in it, may

be reproduced, transmitted, transcribes, stored in a retrieval system, or translated in any form or by

any means without the expressed written permission from the manufacturer.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies and are used only for identification or explanation

purposes without intent to infringe.

zIntel, Pentium®4 are registered trademarks of Intel Corporation.

zMicrosoft and Windows®are registered trademarks of Microsoft Corporation.

zPhoenix®and Award®are registered trademarks of Phoenix Technologies LTD..

Responsibility:

This manual is provided “As-Is” with no warranties of any kind, either expressed or implied,

including, but not limited to the implied warranties or conditions of this product’s fitness for any

particular purpose. In no event shall we be liable for any loss of profits, loss of business, loss of

data, interruption of business, or indirect, special, incidental, or consequential damages of any kind,

even the possibility of such damages arising from any defect or error in this manual or product.

We reserve the right to modify and update the user manual without prior notice.

WARNING:

Replace your system’s CMOS RAM battery only with the identical CR-2032 3V Lithium-Ion coin

cell (or equivalent) battery type to avoid risk of personal injury or physical damage to your

equipment. Always dispose of used batteries according to the manufacturer’s instructions, or as

required by the local ordinance (where applicable).

References:

This manual is created and written by BCM Technical Dept., but not limited, to the information

from the IN845GVD External Production Specifications, and IN845GVD Specifications. If any

comments, suggestions, or errors for this manual, please write an e-mail to [email protected].

Compliance & Certificate

ISO 9001 Certificate:

This device was produced in our plant with advanced quality system certified by DNV QA Ltd. in

according to ISO 9001. This Certificate is valid for:

DESIGN & MANUFACTURE OF MOTHERBOARD AND PERSONAL COMPUTERS.

CE Declaration:

CE marking is a visible declaration by the manufacturer or his authorized representatives that the

electrical equipment to which it relates satisfies all the provisions of the 1994 Regulations.

FCC Compliance:

FCC stands for Federal Communications Commission.

This product complies with FCC Rules Part 15 and has been tested, and complied with the EMI

rules by a certified body. In normal operation, there shall be no harmful interference caused by this

device nor shall this device accept any interference received, including interference that may cause

undesired operation of this product.

Year 2000 Compliance:

This product is test to be qualified to bear the NSTL Year 2000 Compliant logo. Year 2000

problem is mainly a problem of computer software (OS), and the hardware issue. With the support

of BIOS on motherboard, the Y2K problem can be thoroughly conquered.

Easy Installation

Easy Installation Steps

The following “Easy Installation” steps are for users

accustomed to the assembly of a computer system. For those

individuals requiring more specific information, please refer

to the more detailed descriptions located within the latter

chapters of this manual.

Note: You must keep your power cable unplugged until the

following installation steps are completed.

Getting Started

Touch a grounded metal surface to release static electricity

stored in your body before unpacking your motherboard. For

details please refer to Precaution.

Install the CPU by correctly aligning the CPU with the socket

478 as noted in the motherboard diagram. Once aligned,

ress down on the CPU gently but firmly and lock it. Next,

install the 3.3 volt un-

uffered DDR SDRAM into the 184

pin DIMM slots.

Plug in any peripheral card(s) that you want to be included in

the setup.

Plug in all cables included in the package except for the

power cord.

Please recheck all steps to ensure no mistakes have been

made and then plug in the power cord and turn on the power

to enter the BIOS setup, Chapter 3.

USER’S NOTICE 1

MANUAL REVISION INFORMATION 1

COOLING SOLUTIONS 2

CHAPTER 1 INTRODUCTION OF IN845GVD MOTHERBOARD

1-1 FEATURE OF MOTHERBOARD 3

1-2 SPECIFICATION 4

1-3 LAYOUT DIAGRAM & JUMPER SETTING 5

CHAPTER 2 HARDWARE INSTALLATION

2-1 HARDWARE INSTALLATION STEPS 7

2-2 CHECKING MOTHERBOARD'S JUMPER SETTING 7

2-3 INSTALL CPU 9

2-3-1 GLOSSARY 9

2-3-2 ABOUT INTEL PENTIUM 4 478-PIN CPU 10

2-4 INSTALL MEMORY 11

2-5 EXPANSION CARD 12

2-5-1 PROCEDURE FOR EXPANSION CARD INSTALLATION 12

2-5-2 ASSIGNING IRQ FOR EXPANSION CARD 12

2-5-3 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD 13

2-6 CONNECTORS, HEADERS 13

2-6-1 CONNECTORS 13

2-6-2 HEADERS 17

2-7 STARTING UP YOUR COMPUTER 22

CHAPTER 3 INTRODUCING BIOS

3-1 ENTERING SETUP 23

3-2 GETTING HELP 23

3-3 THE MAIN MENU 24

3-4 GENERAL CONFIGURATION 26

3-5 ADVANCED CONFIGURATION 28

3-6 PRIMARY IDE DRIVES/ SECONDARY IDE DRIVES 30

3-7 INTEGRATED PERIPHERALS 32

3-8 POWER MANAGEMENT 34

3-9 PCI/PNP CONFIGURATION 36

3-10 HARDWARE MONITOR 37

3-11 RESTORE MANUFACTURE SETTINGS 38

3-12 EXIT 38

Mechanical Draw 39

TABLE OF CONTENT

USER’S NOTICE

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE

REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY

ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER.

THIS MANUAL CONTAINS ALL INFORMATION NECESSARY TO USE OF RX845GL/IN845GL

MOTHER-BOARD AND WE DO ASSURE THIS MANUAL CONTENT AS MANY INFORMATION AS

POSSIBLE, BUT WE RESERVE RIGHT TO CHANGE, UPDATE ANYTIME WITHOUT PRIOR NOTICE.

MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND,

AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR

CONSEQUENTIAL DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF

BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS OF ANY KIND ALIKE).

PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE

REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND

THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S

BENEFIT, WITHOUT INTENT TO INFRINGEMENT.

Manual Revision Information

Reversion Revision History Date

1.0 First Release Mar. 2005

Item Checklist

5IN845GVD Mainboard

5Cable for IDE/Floppy

5CD for Mainboard Driver Utilities/ Manual

5IN845GVD Quick Installation Guide

5ATX I/O Shield

□Cable for USB Port 3/4 (Optional)

Intel Pentium 4 Processor Family

Cooling Solutions

As processor technology pushes to faster speeds and higher performance, thermal management becomes

increasingly crucial when building computer systems. Maintaining the proper thermal environment is

key to reliable, long-term system operation. The overall goal in providing the proper thermal

environment is keeping the processor below its specified maximum case temperature. Heatsinks induce

improved processor heat dissipation through increased surface area and concentrated airflow from

attached fans. In addition, interface materials allow effective transfers of heat from the processor to the

heatsink. For optimum heat transfer, Intel recommends the use of thermal grease and mounting clips to

attach the heatsink to the processor.

When selecting a thermal solution for your system, please refer to the website below for collection of

heatsinks evaluated and recommended by Intel for use with Intel processors. Note, those heatsinks are

recommended for maintaining the specified Maximum T case requirement. In addition, this collection is

not intended to be a comprehensive listing of all heatsinks that support Intel processors.

For vendor list of heatsink and fan, please visit :

http://developer.intel.com/design/Pentium4/components/index

Chapter 1

Introduction of IN845GVD Motherboard

1-1 Feature of motherboard

The IN845GVD motherboard has been updated to support Intel latest Celeron D and Intel Pentium 4

Processor in 478 Pin Package up to 533Mhz FSB Processor with Hyper-Threading Technology support,

the Intel 845GV Chipset delivers a high performance and professional platform solution. Which utilize

the P4 Socket 478 design and the memory size expandable to 2.0GB.

IN845GVD motherboard use the Intel 845GV Chipset Supports 400/533MHz System Bus in data

transfer rate, This motherboard provided a wide range of memory choices with 133 SDRAM clock

frequency to support DDR333/266/200 DDR SDRAM. This motherboard offers ULTRA ATA 100 to

provide speedier HDD throughout that boosts overall system performance.

With integrated 2D/3D Graphics Accelerator which supports 256 bit graphics core, and supports hardware

motion compensation assist for software MPEG/DVD decode, makes this board a low cost alternative to a

add on video card. The IN845GVD also provide LVDS DFP support those who wish to use of a digital

display.

The IN845GVD motherboard including PCI LAN Controller chip support 10/100 Mb/sec Base transfer

rate.

Its also has integrated onboard AC’97 2.1 audio CODEC support 3D surround positioning Audio,

which is fully compatible with Sound Blaster Pro®that gives you the best sound quality and

compatibility.

With USB control as well as capability of expanding to 6 USB2.0 function ports to meet faster data

transfer, built-in hardware monitor function. This enable system monitor and protect your computer.

These motherboards provided design in hardware to protect BIOS from virus crash BIOS data.

IN845GVD provides high value for embedded application. It is really wise choice of computing

solution.

1-2 Specification

Spec Description

Design ∗Micro ATX form factor 4 layers PCB size: 9.5”(W) x 9(D)

(24.4x23.0cm)

Chipset ∗Intel 845GV Graphics Memory Controller Hub (GMCH)

Chipset for IN845GVD

∗Intel 82801DB I/O Controller Hub (ICH4) Chipset

CPU Socket

(mPGA478B Socket) ∗Support Intel Pentium 4/Celeron/Celeron D 478 Pin package

utilizes Flip-Chip Pin Grid Array (FC-PGA2) package

processor

∗Support CPU Frequency 400MHz & 533MHz

∗Support 1..5G∼3.0G 478 Pin Pentium 4 processor

∗Reserves support for future Intel Pentium 4 processors

Graphics ∗Integrated Intel High Performance Extreme Graphics 2 2D/3D

∗24-bit Single/Dual Channel LVDS Interface

Memory Socket ∗184-pin DDR SDRAM module socket x2

∗Support Memory Type 64Mb to 512Mb Technology

∗Support Only 8x and 16x SDRAM device with 4 banks

∗Support DDR333/DDR266/DDR200 SDRAM (DDR333 at

533MHz FSB Only)

∗Expandable to 2.0GB

Expansion Slot &

Headers ∗32-bit PCI slot x3

∗CNR slot x1 (Optional)

Integrate IDE ∗Two PCI IDE controllers support PCI Bus Mastering, ATA

PIO/DMA and the ULTRA DMA 33/66/100 functions that

deliver the data transfer rate up to 100 MB/s

LAN On Board

∗Realtek RTL8100BL PCI LAN Controller chip

∗Supports 10/100 Mb/sec data transfer rate

Audio ∗AC’97 Digital Audio controller integrated

∗AC’97 2.1 Audio CODEC on board

∗Sound Blaster Pro compliant

∗Audio driver and utility included

BIOS ∗Award 2MB Flash ROM

Multi I/O ∗PS/2 keyboard and PS/2 mouse connectors

∗Floppy disk drive connector x1

∗Parallel port x1, Serial port x2

∗USB 2.0 connector x2

∗USB 2.0 headers x2 (connecting cable option)

∗Audio connector Line-in, Line-out, MIC & Game Port

1-3 Layout Diagram & Jumper Setting

IR Connector

Front Panel Audio

PC99 Back Panel

CD Audio

PCI Slot

DFP LVDS Conn

Floppy Connector

Intel 845GV Chip

Front Panel Connector

ATA 100 IDE Conn.

Clear CMOS (JP4)

ATX Power Conn.

(USB3, USB2)

USB Port

CPU FAN

2MBit Flash ROM BIOS

CPU 478 Socket

DDR DIMM X2

Wake On LAN

SYSFAN

ATX 12V Power Conn.

USB Port

/LAN Connector

PS2 KB/Mouse Port

LINE-OUT

LINE-IN

MIC

GAME/MIDI PORT

COM1 VGA

PS/2 MOUSE

PS/2 Keyboard

USB

LAN

ATX P9 Power Conn.

SYSFAN2

COM2 Connector

Speaker

Tabla de contenidos

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario